service SKODA SUPERB 2007 1.G / (B5/3U) SymphonyCD Car Radio Manual

GB
3
Brief outline of operation
Push / turning knob
- Turning on and off (press). . . . . . 5
- Volume control (turn) . . . . . . . . . 5
- More setting functions in diverse menus
AUD
- Sound setting for treble and bass. . . . . . . . . . . . . . 5
GEOmetry
- Sound tone (balance, fader) . . . . 5
A/F - AM/FM band change . . . . . . . . . 6
- Memory range switching . . . . . . . 7
TP
- Radio traffic service . . . . . . . . . 6,9
- Calling up the set-up menu . . . . 12 Rocker button
- Station scan up/down . . . . . . . . . 7
- Menu up/down . . . . . . . . . . . . . 12
- CD control . . . . . . . . . . . . . . . . 10
1....6
- Radio station buttons . . . . . . . . 7
- CD changer control . . . . . . . . . 11
AS
- Automatic store . . . . . . . . . . . . . 7
SCN
- Wavelength range scan . . . . . . . 8
- CD scan . . . . . . . . . . . . . . . 10,11
Flashing LED
. . . . . . . . . . . 13, 17
CD Shaft . . . . . . . . . . . . . . . . . . 10
CD
- CD operation/CD ejection . . . . . 11 AIM
- TIM (Traffic Information Memory) 8
Anti-theft security
. . . . . . . . 4,17
Display indications:
TP: Traffic program stations set 6
FM1 VHF memory locations 1-6 . 6
FM2 VHF memory locations 7-12. 6
AM1 LW /MW
Memory locations 1-6 . . . . . . . . . 6
AM2 LW /MW Memory locations 7-12 . . . . . . . . 6
Radio traffic service range
Memory locations 1-6 . . . . . . . . . 6
Station numbers . . . . . . . . . . . . 7
Item Function Page
Item Function Page
Item Function Page









 

 \b

20
21
21
21
21
21
22

Radio operation
Switching range
Your radio is equipped with a receiver for the
FM and AM bands. There are 6 memory
locations in the FM 1, FM 2 and TP ranges
and in the AM range there are 6 memory
locations each in AM 1 and AM 2. The selec-
ted range is shown in the display, item .
When the AM band is scanned, stations are
sought on the LW band and the MW band
successively.
Switch-over AM - FM:
• By depressing button \b for a few
moments, A/Fswitches your appliance
between the bands AM and FM. In each
case the last program heard is set.
Switching between FM 1 and FM 2
(Display = FM) :
• Press the A/Fbutton \bbriefly to switch
between the ranges FM1 (memory loca-
tions 1 to 6) and FM2 (memory locations 7
to 12). Here the program last heard in this
range is set.
Switching between AM 1- AM 2
(Display = AM):
• Press the A/Fbutton \bbriefly to switch
between the AM1 and AM2 ranges.
Here, the program in this range which was
last heard is set.
Switching to TP (radio traffic service
active, display ):
• Press the TPbutton briefly to switch to
the TP Range ( Traffic Program). In this
range only programs with radio traffic ser-
vice (TP programs) can be set. Traffic
announcements are broadcast always in a
minimum volume which can be set in the
set-up menu. The reports also interrupt
the CD playback. After the traffic report,
the appliance switches back to the pre-
vious operating state. TP programs are indicated in the display

by "TP”. The broadcasting of a
traffic report is indicated in the display by
"
INFOPRGNAME”. If there is no longer any
reception for the set TP program, the
appliance switches automatically to the next
TP Program with clear reception. "
NO TPTP
SEEK“ then appears in the display. If you
do not wish to receive any traffic report,
listen to the program you wish in one of the
FM ranges: FM1 or FM2.
6
4321
FM1 4
TP
SYMPHONY
TP
2120
45

Radio operation
RDS functions
RDS, (Radio Data System) makes it pos-
sible to show the name of the program
received.
During the drive RDS automatically as-
sumes the function of seeking and if
necessary setting alternative frequencies
for the set program to ensure the best
possible reception within a transmitting
range even under unfavourable condi-
tions.
Storing RDS Programs
When storing RDS programs, the corre-
sponding station button must not be
pressed until its program name is shown
in the display. This ensures to a large
extent that all RDS data can be evaluated
and stored if required.
T ake care also that no "scroll text” is
shown in the display when storing as this
will be stored instead of the program
name then.
When a stored RDS program is called up,
the corresponding program name appears
in the display. If the reception of the
stored frequency is not good, the appli-
ance automatically selects an alternative
frequency (best station function) of the
same program.
General Information
In unfavourable conditions, e.g. on moun-
tainous stretches, the appliance checks
alternative frequencies very often. This
may cause momentary muting.
Mode of operation of RDS
In addition to the normal radio signal, an
inaudible digital flow of data is sent with
RDS. This flow contains among other
things the following data:
Program identification (PI Code):
With the PI code, the radio recognises the
program just received.
Program Service Name (PS code):
The PS code transmits the name which is
to be shown in the display.
The PS code is used by some programs
to transmit additional information which is
shown in the display.
Alternative frequencies (AF List):
A program is normally transmitted from
several broadcasting stations on different
frequencies. The AF list contains the fre-
quencies which this receiver can set for
this program. T
raffic Broadcast Code (TP
Code = Traffic
Program):
Code for a radio traffic service station.
Announcement Code (T
A =Traffic
Announcement):
With the TA Code, the appliance recog-
nises a radio traffic service announce-
ment. If necessary, the volume of the
appliance is raised and the CD operation
interrupted.
Music /Speech switchover (MS Code)
For spoken programs the MS code
switches the frequency to good speech
intelligibility.
Catastrophe reports
(RDS Code designation =PTY 31)
Catastrophe reports have priority above
all other functions.
EON (
Enhanced information concerning
Other Networks),
Programs which use EON take over traffic
announcements from other programs.
During a report the name of the other pro-
gram is shown in the display.
9
GB

CD operation
Playback ScanRadio CD operation
T itle selection Shuffle (Random generator) CD Ejection
Playback
Push a CD (label upwards) carefully in the
CD tray until it is automatically drawn in
further. Playback begins automatically.
PLAY
CD TR y (y=track number) appears in the
display.
Ti tle selection
Pressing the rocker button  or  moves
forwards or backwards to the next track.
Fast forwards and reverse
This function makes it possible for you, by
listening in to the fast forwards and reverse,
to search for a particular point within a song.
Keep the rocker button 

or 
depressed until the respective point is found.
Scan
When the SCN button  is pressed, all titles
in the CD are played for ca. 10 sec. one after
another. The function is indicated in the
display by
SCANCD TR y. Press the SCN
button
 again and the compact disc player
returns to normal operation.
Shuffle (random generator)
Press the button AS\band the CD titles are
sequenced at random. The function is indica-
ted in the display by
SHFFLCD TR y. Press
the ASbutton
\bagain and the CD player
returns to normal operation.
Switching over to radio operation
Press the A/F or TP
button to switch to
radio operation. The CD is not ejected then.
CD Playback is restarted by briefly pressing
the CD button again.
CD Ejection
By depressing the CD button for a few
moments, the CD is ejected and, depending
on the setting, switched to radio operation.
If the CD is not taken out, this will be drawn
back into the CD shaft after a few seconds.
CD operation and Radio traffic service
If the radio was operated in TP mode before
switching to CD operation, the traffic
announcements will interrupt the CD playback
and switch over to radio operation for the
duration of the report. Once the traffic
announcements are over, the car radio will
switch automatically to CD operation again.
Te mperature-related disconnection
If the temperature in the car radio exceeds
85°C, a safety disconnection mechanism
switches off the CD player. As soon as the
temperature drops below 85°C, the compact
disc player is activated again.
Tips on handling CDs
• CDs are very sensitive to scratching. For
that reason do not leave CDs lying around
in your vehicle without protection. Keep the
CDs exclusively in special boxes.
10
AUDIOGEO
21MUSIC SYSTEM 303
FM1 4
TP
SY
TP
SCANAS
6
12
11
45
9
6
8

Set-up menu
or
• by depressing the TPbutton for a few
moments, you can leave the set-up
menu without storing this change.
PH VOL
If the telephone call is transmitted through
the speakers in your vehicles, you can set
the playback volume under this menu
point.
• Select PH VOL in the menu. The display
shows "PH VOL” with the current value.
• Use the turning knob
to set the de-
sired value from 1 to 45.
• By briefly pressing the TPbutton or
the rocker button  , you can store
the indicated value and go to the next
menu point
or
• by depressing the TPbutton for a few
moments, you can leave the set-up
menu without storing this change. TA
VOL
This menu point is for setting the minimum
volume for radio traffic service announce-
ments. In TP operation, the volume can be
raised to the set value if necessary. This
means you can drive with the radio set
low and still be informed about the current
traffic situation.
• Select TAVOL in the menu. The display
shows "TA VOL” with the current value.
• Use the turning knob
to set the de-
sired value from 1 to 9.
• By briefly pressing the TPbutton or
the rocker button  , you can store
the indicated value and go to the next
menu point
or
• by depressing the TPbutton for a few
moments, you can leave the set-up
menu without storing this change.
CD SFL
Decide in this menu point whether the ti-
tles should be selected with random play-
back (shuffle) from a connected CD
changer only within one CD (CD SFL D )
or the whole magazine ( CD SFL M).
• Select CD SFL in the menu. The display
shows "CD SFL” with the current value. • Use the turning knob

to set the de-
sired value of D or M.
• By briefly pressing the TPbutton or
the rocker button  , you can store
the indicated value and go to the next
menu point
or
• by depressing the TPbutton for a few
moments, you can leave the set-up
menu without storing this change.
KEY
This menu point is for setting whether the
radio should be turned off too when the
ignition key is taken out (KEY ON) or
whether the radio should be turned on and
off exclusively with the pushbutton

(KEY OFF).
• Select KEYin the menu. The display
shows "KEY” with the current value.
• Use the turning knob
to set ON or
OFF.
• By briefly pressing the TPbutton or
the rocker button  , you can store
the indicated value and go to the next
menu point
or
15
GB

Brief technical description
Brief technical description
General
Connections
Active antenna, mobile telephone, CD
changer, external final stage
Displays
Wavelength range, station name, fre-
quency, station button, Traffic Program
(TP), CD title number display
Illumination
Operating elements and display are illu-
minated without glare when the vehicle
illumination is switched on (night design).
The degree of brightness is adjustable
with the instrument illumination.
Theft protection
Electronic barrier in the appliance. If the
appliance is fitted into another vehicle, it
can only operate if the right code number
is entered.
Interference suppression
Specifically co-ordinated interference
suppression removes to a large extent all
interfering pulses from the engine and
from other parts in the electrical system,
e.g. heating fans, windscreen wipers,
cooling ventilators etc
Radio
Reception ranges
FM (UKW/VHF),AM, MW and LW,
Program selection
Automatic broadcast of the program set
before turning off (Last Station Memory)
in radio operation.
Six station buttons in each case for AM1,
AM2, FM1, FM2 and TP. Manual adjust-
ment up and down, PLL Tuning (PLL =
Phase-Locked Loop).
After switching on the radio, the last
received program is set again (Last
Station Memory.
Radio traffic service unit
Automatic station scan
Automatic announcements
TIM (recording of traffic announcements),
TIM standby mode for 2 or 24 hours.
CD drive and CD changer control
T itle selection, random playback, auto-
matic stop and radio switchover with traf-
fic announcements, CD selection in the
changer operation.
Audio
maximum output power
4 x 20 watts
Playback
Stereo (radio and CD), active sound
regulation, loudness, fader integrated in
the radio.
Alterations and misprints excepted.
May not be reprinted, copied or transla-
ted without Skoda’s prior authorisation.
19
GB

Key-word Index
A
AF list . . . . . . . . . . . . . . . . . . . . . . . . .9
AIM button . . . . . . . . . . . . . . . . . . . . .8
Alternative frequencies . . . . . . . . . . . . .9
AM button . . . . . . . . . . . . . . . . . . . . . .6
Appliance number . . . . . . . . . . . . . . . 4
Automatic interference suppression . .19
Automatic storing . . . . . . . . . . . . . . . . .7
B
Balance . . . . . . . . . . . . . . . . . . . . . . . .5
Bass setting . . . . . . . . . . . . . . . . . . . .5
Brief instructions . . . . . . . . . . . . . . . . . .3
Brief technical description . . . . . . . . . .18
C
Catastrophe announcements . . . . . . . .9
CD changer operation (optional) . . . . .11
CD ejection . . . . . . . . . . . . . . . . . . . . .11
CD operation . . . . . . . . . . . . . . . . . . .10
Code number . . . . . . . . . . . . . . . . . . . .4
Coding . . . . . . . . . . . . . . . . . . . . . .4,17
Comfort coding . . . . . . . . . . . . . . . .4,17
Connections. . . . . . . . . . . . . . . . . . . .19
D
Display indications . . . . . . . . . . . . . .3,11
F
Fader . . . . . . . . . . . . . . . . . . . . . . . . . .5Fast forwards/reverse . . . . . . . . . .10,11
Flashing diode . . . . . . . . . . . . . . . . . .17
FM button . . . . . . . . . . . . . . . . . . . . . . .6
G
GALA. . . . . . . . . . . . . . . . . . . . . . . . .13
General view . . . . . . . . . . . . . . . . . . . .2
Geometry . . . . . . . . . . . . . . . . . . . . . .5
Guarantee . . . . . . . . . . . . . . . . . . . . .18
I
Illumination . . . . . . . . . . . . . . . . . . . . .19
L
LED . . . . . . . . . . . . . . . . . . . . . . . . . .17
M
Manual search . . . . . . . . . . . . . . . . . . .7
Manual storing . . . . . . . . . . . . . . . . . .7
Music/Speech switchover . . . . . . . . .9,14
MW . . . . . . . . . . . . . . . . . . . . . . . . . . .6
O
Output power . . . . . . . . . . . . . . . . . .19
P
PI code . . . . . . . . . . . . . . . . . . . . . . . .9
Playback (CD) . . . . . . . . . . . . . . . . . .10
Playback (radio traffic
service recording) . . . . . . . . . . . . . . . . .8
PS code . . . . . . . . . . . . . . . . . . . . . . .9PTY 31 . . . . . . . . . . . . . . . . . . . . . . . . .9
R
RDS . . . . . . . . . . . . . . . . . . . . . . . . . .9
Reception ranges . . . . . . . . . . . . . . . . 6
Regional stations . . . . . . . . . . . . . . . .14
S
Scan (CD drive) . . . . . . . . . . . . . . .10,11
Scan (radio operation) . . . . . . . . . . . . .7
Set-up menu . . . . . . . . . . . . . . . . . . .12
Sound setting . . . . . . . . . . . . . . . . . . . .5
Station buttons . . . . . . . . . . . . . . . .7,11
Storing automatically /manually . . . . . .7
Storing RDS stations . . . . . . . . . . . . . .8
T
TA
code . . . . . . . . . . . . . . . . . . . . . . . .9
TIM . . . . . . . . . . . . . . . . . . . . . . . . . . .8
TP code . . . . . . . . . . . . . . . . . . . . . . .6
T raffic announcement . . . . . . . . . . .6,8,9
T reble setting . . . . . . . . . . . . . . . . . . .5
V
V olume adjustment (ON VOL) . . . . . . 13
20