CD player SKODA SUPERB 2012 2.G / (B6/3T) Swing Car Radio Manual

Table of Contents
General information
Owner's Manual
2
Symbols in the text of the operatinginstructions
2
Equipment overview
2
Important information
2
Anti-theft protection
3
Basic setting
3
Radio mode
4
CD player
Using the system
61Table of Contents

General information
Owner's Manual
This Owner's manual describes all possible equipment variants without identify-ing them as special equipment, model variants or market-dependent equipment.
Consequently, this vehicle does not need to contain all of the equipment compo-nents described in this Owner's manual.
The scope of equipment for your vehicle is described in the sales documentationyou were given when purchasing the car. For more information, contact your localŠKODA retailer.
Ð
Symbols in the text of the operating instructions
Explanation of symbolsÐ End of a section.
 The section is continued on the next page.
Ð
Equipment overview
Control button›Switching radio on and off›Volume control (rotate)Menu control button›Call up the menu settings of the parameter for radio or CD player›Activating the function ScanButton MEDIA to activate the play function of audio sourcesButton RADIO to activate the radio mode ›fast station finding in radio mode›Select the track in the CD mode, fast forward/backward search in the CDmodeINFO›Display of radio text information›Display of additional information of MP3-CDs
123456Button  for adjusting the soundButton AS automatically stores the stationButton TP to activate the reception of traffic reportsCD caseCD - eject buttonStation keys›store and select the RDS station›CD selection›Enter code
Ð
Important information
Warranty
The equipment warranty terms and conditions also apply for new vehicles.
After the expiration of the warranty, a piece of equipment in need of repair will bereplaced with a reconditioned, original item with spare part warranty. It is, howev-er, a precondition that the housing has not been damaged and no unauthorisedattempts have been made to carry out repairs.
Note
Damage within the meaning of the warranty must not be the result of improperhandling of the system or from unprofessional repair attempts. It is also essentialthat there is no external damage.
Ð
Device operation
The unit should only be used, if the traffic situation permits it.
The volume settings must be selected in such a way that audible signals from theoutside, e.g. a Martins horn from utility vehicles (police cars, ambulances and firebrigade), can be heard at all times.
WARNINGPlease concentrate fully at all times on your driving! As the driver you are fullyresponsible for road safety. Only use the functions of the radio in such a waythat you are always in full control of your vehicle in all traffic situations!
Ð
7891011122General information

›PDC VOL - If your vehicle has been fitted with the “Parking aid (PDC)” driver'sassistant system, the volume is automatically reduced to a pre-defined valuewhen the “parking aid (PDC)” is active;›GALA - the car radio will increase the volume in response to an increase inspeed (higher figures result in a steeper increase in volume);›LOUD - in case of low volume level, this function reinforces the range of bassand treble frequencies.
Ð
Setting the special functions
›
Press the menu control button
2
for a long period of time.
›
Select the individual functions of the menu with the help of the station keys.
›
Set the desired value using the menu control button
2
or with the help of thestation keys.
AUXSwitching on or off the functions of the external audio source.
Setting of the input sensitivity AUX LEV:
›LEV 1 - high level, used in particular for notebooks;›LEV 2 - middle level, used for cassettes or CD player;›LEV 3 - low level, used for MP3 player.
PHONEIf your vehicle is equipped with a handsfree system, you can switch on or off themonophone play function of the mobile phone calls via the loudspeakers of thevehicle.
BEEPSwitching on or off the tone signal when storing the radio stations.
ILLUMSwitch on (value 2) or switch off (value 1) the rear lighting of the control buttons.
AFThe function alternative frequency (AF) ensures that the best receivable frequen-cy of the selected station is automatically and precisely set. The replay of thebroadcast can be muted briefly during the search process according to the bestreceivable frequency. If no alternative frequency of the set station can be foundand the station no longer offers a satisfactory quality, then please select anotherstation.
REGCertain programs of the broadcasting companies are divided into regional pro-grams at specific times. That is why in individual regions the regional programs ofa station can broadcast different contents.
First of all the unit attempts to set only alternative frequencies of the selectedstation.
If the quality is however so low, that there is a risk of a “program loss”, the unitalso accepts “related” frequencies.
›FIX - the receiver switches to a regional “related” station, if the reception of thecurrent station could be interrupted;›AUTO - the receiver can access the regional “related” station unlimited.
BT-AUDIOEnables a wireless transfer of MP3 data from the telephone preinstallation.
Ð
Radio mode
Changing the frequency band
›
Press the button RADIO.
Your radio is equipped with FM and AM wavebands. They are divided in 6 memorylevels, i.e. 3 levels for FM and 3 levels for AM.
Activation of the FM bandActivate the FM band by pressing the RADIO button for a long time followed bythe FM
12
button. By briefly pressing the button RADIO, you can select betweenthe memory levels FM1, FM2 and FM3.
Activation of the AM bandActivate the AM band by pressing the RADIO button for a long time followed bythe AM
12
button. By briefly pressing the button RADIO, you can select betweenthe memory levels AM1, AM2 and AM3.
Ð
The process of searching for and storing the radio stations
Manual search
›
Search the frequency of the desired radio station by turning the menu controlbutton
2
.
4General information

CD player
Using the system
Inserting the CD
›
Press the button MEDIA, in order to select the audio source: CD (internal CDdrive), CDC (external CD changer), AUX/MDI (external input) and BT-AUDIO(wireless transfer of MP3 data from the telephone preinstallation).
›
Carefully insert a CD into the CD case
10
until it is automatically drawn in. Theplay function begins automatically.
Ð
Operating the CD player
Select track
›
Briefly press the rocker switch  or  during the play function of the CD orturn the menu control button
2
, in order to select the previous and/or the nexttitle.
›
Press the button  or  for fast replay of the track (reverse or forward). Theplay function is continued after releasing the button.
Function SCAN
›
Briefly press the menu control button
2
, in order to scroll through the CD. Thefirst 10 seconds of each title are played.
›
In order to call up the original replayed title, press the station key CANCEL
12
.
›
End the automatic finding by pressing the button OK
12
. The already replayedtitle remains selected.
›
If you wish to select another title, press the button SKIP
12
.
End the play function of the CD
›
In order to end the play function of the CD and to activate the radio, press thebutton RADIO.
Ejecting CD
›
Press the button
11
, the Cd is ejected.
Display of additional information (MP3 data)Press the button INFO, the additional information for the current title is displayedon the display.
In the display, you can select the display of additional information via the MP3 da-ta using the station keys 1 - 6.
Note
■If the ejected CD is not removed, it is drawn in again for safety reasons.■If the radio is functioning in the TP mode before changing to the CD mode, theplay function of the CD is interrupted during the traffic reports and the unitswitches over to the radio mode. After the traffic reports have ended, the unitswitches back once again to the CD mode.
Ð
Selective functions in CD mode
During the CD play function the following functions are displayed on the display:
RPTSelection of the mode for repeating the title.
›OFF - Play function in continuous order;›TRACK - repeated play function of the selected title;›FOLDER - is a CD inserted with MP3 data, the titles are repeated from the fold-er, which was active when starting the repeat mode.
FLD DOWN (PREV PL - for the play function of the play list)Scroll downwards in the folders.
FLD UP (NEXT PL - for the play function of the play list)Scroll upwards in the folders.
PLAYLISTPlay function of the playlist (folder of selected titles from individual folders, whichis stored on the CD).
BROWSEScroll through the entire folder structure.
This function is only active for external audio sources, which are connected viathe MDI input.
›CANCEL - ends function BROWSE;›TOP - returns to the root folder;›UP - returns to a level higher;›PLAY ALL - replays all titles from the selected folder;
6CD player

›OPEN1) - opens the list of the sub-folders of the selected folder;›PLAY2) - starts the play function of the selected title.
MIXPlay function of titles in random order.
Note
Confirm the functions OPEN and PLAY using the function key or by pressing themenu control button 2.
Ð
General information for MP3 operation
Requirements for the MP3 data and data carrier›CD-ROM, CD-R, CD-RW with a capacity of 650 MB and 700 MB.›The CDs must correspond to the ISO 9660 Level 2 standard as well as the Jolietdata system (single and multi-session).›Data names must be no longer than 64 characters.›The list structure is restricted to a depth of 8 list levels.›The name of the artist, the album and the title of the reproduced MP3 data canbe shown as ID3 tag, providing this information is available. The list and dataname will be displayed if there is no ID3 tag.›Playlists are not supported.›WMA data (Windows Media Audio) can also be played even if the copyright isadditionally protected by the DRM procedure (Digital Rights Management). SuchWMA data is not supported by the unit.
Bit rate (data flow per time unit)›The system supports MP3 data with bit rates of 32 to 320 KB/s as well as MP3data with variable bit rates.›The indicated playing time data with variable bit rates is not reliable.
Ð
Information on how to use a CD
CD to jumpUneven road surfaces and strong vibrations may cause the CD to jump.
Formation of condensationWhen it is cold and after rain showers, moisture can deposit in the CD drive (con-densation). This can effect the CD jump or impair the play function. In such caseswait until the moisture has dissipated.
Notes for the care of the CDsIf a CD is soiled, please never clean the CD in the direction of a circle but ratherfrom inside to outside with a soft lint-free cloth. In case of severe layers of dirt werecommend to clean the CD with a commercially available CD cleaner. Also in thiscase do not clean the CD in the direction of a circle but rather from inside to out-side and then let it dry off.
Overheating protectionIf the temperature in the unit exceeds 85°C, the play function of the CD is endedfor safety reasons.
CAUTION
■Never use liquids such as gasoline, paint thinner or disk cleaner, otherwise thesurface of the CD could get damaged!■
Never expose the CD to direct sun rays!
■
Please never write or affix the CD!
Note
Dirt or damage of a CD can lead to difficulties when “reading” the information.The difficulty in reading the error depends on the dirt or on the severity of themechanical damage. Severe scratches cause reading errors which can make theCD jump or “get stuck”. All CDs must be treated carefully and always be stored ina protective case.
Ð
External sources
Input AUX
›
The input for external audio sources AUX is located under the armrest of thefront seats.
›
Activate the AUX input by pressing the button MEDIA and by subsequentlypressing the function key AUX.
1)
Valid for a folder structure with sub-folders.
2)
Valid for a folder structure without sub-folders.
7CD player

›External audio sources, which are connected to the AUX input, cannot beoperated via the radio.
Input MDI - Multimedia socket
›
The input for the external audio sources MDI is located under the armrest ofthe front seats, in the storage compartment of the front passenger side or in astorage compartment of the centre console (according to vehicle model).
›
Activate the MDI input by pressing the button MEDIA and by subsequentlypressing the function key MDI.
›
Audio data in MP3, WMA, OGG Vorbis and AAC format from the external datastickers, connected to the MDI input, can be played via the radio.
›
External audio sources, which are connected to the MDI input, can be operatedvia the radio.
It is possible to play back external audio sources via the loudspeakers of the radioin the vehicle.
You can select another audio source on the radio at any time. As long as the ex-ternal audio source is not switched off, it remains always active in the back-ground.
Please refer to the Owner's manual of the respective manufacturer for the opera-tion of the external audio source.
If a MEDIA-IN socket is additionally installed, the button MDI is displayed insteadof the function key AUX in the Audio menu. Please note that an audio source con-nected to the AUX-IN socket can only be replayed, if there is currently no datacarrier connected to the MDI input.
Use the standard jack plug 3.5 mm for the AUX socket. If the external audiosource does not have this jack plug, you must use an adapter.
Adjust the play function volume of the external audio sourceThe play function volume of the external audio source can be changed via the vol-ume control on the radio.
Depending on the connected audio source, the output volume on the external au-dio source can be changed.
You can also change the input sensitivity of the external audio source, in order forthe play function volume of the external audio source to adapt to other audiosources or to avoid distortions of the play function volume.
AdapterA special adapter is required to connect audio sources via the input MDI.
We recommend that you purchase an adapter for connecting the USB devices, thedevices with Mini USB output or an iPod, at an authorised ŠKODA Service Partner.
Conditions for proper connection›Only USB devices with the specification 2.0 can be connected.›The version of the file allocation table FAT (File Allocation Table) of the connec-ted device must be FAT16 ( <2 GB) or FAT32 (> 2 GB).›In order to replay from a unit with a hard disk (HDD) which includes a large datavolume, it can lead to a time delay when reading in the overview of the musicdata.›In order to replay from a unit, which includes a complicated folder structure, itcan lead to a time delay when reading in the overview of the music data.›The folder structure in the connected unit must not exceed a depth of 8 levels.One folder must not contain more than 1000 data.›A USB extension cable or USB distributor (HUB) must not be used to connectthe unit.
WARNING■On no account place an external audio source on the dash panel. You couldmake sudden manoeuvres in the passenger compartment and injure the occu-pants.
■
On no account place an external audio source close to the airbags. You couldbe thrown back in the passenger compartment by the airbags being deployedand injure the occupants.
■
You must not hold the external audio source in the hand or on the kneeswhile driving. You could make sudden manoeuvres in the passenger compart-ment and injure the occupants.
■
Always guide the connection cable of the external audio source in such away that is does not restrict you when driving.
CAUTION
The AUX input must only be used for audio sources!
Note
■The external audio source, which is connected via AUX, can only be used ifno unit is connected via MDI at the same time.■
If an external audio source is connected via AUX, which is equipped with anadapter for external power supply, it can occur that the audio signal is interrup-ted. This depends on the quality of the adapter which is used.
8CD player

■The loudspeakers in the vehicle are matched to a power output of the radio of
4x20 W.■
For the equipment sound system, the loudspeakers are matched to a power
output of the amplifier of 4x40 W + 6x20 W.
Ð
9CD player

10CD player

11CD player