infotainment SKODA SUPERB 2016 3.G / (B8/3V) Brief Instructions

Lights and visibility›Operate light function
Use headlights- Turn switch
Switching off lights (except daytime running lights)
Automatically switch lights on/off
Switch on parking lights
Switching on the low beam
Operate fog lights / rear fog lamp - pull switch Switching on the front fog light
Switching on the rear fog light
Headlight range control
On vehicles with Xenon headlights , headlight range control takes
place automatically.
On vehicles with Halogen headlights , headlight rang control takes
place in the Infotainment menu 

→ 
→
Lights
.
› Main beam
Switch on main beam (spring-tensioned position)
Switch off main beam / headlight flasher on (spring-tensioned
position)
 ›
Turning signal system
Switch on the right turn signal
Switch on the left turn signal
4

Air conditioning system›Climatronic
Individual functions can be set or switched on by turning the control
dial or by pressing the appropriate button. If the function is switched
on, a warning light lights up within or below the button.
Adjust the temperature for the left side
Adjust the blower speed
Adjust the temperature for the right side
Display the temperature setting for the left side
Display the temperature setting for the right side
Depending on equipment fitted:
 Auxiliary heating
 Heating of the passenger compartment using the residual heat
of the engine (after switching off the ignition)
Depending on equipment fitted:
 Seat heating and ventilation of the left front seat
 Seat heater on the front left seat
Depending on equipment fitted:
 Seat heating and ventilation of the right front seat
 Seat heating for the front right seat
Air flow to the windows
ABCDEFGHAir flow to the upper body
Air flow in the footwell Recirculated air mode Ventilation/defrosting of the windscreen
Heated rear window
Heated windscreen
Adjust Climatronic in Infotainment
Synchronise the temperature inside the entire vehicle according
to the temperature setting on the driver's side
Automatic mode
Cooling system
6

Park Assist systems›Parking aid
The system draws attention to obstacles in the vicinity of the vehicle
via audible signals and coloured labels in the Infotainment screen.
An obstacle at a distance of less than 30 cm
There is an obstacle in the road
A
(the distance to the obstacle
is greater than 30 cm)
An obstacle is located outside of the road
A
(the distance to the
obstacle is greater than 30 cm)
For vehicles only with sensors built into the rear bumper, the system
activation takes place by engaging reverse gear.
For vehicles with sensors built into the front bumper, system activa-
tion by engaging reverse gear, by pressing the button 
in the front
centre console or automatically when the vehicle approaches an ob-
stacle at a speed below 10 km/h, when driving forwards.
› Reversing camera
For cars with a reversing camera, the area behind the vehicle and the
following orientation lines are displayed in the Infotainment screen
when reversing.
Distance about 40 cm (safety distance limit)
Distance about 1 m
Distance about 2 m
The lane lines terminate approximately 3 m behind the vehicle
System activation takes place by engaging reverse gear or by pressing
the button 
in the front centre console.
ABCD13

›Front Assist
The Front Assist system shows a warning of a collision risk with a vehi-
cle or with another obstacle located in front of you, in the display of
the instrument cluster.
In a speed range of 5 km/h to 30 km/h the Front Assist system at- tempts to avoid the collision or lessen its consequences by braking au-
tomatically in the event of an impending crash.
System displays The safe distance to the vehicle in front is below the minimumAutomatic braking in the event of a collision risk (depending on the
type of display, the symbol is displayed in red or white)
Deactivation/Activation can take place in one of the following ways.
› In MAXI DOT display in the
Wizard
menu item.
› In Infotainment in the
 menu
→ 
→
Driver assistance
.
Front Assist is automatically activated each time the ignition is switch-
ed on.
› Lane Assist
The Lane Assist system helps to keep the vehicle in lane.
The system detects the boundary lines of the lane using a sensor.
When the vehicle approaches a detected line between lanes, the sys-
tem makes a light movement of the steering wheel in the opposite di-
rection to the boundary line. This corrective steering intervention can
be manually overridden at any time.
System displays (Display example in colour display)
The system is active, but not ready to intervene.
The system is active and ready to intervene.
The system intervenes when approaching the right-hand boundary
lane.
Adaptive tracking takes place.
Deactivation/Activation can take place in one of the following ways.
› In MAXI DOT display in the
Wizard
menu item.
› In Infotainment in the
 menu
→ 
→
Driver assistance
.
16

Telephone›Connection conditionsThe ignition is switched on.
The Bluetooth ®
function of Infotainment and the telephone is
switched on.
The visibility of Infotainment and the telephone is switched on.
The phone is in the passenger compartment.
The telephone is compatible with Infotainment.
A list of supported phones can be found on the Internet site
http://go.skoda.eu/compatibility , see QR Code.›Connection›
Press the
PHONE button , then tap on the function surface
Search forphone
- searching for available phones starts.
›
Tap on the function surface
Results
Select the button and the desired
phone.
›
Confirm the coupling - the phone connects to Infotainment and the
main menu phone is displayed.
19