turn signal SKODA YETI 2010 1.G / 5L Bolero Car Radio Manual

Basic setting
7
- Button for calling up the automatic
play or for the radio text to fade
in .
- activates manual station finding.
The process of searching for and storing the radio stationsManual search – Turn the Set button in the
RADIO
main Setup or press on the func-
tion key . The scale of the selected frequency range is inserted in the frequency band in the lower part of the display.
– Briefly press the set button to terminate the manual frequency selec-
tion and to display once again the function keys.
Storing a radio station on a displayed station key – Continue to press one of the six station keys to displayed in
the
RADIO
main Setup until a signal tone sounds. The currently heard
radio station is then stored on this station key.
Deleting a radio station from the memory list –In the
RADIO
main Setup, press the function key to open the
memory list.
– Press the function key behind the station you wish to delete. – Confirm the following safety interrogation by pressing the function
key to finally remove the st
ation from the memory list.
If the currently heard radio station is already stored in the memory list, the memory space number is displayed behind the
description of the frequency range (
FM
or
AM
).
Use the
Setup Radio
main Setup, to determine which of the six station keys are to
be displayed in the main Setup
RADIO
.
Function SCANThe stations of a waveband
can be played briefly one after the other (for
ten seconds). – Press the set button , the radio searches automatically all available
stations of the current waveband.
– Alternatively, press the function key and press in the
opening pop-up window.
– During the current automatic play the function key will change from
to .
– Press the set button or function key again to end the auto-
matic play of the currently heard radio station.
RDS functionsSwitching radio text on and off –In the
RADIO
main Setup, press on the function key and on in the opening pop-up window. Instead of the six station
keys, the window for displaying the radio text is now opened in the lower half of the display.
– The window for displaying the radio text must fade out again to enable
the station keys to be displayed ag
ain. Briefly press on the display
window of the radio text.
– Alternatively, press the function key and the function key
shown as highlighted in
the opening pop-up window.
RDS (“
Radio
Data
System”) serves to transmit program identification and additional
services therefore also enabling automatic tracking of stations. In the event of sufficiently satisfactory reception, the suitable RDS radio stations will display the station name instead of the station frequency.
Extras
Scan
Radio TextMan.
A2
Man.
1 ...
6 ...
Memory
Delete
Delete
A2
Extras
Scan
Extras
 Scan
A2
Scan
Extras
Radio Text
Extras
Radio Text
s3p4.a.book Page 7 Friday, March 13, 2009 3:04 PM