ECO mode SKODA YETI 2010 1.G / 5L Swing Car Radio Manual

General information
2
General informationEquipment overview
Control button
 Switching radio on and off
 Volume control (rotate)
Menu control button
 Call up the menu settings of the parameter for radio or CD player
 Activating the function Scan
Button to activate the play function of audio sources
Button to activate the radio mode
Buttons
 fast station finding in radio mode
 Select the track in the CD mode, fast forward/backward search in the CD mode
Button
 Display of radio text information
 Display of additional information of MP3-CDs
Button for adjusting the sound
Button automatically stores the station
Button to activate the reception of traffic reports
CD case
CD - eject button
Station keys
 store and select the RDS station
 CD selection*
 Enter code
Explanation of symbols
 items of equipment which are marked in such a way are only installed as standard
on certain models or are supplied as special equipment. End of a section.
 The section is continued on the next page.
Note
This Owner's Manual describes the range of functions at the time of going to press. The
illustrations can differ in minor details from the version of your unit.Important informationWarrantyThe equipment warranty terms and cond itions also apply for new vehicles.
After the expiration of the warranty, a piece of equipment in need of repair will be
replaced with a reconditioned, original item with spare part warranty. It is, however, a
precondition that the housing has not be en damaged and no unauthorised attempts
have been made to carry out repairs.
Note
Damage within the meaning of the warranty must not be the result of improper
handling of the system or from unprofessional repair attempts. It is also essential that
there is no external damage.Device operationThe unit should only be used, if the traffic situation permits it.
The volume settings must be selected in such a way that audible signals from the
outside, e.g. a Martins horn from utility vehicles (police cars, ambulances and fire
brigade), can be heard at all times.
A1A2A3
MEDIA
A4
RADIO
A5


A6
INFO
A7

A8
AS
A9
TP
A10A11A12s214.14.book Page 2 Thursday, January 28, 2010 1:29 PM

General information5
BT-AUDIO*
Enables a wireless transfer of MP3 data from the telephone preinstallation.Radio modeWaveband switch-over– Press the button for a long period of time.
Your radio is equipped with FM and AM wavebands. They are divided in 6 memory
levels, i.e. 3 levels for the FM waveband and 3 levels for the AM waveband. There are
each 6 memory spaces available on these levels.
Activation of the FM waveband
The FM waveband is activated when pressing the station key FM. By briefly pressing
the button , you can select between th e memory levels FM1, FM2 and FM3.
Activation of the AM waveband
The AM waveband is activated wh en pressing the station key AM . By briefly
pressing the button , you can select be tween the memory levels AM1, AM2 and
AM3.The process of searching for and storing the radio stationsManual search– Search the frequency of the desired ra dio station by turning the menu control
button .Store station– After selecting the radio station, hold the station key , on which it should be stored until it briefly switches to mute and a brief signal sounds.
Automatic station finding with storing the radio stations– Press the button . An automatic station finding is started during which the 6
stations with the strongest signal in the memory level FMAS and/or AMAS are
stored.
When storing the radio stations on the station keys is finished, you can call up the
desired radio station by pressing a station key .
Note
The stored radio stations of the current wa veband are updated and stored once again
in the memory level FMAS and/or AMAS by repetitively pressing the button .Function SCANThe stations of a waveband can be played br iefly one after the other (for ten seconds).
– Press the menu control button , the ra dio searches automatically all available
stations of the current waveband.
– In order to call up the original radio station, press the station key CANCEL.
– End the automatic finding by pressing the button OK. The current radio station
remains selected.
– If you wish to select other radio stations, press the button SKIP.RDS functionsCertain radio stations transmit additional text information - designated as radio text.
– The information of the radio text is displayed by pressing the button .
Note

The text information must not be available to all radio stations.

Depending upon the quality of the received signal, the radio needs a specific time,
in order to correctly read all the illustrated characters.
RADIO
A12
RADIO
A12
RADIO
A2
A12
AS
A12
A12
AS
A2
A12
A12
A12
INFO
s214.14.book Page 5 Thursday, January 28, 2010 1:29 PM

CD player7
CD playerUsing the systemInserting the CD– Press the button , in order to select the audio source: CD (internal CD
drive), CDC (external CD changer), AUX (external input) and BT-AUDIO (wireless
transfer of MP3 data from the telephone preinstallation).
– Carefully insert a CD into the CD case until it is automatically drawn in. The play function begins automatically.Operating the CD playerSelect track– Briefly press the rocker switch or duri ng the play function of the CD or turn
the menu control button , in order to select the previous and/or the next title.
– Press the button or longer for fast replay of the track (reverse or forward).
The play function is continued after releasing the button.Function SCAN– Briefly press the menu control button , in order to scroll through the CD. The first 10 seconds of each title are played.
– In order to call up the original repl ayed title, press the station key CANCEL.
– End the automatic finding by pressing the button OK. The already replayed title
remains selected.
– If you wish to select another title, press the button SKIP.End the play function of the CD– In order to end the play function of the CD and to activate the radio, press the
button .
Ejecting CD– Press the button , the Cd is ejected.
Display of additional information (MP3 data)
Press the button , the additional information for the current title is displayed on
the display.
In the display, you can select the display of additional information via the MP3 data
using the station keys - .
Note

If the ejected CD is not removed, it is drawn in again for safety reasons.

If the radio is functioning in the TP mode before changing to the CD mode, the play
function of the CD is interrupted during the traffic reports and the unit switches over
to the radio mode. After the traffic reports have ended, the unit switches back once
again to the CD mode.
Selective functions in CD modeDuring the CD play function the following functions are displayed on the display:
RPT
Selection of the mode for repeating the title.
OFF - Play function in continuous order;

TRACK - repeated play function of the selected title;

FOLDER - is a CD inserted with MP3 data, the titles are repeated from the folder,
which was active when starting the repeat mode.
FLD DOWN (PREV PL - for the play function of the play list)
Scroll downwards in the folders.
FLD UP (NEXT PL - for the play function of the play list)
Scroll upwards in the folders.
MEDIA
A10


A2


A2
A12
A12A12
RADIO
A11
INFO
1
6
s214.14.book Page 7 Thursday, January 28, 2010 1:29 PM