lock SKODA YETI 2010 1.G / 5L Swing Car Radio Manual
[x] Cancel search | Manufacturer: SKODA, Model Year: 2010, Model line: YETI, Model: SKODA YETI 2010 1.G / 5LPages: 14, PDF Size: 0.52 MB
Page 5 of 14

General information3
WARNING
Please concentrate fully at all times on yo ur driving! As the driver you are fully
responsible for road safety. Only use the functions of the radio in such a way
that you are always in full control of your vehicle in all traffic situations!Using the displayCarefully handle the display because dents and scratches can occur through pressure
of the finger or contact with sharp objects.
The display can be cleaned with a soft clot h and finger marks can be wiped away with
pure alcohol.
Note
Do not use solvent such as turpentine or petrol as they will corrode the display
surface.Anti-theft protectionAnti-theft codingYour radio is equipped with a convenience coding. If the radio is being operated for the
first time, the safety code is not only st ored in the radio but also in the vehicle.
After disconnecting and reconnecting the battery , first of all switch on the ignition and
then the radio.
If you wish to install the radio in another ve hicle, the safety code must be entered. In
this case, please do not hesi tate to contact an authorised Škoda Service Partner or a
Škoda importer.
As the unit only functions after entering the sa fety code, this practically excludes its use
after a theft - a contribution to increased anti-theft safety.
Note
The code is stored in the instrument cluster. This ensures that it is automatically
decoded (convenience coding). Manual inpu t of the code is normally not necessary.Enter code– Switch on the radio if the ignition is on.
– Enter the safety code using the station keys - .
– Confirm the safety code by pressing the station key .
If you have confirmed a wrongly entered code, you can repeat once again the entire
process.
If the code number is entered incorrectly for the second time, the unit will be blocked
for approx. one hour. It is possible to enter again the safety code after one hour has
expired, when the unit and the ig nition have been switched on.
The cycle - two attempts, blocked for an hour - will continue to apply.Basic settingSwitching the unit on and off– The system is switched on or off by briefly pressing the control button .
If the key is pulled out of the ignition lock while the unit is switched on, the unit will
switch off automatically. Yo u can switch on the unit agai n by pressing the control
button . If the ignition is switched off, th e unit (discharge protection of the vehicle
battery) switches off automati cally after approx. one hour.
If you have switched off the radio by withdr awing the ignition key, the radio switches
on again once the ignition is on.Tone settings– Press the button and then the station key and select the desired parameter.
1
4
6
A1
A1
A12
s214.14.book Page 3 Thursday, January 28, 2010 1:29 PM