lock SMART FORTWO COUPE 2008 Owner's Guide

Lighting>> Controls.
105
>Switching on: Push the combination switch
in the direction of arrow
1 or
2.
The corresponding turn signals flash.
The corresponding turn signal indicator
lampL orK in the instrument
cluster flashes.
The combination switch resets automati

cally after major steering wheel movement.
i
To signal minor directional changes such
as changing lanes, push the combination
switch only to the point of resistance and
release. The corresponding turn signals will
flash three times.
Coming home functionVehicles without rain
light sensor:
The interior lamps come on and then go out
again after 12 seconds every time when you
lock or unlock the vehicle.
Vehicles with rain
light sensor*:
In addition to the interior lamps, the exterior
lamps come on and then go out again after
12 seconds depending on the brightness of
the ambient light when you lock or unlock the
vehicle.
When leaving the vehicle
>Remove the key from the starter switch.
>Exit the vehicle.
>Press button
ª
on the key.
The vehicle is locked.
The interior and exterior
1 lamps come on
and then go out again after 12 seconds.
When returning to the vehicle
>Press button
©
on the key either once or
twice.The vehicle is either selectively or globally
unlocked.
The interior and exterior
1 lamps come on
and then go out again after 12 seconds.
Front fog lamps
1 Vehicles with rain
light sensor
G
Warning!
Vehicles with rain
light sensor*:
In low ambient lighting or foggy condi

tions, only switch from positionU
toB with the vehicle at a standstill in
a safe location. Switching fromU
toB will briefly switch off the head

lamps. Doing so while driving in low ambi

ent lighting conditions may result in an
accident.

Lighting>> Controls.
107 Hazard warning flasher
The hazard warning flasher can be switched
on at all times, even with the key removed from
the starter switch.1
Hazard warning flasher switch
>Switching on: Press hazard warning flasher
switch
1.
All turn signal lamps are flashing.
>Switching off: Press hazard warning flasher
switch1 once more.
Interior lightingThe interior lamp comes on for a period of
time when you open the doors, or lock or
unlock the vehicle with the key.
It goes out
• immediately after switching off the ignition
with all doors closed,
• after 30 seconds if the doors are not
opened,
• after 15 seconds if all doors are closed,
• after 10 minutes if at least one door is open.The rocker switch can be set to three differ

ent positions.
1
Interior lamp
2
Switching on the automatic control
3
Off
4
Continuous operation P54.25
5341
31
P82.20
2954
31

Windshield wipers
>> Controls.
109 Switching windshield wipers on
and off
Wiper switch0
Windshield wipers off
1
Intermittent wiping
2
Slow continuous wiping
3
Fast continuous wiping
>Make sure that the key in the starter switch
is turned to position1.>Switching on: Turn the wiper switch to
position
2 or
3 depending on the
intensity of the rain.
!
Do not operate the windshield wipers when
the windshield is dry. Dust that accumulates
on a windshield might scratch the glass and/or
damage the wiper blades when wiping occurs
on a dry windshield. If it is necessary to oper

ate the windshield wipers in dry weather con

ditions, always operate the windshield wipers
with windshield washer fluid (

page 110).
!
If anything blocks the windshield wipers
(leaves, snow, etc.), switch them off immedi

ately.
• For safety reasons, stop the vehicle in a
safe location and remove the key from the
starter switch before attempting to remove
any blockage.
• Remove blockage.
• Turn the windshield wipers on again.
>Switching off: Turn the wiper switch to
position
0.
Intermittent wipingOnly switch on intermittent wiping under wet
weather conditions or in the presence of
precipitation.
Vehicles with rain
light sensor*:
When you select intermittent wiping, the
sensor is activated. The sensor automatically
sets a suitable wiping interval depending on
the wetness of the sensor surface.!
Vehicles with rain
light sensor*:
Do not leave windshield wipers in intermittent
setting when the vehicle is taken to an auto

matic car wash or during windshield cleaning.
Windshield wipers will operate in the pres

ence of water sprayed on the windshield, and
windshield wipers may be damaged as a result. P54.25
5347
31

Soft top system (cabrio only)
112
>> Controls. The soft top system of the smart cabrio
consists of a:
• Retractable soft top
• Rear soft top
• Side rails
You can remove the side rails over the doors
when you open the retractable soft top and
open the rear soft top.
i
Opening the rear soft top is possible after
the retractable soft top has been opened
completely (

page 115).
Notes on the soft top system!
When transporting long objects inside the
vehicle, make sure that they do not press
against the retractable soft top when it is
closed.
When carrying objects that protrude from the
rear of the vehicle, make sure that they are
not resting on the retaining clips.
When loading, make sure that no sharp objects
come into contact with the soft top or the rear
window.
Do not place any evenly distributed loads with
a weight of more than 165 lbs (75 kg) on the
rear soft top when folded down.
Make sure that the high mounted brake lamp is
not concealed.
!
Do not block the soft top system's locking
apertures.
Only place the side rails in the designated
storage space of the tailgate.
!
Do not sit on the folded
down rear soft
top.
Do not fold down the rear soft top at temper

atures below 14°F (
10°C).
Do not place any pointed, sharp
edged, hot
(above 176°F (80°C)), incandescent or burn

ing objects on the soft top's lining.
Do not apply wax to the soft top fabric and
select only wax
free washing programs when
using an automatic car wash.
Only drive with the retaining clips closed, as
exhaust fumes could otherwise reach the
vehicle’s interior.
!
Please keep in mind that weather condi

tions can sometimes change rapidly. Make
sure to close the retractable soft top and the
rear soft top when leaving the vehicle. If water
enters the vehicle interior, vehicle electron

ics could be damaged which is not covered by
the smart Limited Warranty.

Soft top system (cabrio only)
>> Controls.
113 Opening and closing the retract

able soft top
You can open and close the retractable soft
top when the vehicle is either stationary or in
motion.
!
To avoid damaging the seals, do not trans

port any objects with sharp edges which can
stick out of the retractable soft top.
Do not open the retractable soft top if there is
snow or ice on the roof, as this could result in
malfunctions.
If you cannot open or close the retractable
soft top due to a malfunction contact Roadside
Assistance or an authorized smart center.
G
Warning!
Never operate the retractable soft top if
there is the possibility of anyone being
harmed by the opening or closing proce

dure.
G
Warning!
The retractable soft top is made out of
fabric. In the event of an accident, the
fabric may tear. This may result in an
opening in the roof.
In a vehicle rollover, occupants not
wearing their seat belts or not wearing
them properly may be thrown out of the
opening. Such an opening also presents a
potential for injury for occupants wear

ing their seat belts properly as entire
body parts or portions of them may pro

trude from the passenger compartment.
G
Warning!
When leaving the vehicle, always remove
the key from the starter switch, take it
with you, and lock the vehicle. Do not
leave children unattended in the vehicle,
or with access to an unlocked vehicle.
A child’s unsupervised access to a
vehicle could result in an accident and/or
serious personal injury.

Soft top system (cabrio only)
114
>> Controls. Opening from outside
You can open the retractable soft top com

pletely with the key.
1
ª
Locking button
2
»
Opening the retractable soft top
3
 Panic button
4
ª
Unlocking button
>Press button
»
on the key for approxi

mately two seconds.
The retractable soft top opens completely.Opening from the inside
Retractable soft top switch
1
Closing
2
Opening
>Make sure that the key in the starter switch
is turned to position1.
>Press symbolÖ on the retractable soft
top switch until the desired position is
reached or the retractable soft top is
opened completely.
or>Press symbolÖ on the retractable soft
top switch briefly.
The retractable soft top opens completely.
i
Pressing symbolÖ or± on the
retractable soft top switch while opening the
retractable soft top will interrupt the opening
procedure.
Closing
For safety reasons, you can only close the
retractable soft top using the retractable soft
top switch inside the vehicle.
>Make sure that the key in the starter switch
is turned to position1.
>Press symbol± on the retractable soft
top switch until the retractable soft top is
closed.
i
To avoid draining the battery, leave the
engine running when opening and closing the
retractable soft top. P80.35
2313
31
P54.25
6093
31

Side windows
120
>> Controls.
Opening and closing the side
windows Opening and closing the side windows
manually
Crank for side window on driver’s door1
Crank
Side window on the driver’s door
> Opening: Turn crank
1 counterclockwise.
>Closing: Turn crank
1 clockwise.Side window on the passenger door
> Opening: Turn crank
1 clockwise.
>Closing: Turn crank
1 counterclockwise.
Opening and closing the power windows
1
P67.30
2233
31
1 Model passion only.G
Warning!
Do not keep any part of your body up
against the side window pane when open

ing a window. The downward motion of the
pane may pull that part of your body down
between the window pane and the door
frame and trap it there. If there is a risk
of entrapment, release the switch and
pull up the top of the switch to close the
window.
G
Warning!
When closing the windows, make sure that
there is no danger of anyone being
harmed by the closing procedure.
The closing of the side windows can be
immediately halted by releasing the
switch.
When leaving the vehicle, always remove
the key from the starter switch, take it
with you, and lock the vehicle. Do not
leave children unattended in the vehicle,
or with access to an unlocked vehicle. A
child’s unsupervised access to a vehicle
could result in an accident and/or seri

ous personal injury.

Driving and parking
>> Controls.
123
Starting the engine
For information on turning off the engine, see
(
page 127).
!
Shift the transmission into park positionP
or reverse gearR only when the vehicle is
stopped in order to avoid damaging the trans

mission.
>Make sure the gear selector lever is set to
park positionP.
The transmission position indicator should
be on
.
>Do not depress the accelerator.
>Turn the key in the starter switch to
position2 (

page 91) and release it again
immediately.
The engine starts automatically ("touch

start" function).
Driving >Depress the brake pedal.
>Press the release button (

page 122) to
disengage the gear selector lever lock.
>Move the gear selector lever to drive
positionD.
appears in the transmission position
indicator.
>Release the brake pedal.
>Carefully depress the accelerator.
!
Do not run cold engine at high engine
speeds. Running a cold engine at high engine
speeds may shorten the service life of the
engine.
!
Simultaneously depressing the accelera

tor and applying the brakes reduces engine
performance and causes premature brake and
drivetrain wear.
G
Warning!
On slippery road surfaces, never down

shift in order to obtain braking action.
This could result in drive wheel slip and
reduced vehicle control. Your vehicle’s
ABS will not prevent this type of loss of
control.
G
Warning!
It is dangerous to shift the transmission
out of park positionP or neutral
positionN if the engine speed is higher
than idle speed. If your foot is not firmly
on the brake pedal, the vehicle could
accelerate quickly forward or in reverse.
You could lose control of the vehicle and
hit someone or something. Only shift into
gear when the engine is idling normally
and when your right foot is firmly on the
brake pedal.

Driving and parking
124
>> Controls.
Reversing the vehicle!
Shift the transmission into reverse gearR
only when the vehicle is stopped in order to
avoid damaging the transmission.
You can drive in reverse gear at a speed of up
to9mph (15km/h).
>Depress the brake pedal.
>Press the release button (

page 122) to
disengage the gear selector lever lock.>Move the gear selector lever to reverse
gearR.
appears in the transmission position
indicator.
>Release the brake pedal.
>Carefully depress the accelerator.
ParkingG
Warning!
Do not park this vehicle in areas where
combustible materials such as grass, hay
or leaves can come into contact with the
hot exhaust system, as these materials
could be ignited and cause a vehicle fire.
To reduce the risk of personal injury or
damage to the drivetrain as a result of
vehicle movement, before turning off the
engine and leaving the vehicle always:
• Keep right foot on the brake pedal.
• Pull the parking brake lever up as many
notches as possible.
• Move the gear selector lever to park
positionP.
• Slowly release the brake pedal.
• When parked on an incline, always turn
the front wheels towards the road curb.
• Turn the key in the starter switch to
position0 and remove.
Take the key with you and lock the vehicle
when leaving.G
Warning!
With the engine not running, there is no
power assistance for the brake servo and
the steering system. In this case, it is
important to keep in mind that a consid

erably higher degree of effort is neces

sary to brake and steer the vehicle.

Driving and parking
>> Controls.
125
>Properly stop and park the vehicle.
>Depress the brake pedal.
>Pull up the parking brake lever as many
notches as possible (

page 125).
When the ignition is switched on or the
engine is running, the brake warning
lamp; (USA only) or3 (Canada only)
in the instrument cluster comes on.
>Release the brake pedal.
Parking brake
The parking brake serves to secure the vehi

cle against rolling away when it is stationary
or parked.
1
Parking brake lever
2
Release button
>Applying: Pull up parking brake lever
1 as
many notches as possible.
When the ignition is switched on or the
engine is running, the brake warning
lamp; (USA only) or3 (Canada only)
in the instrument cluster comes on.
> Releasing: Depress the brake pedal.
>Pull up slightly on parking brake lever1
and press release button
2.>Push parking brake lever
1 down as far as
it will go.
When the ignition is switched on or the
engine is running, the brake warning
lamp; (USA only) or3 (Canada only)
in the instrument cluster goes out.
G
Warning!
Engaging the parking brake while the
vehicle is in motion can cause the rear
wheels to lock up. You could lose control
of the vehicle and cause an accident. In
addition, the vehicle’s brake lights do not
light up when the parking brake is
engaged.P42.20
2346
31
G
Warning!
Getting out of your vehicle with the
transmission not fully engaged in park
positionP is dangerous. When the engine
is shut off and the brakes are released,
the vehicle can be moved freely with the
gear selector lever in all positions ex

cept park position P. Also, when parked
on an incline, park positionP alone may
not prevent your vehicle from moving,
possibly hitting people or objects.
Always set the parking brake in addition
to shifting to park positionP.
When parked on an incline, always turn
the front wheels towards the road curb.