battery replacement SMART FORTWO COUPE 2008 Owners Manual
[x] Cancel search | Manufacturer: SMART, Model Year: 2008, Model line: FORTWO COUPE, Model: SMART FORTWO COUPE 2008Pages: 314, PDF Size: 4.41 MB
Page 249 of 314
What to do if ...
248
>> Practical hints. Flashes at double frequency:
• if one of the turn signals is malfunctioning.
>Replace the bulb as soon as possible
(page 254).
or
>Have the turn signal checked at an autho
rized smart center as soon as possible.
EngineThe engine does not start:
>Check if
• the gear selector lever is in park
positionP,
• the brake pedal has been depressed,
• the transmission position indicator is on
or
.
The engine does not start within 4 seconds:
>Wait for a few seconds.
>Repeat the starting procedure.
Remember that extended starting attempts
can drain the vehicle battery.
The engine does not start after several
starting attempts:
>Set the parking brake when leaving the
vehicle.
>Contact Roadside Assistance or an autho
rized smart center.
Loss of keyIf you lose a key, you should do the following:
>Have the key deactivated at an authorized
smart center.
>Report the loss of the key to your car
insurance company immediately.
>If necessary have the mechanical lock
replaced.
Your authorized smart center will be glad to
supply you with a replacement following an
identity check.
Page 254 of 314
Replacing transmitter battery
>> Practical hints.
253 Replacing transmitter battery
Replacement battery: CR 2016 button cell!
Replace the remote control's transmitter
battery every two years at the latest. Other
wise there is a danger of leakage. The remote
control could be damaged.
1
Key housing top half>Insert a suitable object such as a coin into
the slot at the eyelet of the key housing.
>Carefully turn the coin until key housing top
half
1 is unlatched.
>Open key housing top half
1 to the side.
2
Transmitter battery
>Remove transmitter battery
2 from the
board.
!
Check the polarity when inserting the new
transmitter battery. You could otherwise
damage parts of the electrical system. When
inserting the batteries, make sure they are
clean and free of lint.
>Insert the new transmitter battery.
>Press both halves of the key housing
together again.
>Check the operation of the remote control.
P80.35228931