warning lights SMART FORTWO COUPE 2008 Owners Manual

Symbols
>> Introduction.
21
Trademarks:
•Bluetooth
® is a registered trademark of
Bluetooth SIG Inc.
•ESP
® is a registered trademark of
DaimlerChrysler.
The following symbols are found in this
Operator’s Manual:
!
Highlights hazards that may result in
damage to your vehicle.
i
Helpful hints or further information you
may find useful.
*
Optional equipment is identified with
an asterisk. Since standard equip

ment varies between models, the
descriptions and illustrations in this
manual may differ slightly from the
actual equipment of your vehicle.
G
Warning!
Warning notices draw your attention to
hazards that may endanger your health or
life, or the health or life of others.
>
This symbol points to instructions
for you to follow.
>
A number of these symbols
appearing in succession indicates a
multiple
step procedure. (several >)

page
This symbol tells you where you can
find additional information on a top

ic within this Operator’s Manual.

Lighting
102
>> Controls. Parking lamps
You can switch on and off the parking lamps
with exterior lamp switch using the manual
headlamp mode.
>Switching on: Turn the exterior lamp switch
to positionC.
The parking lamps come on.
The following lamps also come on:
• Tail lamps
• License plate lamps
• Side marker lamps
Low beam headlamps
You can switch on and off the low beam
headlamps with exterior lamp switch using the
manual headlamp mode.>Switching on: Turn the exterior lamp switch
to positionB.
The low beam headlamps come on.
The low beam headlamp indicator lamp¡
in the instrument cluster comes on.
The following lamps also come on:
• Tail and parking lamps
• License plate lamps
• Side marker lamps
Automatic headlamp mode
1
The following lamps come on and go out auto

matically depending on the brightness of the
ambient light:
• Low beam headlamps
• Tail and parking lamps
•License plate lamps
• Side marker lamps1 Vehicles with rain
light sensor* only.
G
Warning!
If the exterior lamp switch is set to
positionU, the headlamps will not be
automatically switched on under foggy
conditions.
To minimize risk to you and to others,
activate headlamps by turning exterior
lamp switch to positionB when
driving or when traffic and/or ambient
lighting conditions require you to do so.
In low ambient lighting conditions, only
switch from positionU toB with
the vehicle at a standstill in a safe
location. Switching from positionU
toB will briefly switch off the
headlamps. Doing so while driving in low
ambient lighting conditions may result in
an accident.
The automatic headlamp feature is only
an aid to the driver. The driver is
responsible for the operation of the
vehicle’s lights at all times.

Driving and parking
>> Controls.
125
>Properly stop and park the vehicle.
>Depress the brake pedal.
>Pull up the parking brake lever as many
notches as possible (

page 125).
When the ignition is switched on or the
engine is running, the brake warning
lamp; (USA only) or3 (Canada only)
in the instrument cluster comes on.
>Release the brake pedal.
Parking brake
The parking brake serves to secure the vehi

cle against rolling away when it is stationary
or parked.
1
Parking brake lever
2
Release button
>Applying: Pull up parking brake lever
1 as
many notches as possible.
When the ignition is switched on or the
engine is running, the brake warning
lamp; (USA only) or3 (Canada only)
in the instrument cluster comes on.
> Releasing: Depress the brake pedal.
>Pull up slightly on parking brake lever1
and press release button
2.>Push parking brake lever
1 down as far as
it will go.
When the ignition is switched on or the
engine is running, the brake warning
lamp; (USA only) or3 (Canada only)
in the instrument cluster goes out.
G
Warning!
Engaging the parking brake while the
vehicle is in motion can cause the rear
wheels to lock up. You could lose control
of the vehicle and cause an accident. In
addition, the vehicle’s brake lights do not
light up when the parking brake is
engaged.P42.20
2346
31
G
Warning!
Getting out of your vehicle with the
transmission not fully engaged in park
positionP is dangerous. When the engine
is shut off and the brakes are released,
the vehicle can be moved freely with the
gear selector lever in all positions ex

cept park position P. Also, when parked
on an incline, park positionP alone may
not prevent your vehicle from moving,
possibly hitting people or objects.
Always set the parking brake in addition
to shifting to park positionP.
When parked on an incline, always turn
the front wheels towards the road curb.

Transmission
>> Controls.
131 Driving tips
Accelerator position
Your driving style influences the
transmission’s shifting behavior:
Less throttle, earlier upshifting
More throttle, later upshifting
Kickdown
Use kickdown when you want maximum
acceleration.
>Press the accelerator past the point of
resistance.
Depending on the engine speed the
transmission shifts into a lower gear.
>Ease on the accelerator when you have
reached the desired speed.
The transmission shifts up again.Stopping
When you stop briefly, e.g. at traffic lights:
>Leave the transmission in gear.
>Hold the vehicle with the brake.
When you stop for a longer period with the
engine idling and/or on a hill:
>Set the parking brake.
>Move the gear selector lever to park
positionP.
Working on the vehicle
G
Warning!
When leaving the vehicle, always remove
the key from the starter switch, take it
with you, and lock the vehicle. Do not
leave children unattended in the vehicle,
or with access to an unlocked vehicle.
Children could move the gear selector
lever from park positionP, which could
result in an accident and/or serious
personal injury.
G
Warning!
When working on the vehicle, set the
parking brake and move the gear selec

tor lever to park positionP. Otherwise
the vehicle could roll away.

Replacing bulbs
254
>> Practical hints.
About replacing bulbsSafe vehicle operation depends on proper
exterior lighting and signaling. It is therefore
essential that all bulbs and lamp assemblies
are in good working order at all times.
Correct headlamp adjustment is extremely
important. Have headlamps checked and
readjusted at regular intervals and when a
bulb has been replaced. Contact an autho

rized smart center for headlamp adjustment.
i
If the headlamps or front fog lamps* are
fogged up on the inside as a result of high
humidity, driving the vehicle a distance with
the lights on should clear up the fogging.
G
Warning!
Bulbs and bulb sockets can be very hot.
Allow the lamp to cool down before
changing a bulb. Otherwise you could be
burned if you touch them.
Keep bulbs out of the reach of children.
Halogen lamps contain pressurized gas.
Abulb can explode if you:
• touch or move it when hot
•drop the bulb
• scratch the bulb
Wear eye and hand protection.