heating SSANGYONG KORANDO 2012 User Guide

08-8
3. CAUTIONS
If 100% of anti-freeze is added, the water pump vane can be damaged and thermal conductivity can
be decreased resulting in poor circulation in the cooling system which leads to overheated engine.
Use of non-recommended coolant could cause damage to the cooling system and overheating of the
engine.
Opening the coolant reservoir cap while the engine is running or hot can cause burns by hot steam o
r
water.
To open the coolant reservoir cap, wrap the cap with a wet towel or thick cloth after the engine is
cooled down sufficiently.
If cool water is added to the heated engine, the engine or radiator can be deformed.
The anti-freeze in the coolant can damage the painted surface, so avoid the contact of the coolant to
the painted body.
The anti-freeze and water should be mixed in proper mixture ratio. Never add only water when
adding coolant.
If the anti-freeze content is too low, the coolant can be frozen while the engine can be overheated if
anti-freeze content is too high. -
-
-
-
-
-
-
-

05-4
2. MAJOR CHANGES
SVC class
Previous Current
Rearranged pre-warning indicator which comes on and goes off when turning ignition on.
1) Steering wheel heating indicator added
2) Pre-warning indicator rearranged
3) Winter mode indicator added(DSL only)
STD class
Previous Current
Winter mode indicator added (one green LED)
SVC class
Previous Current
One indicator added since steering wheel heating function is equipped.

05-178010-01
Indicator
(amber)
Winter mode indicator(DSL only) ▶
Steering wheel heating indicator ▶
Indicator
(green)This indicator comes on when the winter mode switch is switched on and
goes off when the switch is off.
This comes on together with the winter mode display on the LCD screen.
(applies to STD class)
This indicator comes on when the steering wheel heating switch
is operated with the ignition switch turned on and the engine running.
(applies to SVC class)

06-38510-01
1. MAJOR CHANGES
Manual air conditioner controller
Previous Current
Driving circuit for the ambient temperature sensor added to the manual air conditioner controller for
ambient temperature display on the instrument cluster
Lower main panel switch
Previous Current
Changed layout due to addition of steering wheel heating switch
Steering wheel heating switch

06-18
Rear door switch (LH) Rear door switch (RH)
3) Rear Door Switches
Warmer switch
Power window switch
The window is up and down while this switch is pressed. Press the switch to heat the seat and press again to stop the seat heating. During
heating, the indicator light on the switch comes on.

06-26
Lower main panel switch
3) Lower Main Panel Switch
Rear fog lamp switch(EU ONLY)
Steering wheel heating switchHLLD(Headlamp Leveling Device)4WD LOCK switch
ESP OFF switch

06-278510-00
4WD LOCK switch
This switch is of push lock type, which
enables to increase/decrease the
torque to the rear wheels in AWD
mode.
Steering wheel heating switch
This switch is of push return type,
which is used to activate or deactivate
the steering wheel heating function.
ESP OFF switch
The ESP OFF switch is of push return
type, which is used to stop or resume
the ESP function.
4WD LOCK switch
This switch is of push lock type, which
enables to increase/decrease the
torque to the rear wheels in AWD
mode.
HLLD
(Headlamp Leveling Device)
The headlamp aiming can be adjusted
by using this dial-type switch.
Rear fog lamp switch
(EU ONLY)
This switch is of push return type,
which sends ON/OFF signal to the
BCM so that the BCM can switch on
the lamps by activating the rear fog
lamp relay.

06-378510-00
Rear seat warmer switch
Front seat warmer switch
5. SEAT WARMER SWITCH
Driver seat warmer switch
Passenger seat warmer switch
Rear LH seat warmer switch Rear RH seat warmer switch
The front and rear seat warmer switches are designed to control (LO or HI) the seat temperature. Press
<009b008f008c004702c8006f00700047004f006f0090008e008f0047009b008c00940097008c00990088009b009c0099008c00500049004700960099004702c8007300760047004f00730096009e0047009b008c00940097008c00990088009b009c009900
8c005000490047009600950047009b008f008c0047009a008c>at warmer switch to heat the seat
<00880095008b0047009a008c0088009b00890088008a009200550047007e008f008c00950047009b008f008c0047009b008c00940097008c00990088009b009c0099008c00470099008c0088008a008f008c009a0047005b0057004700b7005c0b45005300
47009b008f008c0047009b008f008c009900940090009a009b>or integrated in seat connects
and cuts the power to keep the temperature stable. There is no separate seat warmer unit to control the
heating temperature of the seat heated wire.
(STD class)

01-4
2) Steering Wheel Angle Sensor
SWAS: Steering Wheel Angle Sensor
Old New
The sensor has been changed due to newly adopted steering wheel heating system.
The location of sensor connector and the pin arrangement of connector have been changed. 1.
2.
Sensor connector Sensor connector

01-50000-00
3) Steering Wheel Heating System
Steering wheel heating unit
Old New
The steering wheel heated wire and the heating unit are
installed in the steering wheel assembly.Lower main switch cluster
Old
New
The steering wheel heating switch has
been added on the lower main switch
cluster.
Specifications ▶
Description Specification
Power consumption Below 95W
Rated voltage 12V
Operating voltage 9V~16V
Rated current6±2.0A
Steering wheel
heating unit
Steering wheel
heating switch