remote start SSANGYONG MUSSO 1998 Workshop Repair Manual

1F1-6 M162 ENGINE CONTROLS
DIAGNOSIS
SELF DIAGNOSIS SOCKET PIN NUMBERS AND DESCRIPTIONS
1 Ground
2 Ignition 1
3 Battery Power Supply (Fuse NO.17)
4 REKES :PIN 6
5 Engine Speed Signal :MSE PIN 60
6 TCCU(Part-time)
7 STICS(PIN 26)
8-
9-
10 Air Bag(PIN 20)11 Remote Engine Start Unit(PIN 10)
12 -
13 Brake System
(ABS 5.3:PIN 11, ABS/ABD 5.3:PIN 46)
14 MSE 3.62S/3.53S(ECU Data Output:PIN 58)
15 TOD(PIN 20)
1 6 Immobilizer
17 -
1 8 TCU(PIN 23)
19 -
2 0 K-LINE(ECS:PIN 23)

1F2-6 M161 ENGINE CONTROLS
DIAGNOSIS
SELF DIAGNOSIS SOCKET PIN NUMBERS AND DESCRIPTIONS
1 Ground
2 Ignition 1
3 Battery Power Supply (Fuse NO.17)
4 REKES :PIN 6
5 Engine Speed Signal :MSE PIN 60
6 TCCU(Part-time)
7 STICS(PIN 26)
8-
9-
10 Air Bag(PIN 20)
11 Remote Engine Start Unit(PIN 10)12 -
13 Brake System
(ABS 5.3:PIN 11, ABS/ABD 5.3:PIN 46)
14 MSE 3.62S/3.53S(ECU Data Output:PIN 58)
15 TOD(PIN 20)
1 6 Immobilizer
17 -
1 8 TCU(PIN 23)
19 -
2 0 K-LINE(ECS:PIN 23)

9A-10 BODY WIRING SYSTEM
94 Seat Belt Switch (Driver)
95 Seat Belt Switch (Dirver)
96 Parking Brake Switch
97 Rear Cigarette Lighter
9 8 OVPR.................................................................Gasoline E/G
99 LH Side Repeater...............................................Rear Fog Lamp
100 Engine Wiring Connector
101 Engine Joint Connector
102 Engine Joint Connector......................................Gasoline E/G
103 ECS Engine Wiring Connector...........................Diesel E/G & Gasoline E/G with HFM ECU
104 ABD Engine Wiring Connector...........................ABD 5.0
105 ABD Engine Wiring Connector...........................ABD 5.0
105-1ABS Engine Wiring Connector............................ABS 5.0
106 Canister Purge Solenoid Valve...........................Gasoline E/G with MSE ECU
106-1Canister Purge Solenoid Valve...........................E20 & E23 Gasoline E/G with FHM ECU
107 Econo/Standard Solenoid Valve.........................Gasoline E/G with Automatic Transmission
108 CO Potentio Meter..............................................Gasoline E/G with HFM ECU & CO Potentio Meter
109 Front Wiper Motor
11 0 O
2 Sensor...........................................................E20 or E23 Gasoline E/G
111 RH Side Repeater
112 Engine Wiring Connector
113 Vertical Sensor
114 Lateral Sensor
115 Diagnosis
11 6 Joint Box.............................................................Gasoline E/G (E32)
117 Canister Purge Solenoid Valve...........................E32 Gasoline E/G with HFM ECU
118 Led Antenna......................................................Rolling code type Immobilizer
119 E-key Connector................................................Gasoline E/G with Rolling Code Type Immobilizer
120 Receiver Unit......................................................Gasoline E/G with Rolling Code Type Immobilizer
121 Receiver Unit......................................................Gasoline E/G with Rolling Code Type Immobilizer
122 Receiver Antenna..............................................Gasoline E/G with Rolling Code Type Immobilizer
123 Receiver Connector...........................................Gasoline E/G with Rolling Code Type Immobilizer
124 ICU Connector....................................................Gasoline E/G with Rolling Code Type Immobilizer
125 ICU .....................................................................Gasoline E/G with TOD (MSE ECU 3.2 Engine Only)
126 CAN Line............................................................Gasoline E/G with TOD (MSE ECU 3.2 Engine Only)
127 TOD ...................................................................Gasoline E/G with TOD (MSE ECU 3.2 Engine Only)
128 TOD ...................................................................Gasoline E/G with TOD (MSE ECU 3.2 Engine Only)
129 Transfer Case Speed Sensor.............................Gasoline E/G with TOD (MSE ECU 3.2 Engine Only)
130 Engine Main Wiring Connector...........................Gasoline E/G with MSE ECU
131 Remote Engine Start..........................................Diesel E/G with A/T & Black Out Lamp
132 Remote Engine Start..........................................Diesel E/G with A/T & Black Out Lamp
133 TCU ....................................................................Diesel E/G with BTRE A/T
134 TCU ....................................................................Diesel E/G with BTRE A/T
135 Ground 5............................................................Diesel E/G
136 Start Protection Relay.........................................Diesel E/G with Rolling Code Type Immobilizer
137 EGR control unit.................................................Diesel E/G
1 3 8 ICU 1..................................................................Diesel E/G with Rolling Code Type Immobilizer
1 3 9 ICU 2..................................................................Diesel E/G with Rolling Code Type Immobilizer
140 Injection Pump Valve Extension..........................Diesel E/G with Rolling Code Type Immobilizer
141 Injection Pump Valve Extension..........................Diesel E/G with Rolling Code Type Immobilizer
142 EGR Solenoid....................................................Diesel E/G
143 ICU led................................................................Diesel E/G with Rolling Code Type Immobilizer
144 Immobilizer Solenoid Valve..................................Diesel E/G with Crypto Type Immobilizer
147 Immobilizer Unit...................................................Diesel E/G with Crypto Type Immobilizer

9T-4 REMOTE KEYLESS ENTRY AND ANTI-THEFT SYSTEM
6. Buzzer output is as follows.
T1 : 0.3±0.1 sec.
T2 : 0.3±0.1 sec.
T : 0.6±0.2 sec.
Notice
lIn case of checking related devices, diagnosis switch
should always be ON.
lWhen operating the diagnosing related devices, there
will be buzzer sound if it is normal and no buzzer sound
if it is defective.
Self - Diagnosis List
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18Required Condition
Diagnosis switch ON
Battery voltage supply
Operation of battery
and related devices
IGN key insertion
Operation of IGN
and related devices
Operation of IGN and
starting and related
devicesRelated device check (operation)
Confirm the diagnosis function start
Check the battery
Tailgate, rear door lock switch
Driver’s door lock switch
Passenger’s door lock switch
Driver's door switch
Passenger and rear door switch
REKES input
Key reminder switch
IGN and power window relay
Parking brake switch
Seat belt switch
Washer switch
Wiper auto switch
ALT ‘L’
Volume variable switch
Defogger switch
Speed sensor signalNormal output
Buzzer once
Buzzer twice
Buzzer once
Buzzer once
Buzzer once
Buzzer once
Buzzer once
Buzzer once
Buzzer once
GN2 buzzer twice,
IGN1 buzzer once,
power window buzzer
3 times
Buzzer once
Buzzer once
Wiper motor parking 3
times, washer switch
once, wiper relay twice
Wiper motor parking 3
times, wiper auto
switch once, wiper
relay twice
Buzzer once
Buzzer once
Buzzer once
Buzzer onceRemark
Diagnosis
Switch ON

9W-2 IMMOBILIZER SYSTEM
Notice
lIf vehicle is equipped with immobilizer system and the engine
cranks normally but not start, check immobilizer system first
rather than ignition and other electrical systems because it
can be disabled fuel supply of injectors by ECU due to
defective immobilizer system.
lProgramming of the immobilizer system will be performed
by authorized personnel only. If following defective codes
for immobilizer system appear during diagnosis of vehicle
with SCANNER, ask immobilizer programming to authorized
personnel and actual programming should be performed
by authorized personnel only.
Display of defectives relevant to immobilizer system :
SCANNER
1. No communication with transponder
2. No immobilizer programming
lThe transponder in the key can be damaged by shocks of
dropping or hitting other objectives, so handle it with care.
lEach supplied key has programming of code on its own.
Accordingly if ECU needs to be replaced, replace the
transponder in the key.
lThe vehicle equipped with immobilizer system will never be
started with remote ignition device, so do not attempt to
install it.
lThe immobilizer system will never be removed from the
vehicle. So never attempt to remove it to install a remote
ignition device or others.
lIf engine does not start during service, use every key to
start the engine and then check immobilizer system finally.
FUNCTION DESCRIPTION
Immobilizer is a device disabling vehicle ignition unless a speific key is used and designed to help prevent vehicle
theft.
Immobilizer is comprised of two devices, a key with encoded transponder and engine control unit(ECU) with the same
encoding of the transponder. When a key is inserted into the key hole to start vehicle and turned to ‘ON’, the ECU
reads and decodes the transponder code and, if the same, starts the engine, it is called immobilizer. It means
immobilizer system disables starting by stopping fuel supply if the code in the transponder does not match the code
stored in ECU each other.
Cases that requires immobilizer
programming
1. Replacement ECU
In this case, replace the every transponder
of the key at once.
2. Replacement of the transponder
3. Additional key for lost 1 or 2 keys
1 ) Clear all codes for current keys from the
ECU
2 ) When using current key : clear code of
the transponder and re-program it
3) Additional (purchased) key : perform
programming
4. When lost all keys
1 ) Clear all memorized key codes from the
ECU
2 ) Replace the key and key set
3 ) Immobilizer programming