phone SUBARU CROSSTREK 2016 1.G Navigation Manual

OTHER SETTINGS
191
SETTINGS
7
No.Function
*16HOHFWWRFKDQJHWKHYHKLFOHFORFNVHWWLQJV
:3
Select to change the language.
Select to change the unit for measuring distance.
Select to turn the beep sound on/off.
Select to change the button and screen color.
Select to change the keyboard layout.
Select to turn on/off the setting that returns the display
to the split screen automatically after 20 seconds when
a screen other than the split screen is displayed.
Select to turn the animation function on/off.
6HOHFWWRFXVWRPL]HWKHVFUHHQRIILPDJH
:3
6HOHFWWRGHOHWHSHUVRQDOGDWD
:3
Select to set the connected device when using aha.
Select
USB (USB) when using an iPhone, and then
select
Bluetooth (Bluetooth) when using Android
devices.
No. Function
Select to set the connected device when using
Pandora*2. Select USB (USB) when using an iPhone,
and then select
Bluetooth (Bluetooth) when using
Android devices.
Select to update the Gracenote® database. For details,
contact your SUBARU dealer.
Select to display the software information. Notices
related to third party software used in this product are
enlisted. (This includes instructions for obtaining such
software, where applicable.)
Select to set the back camera delay control on/off.
When set to on, the back camera image displays for
approximately 6 seconds after moving the shift lever/
select lever “R” to any position other than “R”.
The display disappears when the shift lever/select lever
is moved to “P”, or when the vehicle speed reaches
approximately 5 mph (8 km/h) or faster.
Select to reset all setup items.
*1: With navigation function
*2: Pandora is available in the United States, Australia, and New Zealand.

BASIC OPERATION
200
No. OperationFunction
Point
informationSelect to open another screen
displaying information on the
selected map position (cursor). When
Bluetooth is enabled on your cellular
phone, a call can be placed if the
displayed information screen contains
phone number information.
Return to
normal
navigation
Select to return the map to the current
GPS position. Auto map rotation is
also enabled. The map operation
buttons are not displayed, and
navigation restarts.
Tilt up/down
Select to change the vertical display
angle of the map in 3D mode. Select
and hold to continue changing the
motion of the map screen.
No. Operation
Function
Selecting a
destinationSelect to select the cursor as a new
destination. The route is researched
automatically.
Additional
functionsSelect to display the additional
functions list. For example, saving
the cursor to the destination list, and
searching the area around the cursor.
Zoom in/out
Select to change the area of the map
displayed on the screen. Select and
hold to continue changing the scale of
the map screen.
NOTE
O
The map screen scale can be changed by double-touching or
SLQFKLQJWKHVFUHHQ
:3
O The map direction can be changed by rotating the screen.

:3

Siri
248
Siri
Siri®
Siri is a function that allows your iPhone and iPod touch to
be used without any manual operation by connecting your
device to the unit.
To use Siri, connect your device via Bluetooth.
BEFORE USING Siri
This section describes the preparation required to use Siri.
”Register your iPhone or iPod touch in the unit.

:3

” Connect your iPhone or iPod touch to the unit.

:3
‡When using the hands-free system, turn Phone on
(Connected).
‡ When listening to music, turn Phone and Audio
device on (Connected).

” Enable Siri in your iPhone or iPod touch settings.
(See Apple website for details.)
”
An iPhone and iPod touch data plan: If the data plan
for your iPhone and iPod touch does not provide for
unlimited data usage, additional charges from your
carrier may apply for accessing app-based connected
content via 3G, 4G, Wi-Fi, or 4G LTE wireless
networks.

” Connection to the internet via 3G, 4G, Wi-Fi, or 4G
LTE networks.
NOTE
O Available operations will differ based on your iPhone and iPod
touch.
O Be careful not to exceed the data usage limits for your iPhone
and iPod touch. Doing so will result in additional data usage
charges from your phone carrier.

Siri
249
Siri/VOICE RECOGNITION SYSTEM
9
USING Siri
STEERING SWITCH
XTy p e A
XTy p e B
Talk switch

”Press and hold the talk switch to start Siri.

” To cancel Siri, press and hold the talk switch.
MICROPHONE
The microphone is built into the map light slits.

”It is unnecessary to speak directly into the
microphone when using Siri.
Siri OPERATION
1.Press and hold the talk switch.
2.Speak when you hear the beep sound.

”If required to say more, the system will notify you with
the beep sound. Continue speaking.

” If the system fails to recognize what is being said, or
to request a different operation, select
, or press
the talk switch.

Siri
250
”
To cancel Siri, select
Cancel (Cancel), or press and
hold the talk switch.
NOTE
O Siri cannot be started while placing or receiving hands-free
calls with your iPhone and iPod touch (including while holding
incoming calls), or while having a hands-free conversation.
O Siri cannot be used while using the system’s voice recognition
function. Start Siri after exiting the voice recognition function.
O The system screen will display the calling screen when a hands-
free call is placed.
O Unit operation while using Siri will differ depending on your
iPhone or iPod touch.
O Siri may not recognize what is being said if:
‡ Spoken too quickly.
‡ Spoken at a low or high volume.
‡ Driving with a window open.
‡ Passengers are talking while using Siri.
‡ The air conditioning speed is set high.
‡ When air from the ventilator blows directly toward the
microphone.
O In the following conditions, the system may not recognize what is
being said properly, and use of Siri may not be possible.
‡ What is being said is incorrect or unclear. Note that certain
ZRUGV DFFHQWV RU VSHHFK SDWWHUQV PD\ EH GLI

VOICE RECOGNITION SYSTEM OPERATION
251
Siri/VOICE RECOGNITION SYSTEM
9
VOICE RECOGNITION SYSTEM OPERATION
VOICE RECOGNITION SYSTEM
The voice recognition system enables the navigation,
audio, hands-free systems, etc. to be operated using voice
commands.
Refer to the command list for samples of voice commands.

:3
USING THE VOICE RECOGNITION SYSTEM
STEERING SWITCH
XTy p e A
XTy p e B
Talk switch

” Press the talk switch to start the voice recognition
system.

” To cancel voice recognition, press and hold the talk
switch or the source switch.
MICROPHONE
The microphone is built into the map light slits.

”It is unnecessary to speak directly into the
microphone when giving a command.
NOTE
O :DLWIRUWKHFRQ

VOICE RECOGNITION SYSTEM OPERATION
252
NOTE
OVoice commands may not be recognized if:
‡ Spoken too quickly.
‡ Spoken at a low or high volume.
‡ Driving with a window open.
‡ Passengers are talking while voice commands are spoken.
‡ The air conditioning speed is set high.
‡ When air from the ventilator blows directly toward the
microphone.
O In the following conditions, the system may not recognize the
command properly and using voice commands may not be
possible:
‡ The command is incorrect or unclear. Note that certain words,
DFFHQWV RU VSHHFK SDWWHUQV PD\ EH GLI

VOICE RECOGNITION SYSTEM OPERATION
254
NOTE
OWhile the recognition data is being created or being updated, a
track search cannot be performed using a voice command.
VOICE COMMAND EXAMPLE: CALL NAME
1.Press the talk switch.
2.Say “Call ”.

” If multiple matching items are found, a selection
screen will be displayed. Say “” or select
the number.
NOTE
O In the same manner as it is displayed on the screen, “Call
(Call )”,
after saying “Call a contact” say the name, or the name and
type of phone, of a contact.
For example: “Call a contact ”,“John Smith ” or “Call a
contact ”,“Mary Davis ”,“Mobile ”
O There are 4 types of phones: Home, Mobile, Work and Other.
O Short or abbreviated names in the contacts list may not be
recognized. Change names in the contacts list to full names.
O 6RPHWLPHVDYRLFHUHFRJQLWLRQUHVXOWFRQ

VOICE RECOGNITION SYSTEM OPERATION
256
EXPRESSION EXAMPLES FOR EACH FUNCTION
CommandExpression examples
Call by specifying
contact Phone the number of
.
Ring
’s
number.
Call by specifying
phone number Phone
.
Search artists to
listen to song Put on the artist
.
Listen to the singer .
Search album names
to listen to song Listen to album
.
Play me the album .
Use navigation
function* Go to GPS
.
Go to address entry .
*: With navigation function

COMMAND LIST
258 XCommands for changing the audio mode
Voice command PhraseFunction
AM mode
change play AM, select AM Switch to AM
mode
FM mode change play FM, select FM Switch to FM
mode
SiriusXM radio
mode change play XM, select XM Switch to SiriusXM
mode
CD mode change play CD, select CD Switch to CD
mode
USB mode
change play USB, select USB Switch to USB
mode
SD mode
change* play microSD, select
microSD Switch to SD
mode
iPod mode
change play iPod, select iPod Switch to iPod
mode
AUX mode
change select AUX Switch to AUX
mode
Audio off mode
change audio off, turn off audio Turn off the Audio
Audio on mode
change audio on, turn on audio Turn on the Audio
*: With navigation function
X
Commands for changing the mode
Voice command PhraseFunction
Hands-free mode
change [go to] phone, phone
screen, phone menu
Switch to HF mode
Audio mode
change go to audio Switch to audio
mode
aha mode
change go to aha Switch to aha
mode
Pandora*
1 mode
change go to Pandora Switch to Pandora
mode
Navigation mode
change*
2
navigation,
go to navigation,
go to NAV system Switch to the voice
command on NAV
system
*1: Pandora is available in the United States, Australia, and New Zealand.
*2: With navigation function