wheel SUBARU FORESTER 2000 SF / 1.G Repair Manual

Maintenance and service10-3
–
CONTINUED –
Maintenance schedule
The sc hed uled maintenanc e items req uired to b e serv
ic ed at reg ular in-
tervals are shown in the “Warranty and Maintenanc e Booklet ”.
For d etails of your maintenanc e sc hed ule, read the sep arate “Warranty
and Maintenanc e Booklet ”.
Maintenance precautions
When maintenanc e and servic e are req uired , it is re c ommend ed that all
work b e d one b y an authorized SUBARU d ealer.
If you p erform maintenanc e and servic e b y yourself, you should familiar-
ize yourself with the information p rovid ed in this sec tion on g eneral main-
tenanc e and servic e for your SUBARU.
Inc orrec t or inc omp lete servic e c ould c ause imp rop e r or unsafe vehic le
op eration. Any p rob lems c aused b y imp rop er maintena nc e and servic e
p erformed b y you are not elig ib le for warranty c ove rag e.
WARNING
Testing of an All-Wheel Drive vehicle must NEVER be per-
formed on a single two-wheel dynamometer or similar apparatus nor should you install the FWD fuse in the engine compartment.Attempting to do so will result in transmission damage and inuncontrolled vehicle movement and may cause an accident or
injuries to persons nearby. Always select a safe area when performing maintenance on
your vehicle. Always be very careful to avoid injury when working on the ve-
hicle. Remember that some of the materials in the vehicle may behazardous if improperly used or handled, for example, batteryacid. Your vehicle should only be serviced by persons fully compe-
tent to do so. Serious personal injury may result to persons not
experienced in servicing vehicles.

10-38n
Parking brake lining
WARNING
A safe location and situation should be selected for break-in driv- ing.
CAUTION
Pulling the parking brake lever too forcefully may cause the rear
wheels to lock. To avoid this, be certain to pull the lever up slowly
and gently.
1. Drive the vehic le at a sp eed of ab out 22 mp h (35 km/h).
2. With the p arking b rake release b utton p ushed in, p ull the p arking
b rake lever SLOWLY and GENTLY. (Pulling with a forc e of ap p roxi-
mately 147 N [ 33 lb , 15 kg ] .)
3. Drive the vehic le for ab out 220 yard s (200 meters ) in this c ond ition.
4. Wait 5 to 10 minutes for the p arking b rake to c oo l d own. Rep eat
this p roc ed ure.
5. Chec k the p arking b rake stroke. If the p arking b r ake stroke is out
of the sp ec ified rang e, ad just it b y turning the ad justing nut loc ated
on the p arking b rake lever.
Parking b rake stroke: 7 — 8 notc hes / 196 N (44 lb , 20 kg )
Parking brake stroke
Chec k the p arking b rake stroke ac c ord ing to the mai ntenanc e sc hed ule
in the “Warranty and Maintenanc e Booklet ”. When the p arking b rake is
p rop erly ad justed , b raking p ower is fully ap p lied b y p ulling the lever up
seven to eig ht notc hes g ently b ut firmly (ab out 196 N, 44 lb , 20 kg ). If the
p arking b rake lever stroke is not within the sp ec if ied rang e, have the
b rake system c hec ked and ad justed at your SUBARU d e aler.

Maintenance and service10-39
–
CONTINUED –
HS0199
7 to 8 notches
Tires and wheels WARNING
When replacing a tire, make sure you use only the same size,
circumferece, construction, brand, and load range as the original tires listed on the tire placard. Using other sizes, circumferecesor construction may result in severe mechanical damage to thedrivetrain of your vehicle and may affect ride, handling, braking,
speedometer/odometer calibration, and clearance between thebody and tires. It also may be dangerous and lead to loss of ve-hicle control. Do not use a combination of radial, belted bias or bias tires
since it may cause dangerous handling characteristics and leadto an accident. Do not let air out of warm tires to adjust pressure. Doing so
will result in low tire pressure.
The tires should b e c hec ked freq uently for p rop er t ire p ressure, wear,
and c uts. Tire pressure
For the b est b alanc e b etween fuel ec onomy, tire lif e, rid e c omfort, and
hand ling , tire p ressure should b e maintained in ac c ord anc e with sp ec ifi-

10-40c ations. Chec k the tire p ressure when the tires are
c old . Cold means that
the vehic le has b een p arked for three hours or has b een d riven less than
1 mile (1.6 km).
HS0251
The rec ommend ed tire p ressure and sizes are p rovid e d on the tire p lac -
ard , whic h is loc ated und er the d oor latc h on the d river’s sid e.
Adjusting the tire pressure
The tire p lac ard shows the rec ommend ed tire p ressur es at lig ht load ,
at full load and when towing a trailer. If the vehi c le is load ed with three
oc c up ants or less, ad just the tire p ressure to the level rec ommend ed
for lig ht load . If the vehic le is more load ed , ad ju st it to the level rec om-
mend ed for full load . When towing a trailer, ad just it to the level rec -
ommend ed for that op eration.
Tire rotation
Tire wear will vary with eac h wheel. To inc rease th e life of tires and keep
wear uniform, it is b est to rotate them every 7,500 miles (12,500 km).
When rotating tires, rep lac e any unevenly worn or d amag ed tire. After
rotating the tires, ad just tire p ressure and b e sur e to c hec k wheel nut
tig htness.

Maintenance and service10-41
–
CONTINUED –
OM-H0231
New tread Worn tread
HS0201
Tread wear indicator
A tire should b e rep lac ed when the tread wear ind ic ator ap p ears as a
solid b and ac ross the tread . The ind ic ators ap p ear when the remaining
tread has b een worn to 0.063 in (1.6 mm) or less. NOTE When any of the wheels is removed and replaced for tire rotation or to change a flat tire, always check the tightness of the wheel nutsafter driving approximately 600 miles (1,000 km). If any nut is loose,tighten it to the specified torque.
Aluminum wheels (If equipped)
Aluminum wheels c an b e sc ratc hed and d amag ed easily . Hand le them
c arefully to maintain their ap p earanc e, p erformanc e , and safety.
When any of the wheels is removed and rep lac ed for tire rotation or to
c hang e a flat, always c hec k the tig htness of the wh eel nuts after d riving
ap p roximatly 600 miles (1,000 km). If any nut is lo ose, tig hten it to the
sp ec ified torq ue. Never ap p ly oil to the thread ed p arts, wheel nuts, or tap ered surfac e
of the wheel. Never let the wheel rub ag ainst sharp p rotrusions o r c urb s.
Be sure to fit tire c hains on uniformly and c omp let ely around the tire,
otherwise the c hains may sc ratc h the wheel. When wheel nuts, b alanc e weig hts, or the c enter c ap are rep lac ed ,

10-42b e sure to rep lac e them with g enuine SUBARU p arts d
esig ned for alumi-
num wheels.
Fuses
HS0203
HS0202
The fuses are d esig ned to melt d uring an overload t o p revent d amag e to
the wiring harness and elec tric al eq uip ment. The fu ses are loc ated in
two fuse b oxes.
If any lig hts, ac c essories or other elec tric al c ont rols d o not op erate, in-
sp ec t the c orresp ond ing fuse. If a fuse has b lown, rep lac e it.
HS0204
Good Blown

11
Specifications Specifications11-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions 11-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Engine 11-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical system 11-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Capacities 11-3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tires 11-3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wheel alignment 11-3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuses and circuits 11-4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuse panel located behind the coin tray 11-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuse panel located in the engine compartment 11-6 . . . . . . . . . . . . . . . . . . .
Bulb chart 11-7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Vehicle identification 11-8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11-2Specifications
These sp ec ific ations are sub jec t to c hang e without
notic e.
Dimensions
Overall leng th 175.2 in. (4,450 mm)
Overall wid th 68.3 in. (1,735 mm)
Overall heig ht 62.8 in. (1,595 mm)
Ground c learanc e 7.5 in. (190 mm)
Front tread 58.1 in. (1,475 mm)
Rear tread 57.1 in. (1,450 mm)
Wheelb ase 99.4 in. (2,525 mm)
Engine
Eng ine mod el EJ251
Eng ine typ e Horizontally op p osed , liq uid c ooled
4 c ylind er, 4 stroke g asoline eng ine
Eng ine d isp lac ement 149.9 c u in. (2,457 c c )
Bore 3.92 in. (99.5 mm)
Stroke 3.11 in. (79.0 mm)
Comp ression ratio 10.0 : 1
Firing ord er 1 - 3 - 2 - 4
Electrical system
Battery
Typ e MT: 55D23L, AT: 75D23L
Reserve c ap ac ity MT: 99 min., AT: 118 min.
Cold c ranking amp ere MT: 356 amp ., AT: 520 amp .
Alternator 12V - 75A
Sp ark p lug s RC10YC4 (Champ ion),
RC8YC4 (Champ ion),
BKR6E-11 (NGK),
K20PR-U11 (NIPPONDENSO)
Sp ark p lug g ap 0.039 to 0.043 in. (1.0 to 1.1 mm)

Specifications11-3
–
CONTINUED –

Capacities
Fuel tank 15.9 US g al (60 liter, 13.2 Imp g al)
Eng ine oil 4.2 US q t (4.0 liter, 3.5 Imp q t)
Manual transmission oil 3.7 US q t (3.5 liter, 3.1 Im p q t)
Automatic transmission fluid 9.8 US q t (9.3 liter, 8.2 Imp q t)
AT d ifferential g ear oil 1.3 US q t (1.2 liter, 1.1 I mp q t)
AWD rear d ifferential g ear oil 0.8 US q t (0.8 liter, 0.7 Imp q t)
Power steering fluid 0.7 US q t (0.7 liter, 0.6 Imp q t)
Eng ine c oolant 6.6 US q t (6.2 liter, 5.5 Imp q t)
Tires
Typ e Steel b elted rad ial, Tub eless
Size P205/70 R15 95S
P215/60 R16 94H
Pressure Front
(lig ht load ) 29 p si (200 kPa, 2.0 kg /c m 2
)
(full load ) 29 p si (200 kPa, 2.0 kg /c m 2
)
Rear
(lig ht load ) 26 p si (180 kPa, 1.8 kg /c m 2
)
(full load ) 36 p si (250 kPa, 2.5 kg /c m 2
)
Trailer towing Front 29 p si (200 kPa, 2.0 kg /c m 2
)
Rear 41 p si (280 kPa, 2.8 kg /c m 2
)
Wheel size 15 x 6JJ, 16 x 6 1
/2 JJ
Wheel alignment
Toe Front 0 0.12 in. (0 3 mm)
Rear 0.04 – 0.16 in. (1 – 4 mm)
Camb er Front –0 15 ’
Rear –0 15 ’

Consumer information and Reporting safety defects12-3
–
CONTINUED –

Temperature A, B, C
The temp erature g rad es are A (hig hest), B and C, re p resenting the tire’s
resistanc e to g eneration of heat and its ab ility to d issip ate heat when
tested und er c ontrolled c ond itions on a sp ec ified i nd oor lab oratory test
wheel. Sustained hig h temp erature c an c ause the mat erial of the tire to
d eg enerate and red uc e tire life, and exc essive temp erature c an lead to
sud d en tire failure. Grad e C c orresp ond s to a level of p erformanc e
whic h all p asseng er c ar tires must meet und er the F ed eral Motor Vehic le
Safety Stand ard s No. 109. Grad es B and A rep resent hig her levels of
p erformanc e on the lab oratory test wheel than the m inimum req uired b y
law.
WARNING
The temperature grade for a tire is established for one that is
properly inflated and not overloaded. Excessive speed, under
inflation or excessive loading, either separately or in combina-tion, can cause heat buildup and possible tire failure.