buttons SUBARU FORESTER 2000 SF / 1.G Owners Manual

5-4NOTE
You may find that the antenna is already installed on the vehicle
at the time of delivery. In that case, ask your SUBARU dealerabout the storage location of the special wrench.
FM reception
Althoug h FM is normally static free, rec ep tion c an b e affec ted b y the sur-
round ing area, atmosp heric c ond itions, station stre ng th and transmitter
d istanc e. Build ing s or other ob struc tions may c ause momentary static ,
flutter or station interferenc e. If rec ep tion c onti nues to b e unsatisfac tory,
switc h to a strong er station.
AM/FM stereo radio with cassette player
The rad io will op erate only when the ig nition switc h is in the “ACC ” or
“ ON ” p ositions.
Radio operation
Waveband indicator
HG0084
Tone and balance control button
SCAN buttonPower switch andvolume controlTuning buttons
Preset buttons FM/AM selection switchDISP button
Stereo indicator
Press stationnumber Frequency

Audio5-9
–
CONTINUED –

Automatic tuning (SCN)
Press the “SCN ” b utton to c hang e the rad io to the SCAN mod e. In th is
mod e, the rad io sc ans throug h the rad io b and until a station is found .
The rad io will stop at the station for five sec ond s while d isp laying the fre-
q uenc y, after whic h sc anning will c ontinue until th e entire b and has b een
sc anned from the low end to the hig h end .
Press the “SCN ” b utton ag ain to c anc el the SCAN mod e and to stop o n
any d isp layed freq uenc y.
When the “SCN ” b utton is p ressed for automatic tuning , stations a re
sc anned in the d irec tion of low freq uenc ies to hig h freq uenc ies only.
Automatic tuning may not func tion p rop erly if the s tation rec ep tion is
weakened b y d istanc e from the station or p roximity to tall b uild ing s and
hills. Selecting preset stations
Presetting a station with a p reset b utton allows yo u to selec t that station
in a sing le op eration. Up to six AM and FM stations eac h may b e p reset.
How to preset stations
1. Press the FM/AM selec tion switc h to selec t either FM or AM rec ep tion.
2. Press the “SCN ” b utton or tune the rad io manually until the d esire d
station freq uenc y is d isp layed .
3. Press one of the p reset b uttons for at least two seconds to store the
freq uenc y. The freq uenc y of the station will flash onc e on the d isp lay at
this time. If the b utton is p ressed for less than t wo sec ond s, the p rec ed -
ing selec tion will remain in memory. NOTE
If the connection between the radio and battery is broken for any reason such as vehicle maintenance or radio removal, all stationsstored in the preset buttons are cleared. If this occurs, it is neces-sary to reset the preset buttons.

5-10Cassette player operation
Stop and eject button
HG0093
Tape travel indicator
Cassette player operation indicator
Metal tape button
Metal tape indicator
Tape program sensor buttonNR button Fast forward/ Rewind button (Program switching buttons)
NR indicator
Cassette slot
NOTE Only use good quality cassettes (cassettes longer than C-90 are
not recommended). Put cassettes back in their boxes immediately after use to protect
them from dust and dirt and to prevent the tape from unwinding. Never expose cassettes to heat, direct sunlight or moisture.
Clean the tape head (once or twice a month) using a wet-type
cleaning cassette .
Cassette slot
Insert a c assette with the exp osed tap e sid e fac ing to the rig ht. After
insertion, p layb ac k starts. Tape travel indicators
These ind ic ate the d irec tion the c assette tap e is m oving .
:ind ic ates that the top sid e of the c assette is b ein g p layed b ac k.
:ind ic ates that the b ottom sid e of the c assette is b eing p layed b ac k.

Audio5-11
–
CONTINUED –

Program switching buttons (PROG)
When the p rog ram switc hing b uttons ( “
” and “” b uttons) are
p ressed at the same time d uring p layb ac k, the tap e travel ind ic ators will
switc h and the p layer will b eg in p laying b ac k the o p p osite sid e of the
tap e. The same mec hanism is automatic ally ac tivated when the end of
the tap e is reac hed . This allows the op p osite sid e of the tap e to p lay,
p rovid ing c ontinuous p layb ac k. Fast-forward button
To fast-forward the tap e, p ress the “
” or “” b utton in the same
d irec tion to the tap e travel ind ic ator. To stop fas t-forward ing , lig htly p ress
the op p osite sid e of the “
” or “” b utton.
Rewind button
To rewind the tap e, p ress the “
” or “” b utton in the op p osite
d irec tion to the tap e travel ind ic ator. To stop rew ind ing , lig htly p ress the
op p osite sid e of the “
” or “” b utton.
Stop and eject button (
)
When “
” b utton is p ressed , p lay b ac k stop s and the c assett e tap e is
ejec ted .
Before the ig nition switc h turn to the “OFF ” p osition, ejec t the tap e from
the p layer. Always make c ertain that you remove the c assette tap e.
Tape program sensor button (TPS)
Press “TPS ” b utton d uring p layb ac k to return to the b eg inning of the c ur-
rent selec tion or to skip to the b eg inning of the n ext selec tion. To use this
func tion, p ress the “TPS ” b utton to turn on the “TPS ” ind ic ator. If the fast-
forward b utton is then p ressed , the p layer ad vanc es the tap e to the b e-
g inning of the next selec tion and starts p laying it . If the rewind b utton is
p ressed instead , the p layer rewind s the tap e to the b eg inning of the c ur-
rent selec tion and starts rep laying it. The “TPS ” func tion may not op erate
p rop erly und er the following c ond itions:
When the rec ord ing level is low.
When there are long p auses in the mid d le of a selec tion.

5-12
When the tap e c ontains verb al material suc h as c onv ersations.
When the b lanks b etween selec tions are shorter than five sec ond s.
When there are no b lanks b etween selec tions (live c onc erts, etc .).
Dolby NR button (BNR)
Press “BNR ” b utton when p laying tap es rec ord ed using the Dolb y NR
system*. The “BNR ” ind ic ator will lig ht up and hig h-freq uenc y noise o n
the tap e will b e red uc ed for c learer sound rep rod uc tion.
* Noise red uc tion system manufac tured und er lic ens e from Dolb y Lab oratories
Lic ensing Corp oration. “Dolb y ” and the d oub le-D Symb ol are trad e marks of
Dolb y Lab oratories Lic ensing Corp oration. Metal tape button (MTL)
Press the “MTL ” b utton when p laying a metal or CrO
2 tap e.
Clock function
The rad io has a b uilt-in c loc k func tion that d isp la ys the time when the
ig nition switc h is turned either to “ACC ” or “ON ”.
HG0094
“DISP” buttons
Tuning buttons