display SUBARU FORESTER 2016 SJ / 4.G Navigation Manual

SETUP
221
NAVIGATION SYSTEM
8
SETUP
NAVIGATION SETTINGS
OPTIONAL FUNCTIONS
Various options are available from the “More (More)” menu.
1.SelectMenu (Menu) on the map screen.
2.SelectMore (More).
3.Select the items to be set.
No. Function
<00360048004f004800460057000300570052000300460052005100bf004a0058005500480003005300550052004a0055004400500056000300440051004700030046004b00440051004a00480003005200530048005500440057004c005200510044004f00
03>
patterns for the software. Performs functions such as
¿QHWXQLQJURXWHVHDUFKRSWLRQVFKDQJLQJWKHPDS
screen design, turning warnings on or off, and launching
WKH³&RQ¿JXUDWLRQ:L]DUG&RQ¿JXUDWLRQ:L]DUG´
Select to check global sunrise and sunset times. Places
a mark on the map to show the user’s current position
and route points. Select Details button to check accurate
sunrise and sunset times for all points along the route
<000b00460058005500550048005100570003005300520056004c0057004c00520051000f00030044004f004f0003005a0044005c00530052004c005100570056000f000300bf00510044004f00030047004800560057004c005100440057004c0052005100
0c0011>
Select to display a list of all trip logs, whether they are
saved by the user upon reaching the destination or
whether they are saved automatically. Select an item
from the trip that is displayed, you can check trip data,
speeds, and more detailed contents. When a path log
has been saved, you can display it on the map in the
color selected.

SETUP
222
No. Function
Select to display a tutorial allowing for a quick grasp
of the software’s functions, and starts a demonstration
showing a sample route simulation to check the
navigation functions. The about section displays
product information. Here you can view the software
and database user license agreements, search for the
contents license, and check the software ID. You can
check statistical data for program use.
SCREENS FOR NAVIGATION SETTINGS
1.'LVSOD\WKH

SETUP
226
3.Select the items to be set.
No. Function
Select to select the display mode from 2D north-up, 2D
heading-up or 3D.
Select to adjust the standard zoom and the angle of tilt.
You can set the level in three stages.
Select to turn the auto zoom function on or off.
Select to automatically reduce the scale of the 2D map
to display the entire route.
No. Function
Select to select the screen color used in daytime mode.
Select to select the screen color used in nighttime mode.
Select to select the switches that display on the map.
Select to turn the path log save function on or off (saves
in positional order for each trip).
Select a spot displayed on the map during navigation.
Select the check box to show or hide the spot category.
Select the spot category name to open a sub-category.
More (More): Select to save the currently displayed
spot position, or read spot displays saved previously.
You can also restore the default display settings.

”By turning ON the “Auto Zoom (Auto Zoom)” function,
“Viewpoint (Viewpoint)” and “Automatic Overview
(Automatic Overview)” cannot be set.
UNITS AND FORMATS
Sets the units used by the program to measure distance.
Voice guidance languages do not support all units displayed
in the list.

SETUP
227
NAVIGATION SYSTEM
8
You can select to display the time in various international
date formats.
1.'LVSOD\WKH

SETUP
228
3.Select the items to be set.
No. Function
<00360048004f004800460057000300570052000300560048005700030057004b004800030047004400570044000300bf0048004f004700560011000300360048004f00480046005700030057004b00480003004a0058004c00470044005100460048000300
5c005200580003>
want to display. You can select route data related to the
<00bf00510044004f00030047004800560057004c005100440057004c0052005100030052005500030057004b0048000300510048005b00570003005a0044005c00530052004c0051005700030052005100030057004b004800030055005200580057004800
11>
Displays service area information while driving on the
expressway. Select to turn this function on and off.
Select to select the service area information display
items.
No. Function
When information is available, lane information similar to
<0052005900480055004b004800440047000300550052004400470003005700550044004900bf004600030056004c004a005100560003004c005600030047004c00560053004f0044005c0048004700030044005700030057004b0048000300570052005300
030052004900030057004b00480003>
map. Select to turn this function on and off.
When approaching an expressway exit or a complicated
intersection, the map switches to a 3D display if the
necessary information can be displayed. Select to turn
this function on and off.
Select to turn on the route progress bar which is
displayed as a straight line to the left of the map. This
shows the progress made on the current route. When
a blue arrow is used to indicate position, the arrow
continues to rise as you drive towards your destination.
:D<005c00530052004c00510057005600030044005100470003005700550044004900bf004600030046005200510047004c0057004c005200510056000300440055004800030047004c00560053004f0044005c0048004700030052005100030057004b004800
03>
line.

TIPS FOR THE NAVIGATION SYSTEM
229
NAVIGATION SYSTEM
8
TIPS FOR THE NAVIGATION SYSTEM
GPS (GLOBAL POSITIONING
SYSTEM)
REGARDING ERRORS IN CURRENT
POSITION DISPLAY
The system displays the vehicle current position based on
GPS information and data from various sensors and road
maps. However, when the radiowave signals from GPS
satellites are weak or when signals are received from only
two satellites or less, errors may occur in the position.
Modifying or adjusting the system will not prevent these
errors.
LIMITATIONS OF THE NAVIGATION SYSTEM
This navigation system calculates the current position using
satellite signals, various vehicle signals, map data, etc.
However, an accurate position may not be shown depending
RQ VDWHOOLWH FRQGLWLRQV URDG FRQ

TIPS FOR THE NAVIGATION SYSTEM
230
CAUTION
OThe installation of window tinting may obstruct the GPS
signals. Most window tinting contains some metallic content
that will interfere with GPS signal reception of the antenna in
the instrument panel. We advise against the use of window
tinting on vehicles equipped with navigation systems.

”Accurate current position may not be shown in the
following cases:
‡When driving on a small angled Y-shaped road.
‡When driving on a winding road.
‡When driving on a slippery road such as in sand,
gravel, snow, etc.
‡When driving on a long straight road.
‡When freeway and surface streets run in parallel.
‡After moving by ferry or vehicle carrier.
‡When a long route is searched during high speed
driving.
‡After repeating a change of direction by going
forward and backward, or turning on a turntable in
a parking lot.
‡When leaving a covered parking lot or parking
garage.‡When a roof carrier is installed.
‡When driving with tire chains installed.
‡When the tires are worn.
‡After replacing a tire or tires.
‡When using tires that are smaller or larger than the
IDFWRU\VSHFL¿FDWLRQV
‡When the tire pressure in any of the 4 tires is not
correct.

”Inappropriate route guidance may occur in the
following cases:
‡When turning at an intersection off the designated
route guidance.
‡If you set more than 1 destination but skip any of
them, auto reroute will display a route returning to
the destination on the previous route.
‡When turning at an intersection for which there is
no route guidance.
‡When passing through an intersection for which
there is no route guidance.
‡During auto reroute, the route guidance may not be
available for the next turn to the right or left.
‡During high speed driving, it may take a long time
for auto reroute to operate. In auto reroute, a detour
route may be shown.

VOICE RECOGNITION SYSTEM OPERATION
235
VOICE RECOGNITION SYSTEM
9
VOICE RECOGNITION SYSTEM OPERATION
1.Press the talk switch.

”After the voice recognition top screen has been
displayed, speech guidance will commence.
NOTE
OA caution display appears after pressing the talk switch while
an external device is connected and the stored data is being
read. Be sure to start the operation after the caution display
disappears.
OWhen the voice recognition mode is audio mode, voice guidance
for the voice recognition system can be skipped by pressing the
talk switch.
2.Say the command.

”Commands related with each function are displayed
on the screen of the each function tab. Some
commonly used commands are displayed on the
screen of the main tab. Even if any tab is selected, all
commands can be operated.

”Selecting
Help +HOS RU VD\LQJ“Help” prompts
voice guidance to offer examples of commands and
operation methods.

”To cancel voice recognition, select
Cancel &DQFHO
or press and hold the talk switch.

VOICE RECOGNITION SYSTEM OPERATION
237
VOICE RECOGNITION SYSTEM
9
NOTE
OWhile the recognition data is being created or being updated, a
track search cannot be performed using a voice command.
VOICE COMMAND EXAMPLE: CALL NAME
1.Press the talk switch.
2.Say“Call ”.

”If multiple matching items are found, a selection
screen will be displayed. Say “” or select
the number.
NOTE
OIn the same manner as it is displayed on the screen, “Call
(Call )”,
after saying “Call a contact” say the name, or the name and
type of phone, of a contact.
For example: “Call a contact”,“John Smith” or “Call a
contact”,“Mary Davis”,“Mobile”
OThere are 4 types of phones: Home, Mobile, Work and Other.
OShort or abbreviated names in the contacts list may not be
recognized. Change names in the contacts list to full names.
O6RPHWLPHVDYRLFHUHFRJQLWLRQUHVXOWFRQ

VOICE RECOGNITION SYSTEM OPERATION
238
”As the system cannot recognize additional numbers,
say the complete number without stopping.
CASUAL SPEECH RECOGNITION
Due to natural language speech recognition technology, this
system enables recognition of a command when spoken
naturally. However, the system cannot recognize every
variation of each command. In some situations, it is possible
to omit the command for the procedure and directly state the
desired operation. Not all voice commands are displayed in
the function menu.
NOTE
OIf the command cannot be recognized completely, the command
input screen will be displayed. (Search results will be shown
based on the part of the command that was recognized.)
EXPRESSION EXAMPLES FOR EACH FUNCTION
Command Expression examples
Call by specifying
contactPhone the number of
.
Ring ’s
number.
Call by specifying
phone numberPhone .
Search artists to
listen to songPut on the artist .
Listen to the singer .
Search album names
to listen to songListen to album.
Play me the album .
Use navigation
function*Go to GPS.
Go to address entry.
*: With navigation function