phone SUBARU FORESTER 2016 SJ / 4.G Navigation Manual
[x] Cancel search | Manufacturer: SUBARU, Model Year: 2016, Model line: FORESTER, Model: SUBARU FORESTER 2016 SJ / 4.GPages: 291, PDF Size: 11.3 MB
Page 86 of 291
MEDIA OPERATION
84
NOTE
ODepending on the Bluetooth device that is connected to the
system, the music may start playing when selecting while
it is paused. Conversely, the music may pause when selecting
while it is playing.
OIn the following conditions, the system may not function:
‡ The Bluetooth device is turned off.
‡ The Bluetooth device is not connected.
‡ The Bluetooth device has a low battery.
OIt may take time to connect the phone when Bluetooth audio is
being played.
OFor operating the portable player, see the instruction manual that
comes with it.
OIf the Bluetooth device is disconnected due to poor reception
from the Bluetooth network when the ignition switch is turned
to the “ACC” or “ON” position, the system will automatically
reconnect to the portable player.
OIf the Bluetooth device is disconnected on purpose, such as it
was turned off, this does not happen. Reconnect the portable
player manually.
OBluetooth device information is registered when the Bluetooth
device is connected to the Bluetooth audio system. When
selling or disposing of the vehicle, remove the Bluetooth audio
L Q I R U P D W L R Q I U R P W K H V \ V W H P : 3
CONNECTING A Bluetooth DEVICE
To use the Bluetooth audio system, it is necessary to
register a Bluetooth device with the system.
XRegistering an additional device
1.SelectSelect Device (Select Device) on the Bluetooth
audio control screen.
2. ) R U P R U H L Q I R U P D W L R Q : 3
XSelecting a registered device
1.SelectSelect Device (Select Device) on the Bluetooth
audio control screen.
2. ) R U P R U H L Q I R U P D W L R Q : 3
Page 94 of 291
TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
92
TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
OPERATING INFORMATION
CAUTION
OTo avoid damage to the audio/visual system:
‡ Be careful not to spill beverages over the audio/visual
system.
‡ Do not put anything other than an appropriate disc into the
disc slot.
‡ Do not insert anything other than an SD card into the SD
card slot.
NOTE
OThe use of a cellular phone inside or near the vehicle may cause
a noise from the speakers of the audio/visual system which you
are listening to. However, this does not indicate a malfunction.
RADIO
Usually, a problem with radio reception does not mean there
is a problem with the radio — it is just the normal result of
conditions outside the vehicle.
For example, nearby buildings and terrain can interfere
with FM reception. Power lines or phone wires can interfere
with AM signals. And of course, radio signals have a limited
range. The farther the vehicle is from a station, the weaker
its signal will be. In addition, reception conditions change
constantly as the vehicle moves.
Here, some common reception problems that probably do
not indicate a problem with the radio are described.
FM
Fading and drifting stations: Generally, the effective range
of FM is about 25 miles (40 km). Once outside this range,
you may notice fading and drifting, which increase with
the distance from the radio transmitter. They are often
accompanied by distortion.
0 X O W L S D W K ) 0 V L J Q D O V D U H U H
Page 99 of 291
TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
97
AUDIO
3
iPod
The following iPod®, iPod nano®, iPod classic®, iPod
touch® and iPhone® devices can be used with this system.
Made for
”iPod touch (5th generation)
”iPod touch (4th generation)
”iPod touch (3rd generation)*
”iPod touch (2nd generation)*
”iPod touch (1st generation)*
”iPod classic
”iPod with video*
”iPod nano (7th generation)
”iPod nano (6th generation)
”iPod nano (5th generation)
”iPod nano (4th generation)
”iPod nano (3rd generation)
”iPod nano (2nd generation)*
”iPod nano (1st generation)*
”iPhone 5
”iPhone 4S
”iPhone 4*”iPhone 3GS*
”iPhone 3G*
”iPhone**: The voice recognition system not supported
”Depending on differences between models or
software versions etc., some models might be
incompatible with this system.
”iPod video is not supported.
”For USA customers, please visit www.subaru.com for
details. Outside of the USA customers, contact your
local dealer to arrange a demonstration in order to
F R Q
Page 107 of 291
105
PHONE
4
4
Page 108 of 291
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
106
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
QUICK REFERENCE
The phone top screen can be used to make a phone call. To
display the hands-free operation screen, select
and
then select
PHONE (PHONE), select *, or press
the
switch on the steering wheel.
Several functions are available to operate on each screen
that is displayed by selecting the 4 tabs.
*: Without navigation function
Function Page
Phone
operationRegistering/connecting Bluetooth phone 164
Calling on the Bluetooth phone 110
Receiving on the Bluetooth phone 115
Talking on the Bluetooth phone 116
Message
functionUsing the Bluetooth phone message
function11 9
Setting up
a phonePhone settings 125
Bluetooth settings 168
Page 109 of 291
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
107
PHONE
4
SOME BASICS
The hands-free system enables calls to be made and
received without having to take your hands off the steering
wheel.
This system supports Bluetooth. Bluetooth is a wireless
data system that enables cellular phones to be used without
being connected by a cable or placed in a cradle.
The operating procedure of the phone is explained here.
WARNING
OWhile driving, do not use a cellular phone or connect the
Bluetooth phone.
O < R X U D X G L R X Q L W L V
Page 110 of 291
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
108
NOTE
OKeep call volume down. Otherwise, the other party’s voice
may be audible outside the vehicle and voice echo may
increase. When talking on the phone, speak clearly towards the
microphone.
OThe other party may not hear you clearly when:
‡ <00270055004c0059004c0051004a000300520051000300440051000300580051005300440059004800470003005500520044004700110003000b00300044004e004c0051004a00030048005b0046004800560056004c005900480003005700550044004900
bf0046000300510052004c005600480011000c>
‡ Driving at high speeds.
‡ Driving with a window open.
‡ When air from the ventilator blows directly toward the
microphone.
‡ The sound of the air conditioning fan is loud.
‡ There is a negative effect on sound quality due to the phone
and/or network being used.
REGISTERING/CONNECTING A Bluetooth
PHONE
To use the hands-free system for cellular phones, it is
necessary to register a cellular phone with the system.
: 3
Bluetooth PHONE CONDITION DISPLAY
The condition of the Bluetooth phone appears on the upper
U L J K W V L G H R I W K H V F U H H Q : 3
USING THE PHONE SWITCH/MICROPHONE
XSteering switch
By pressing the phone switch, a call can be received or
ended without taking your hands off the steering wheel.
Volume control switch
”Press the “+” side to increase the volume.
”Press the “-” side to decrease the volume.
Off hook switch
On hook switch
XMicrophone
The microphone is built into the map light slits.
Page 111 of 291
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
109
PHONE
4
VOICE RECOGNITION SYSTEM
Press this switch to operate the voice recognition system.
”The voice recognition system and its list of
F R P P D Q G V F D Q E H R S H U D W H G : 3
ABOUT THE CONTACTS IN THE CONTACT
LIST
”The following data is stored for every registered
phone. When another phone is connected, the
following registered data cannot be read:
‡ Contact data
‡ Call history data
‡ Speed dial data
‡ Image data
‡ All phone settings
‡ Message settings
NOTE
OWhen a phone’s registration is deleted, the above-mentioned
data is also deleted.
Page 112 of 291
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
11 0
WHEN SELLING OR DISPOSING OF THE
VEHICLE
A lot of personal data is registered when the hands-free
system is used. When selling or disposing of the vehicle,
L Q L W L D O L ] H W K H G D W D : 3
”The following data in the system can be initialized:
‡ Contact data
‡ Call history data
‡ Speed dial data
‡ Image data
‡ All phone settings
‡ Message settings
NOTE
OOnce initialized, the data and settings will be erased. Pay much
attention when initializing the data.
CALLING ON THE Bluetooth
PHONE
After a Bluetooth phone has been registered, a call can
be made using the hands-free system. There are several
methods by which a call can be made, as described below.
XWithout navigation function
1.Select.
2.Select the desired tab to call from.
Page 113 of 291
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
111
PHONE
4
XWith navigation function
1.Select.
2.SelectPHONE (PHONE).
3.Select the desired tab to call from.
”The phone top screen can be displayed by pressing
the switch on the steering wheel.
How to make a call list Page
By speed dial list 111
How to make a call list Page
By call history 112
By contacts list 113
By dial pad*
111 3
By e-mail/SMS/MMS 123
By POI call*
2185
By off hook switch 114
By voice recognition system 237
By split screen 114
*1: The operation cannot be performed while driving.
*2: With navigation function
BY SPEED DIAL LIST
Calls can be made using registered contacts which can be
V H O H F W H G I U R P D F R Q W D F W O L V W : 3
1. ' L V S O D \ W K H S K R Q H W R S V F U H H Q : 3