audio SUBARU FORESTER 2016 SJ / 4.G Navigation Manual

MirrorLink™
140 XControl screen


*: The displayed screen will differ depending on the connected smartphone.
No. Function
Select to choose a MirrorLink™ device.
6HOHFWWRFKDQJHWKHVFUHHQVL]H
:3
Select to return the application list screen.
Displays software buttons that function as the buttons
on the smartphone.
Select to change the other audio source (Radio, Disc
etc.).
WARNING
ODo not operate the player’s controls or connect the
smartphone while driving.
CAUTION
ODo not leave your smartphone in the car. In particular, high
temperatures inside the vehicle may damage the smartphone.
NOTE
O)ROORZ WKH VSHFL

ahaTM by HARMAN
142
ahaTM by HARMAN
ahaTM by HARMAN
aha is a cloud-based application that connects to the system
and gives you access to your favorite web content safely
and easily. There are over 40,000 stations spanning internet
radio, personalized music, audiobooks, Facebook, Twitter,
restaurant and hotel searches, weather and more. For more
about aha, go to the aha site (http://www.aharadio.com).
When connecting iPhone or Android devices with the aha
application installed, you can control, view, and hear aha
content through the system.
In order to connect to this system, use a USB port for
an iPhone and use Android devices via Bluetooth.
With navigation function: You may be also display POI
information from the aha application on the map screen and
route to these POIs.
In this chapter, iPhone or Android devices will be referred to
as a smartphone.
OVERVIEW
XControl panel
No. Function
Turn to adjust volume.
Press to turn the audio system on/off.
Turn to display the next/previous content item.
Press to select an audio mode.
Select to display the next/previous content item.
Select to display the “APPS (APPS)” screen.

APPS
5
ahaTM by HARMAN
143 XControl screen


No. Function
Select to display a list of preset stations.
A maximum of 35 entries can be displayed in this list.
Select to display a list of stations using the location
information.
A maximum of 10 entries can be displayed in this list.
Select to display the audio source selection screen.
No. Function
Station list
Select to display the station operation screen.
Displays station name.
Select to display the top screen.
6HOHFWWRGLVSOD\WKHVRXQGVHWWLQJVFUHHQ
:3
6WDWLRQRSHUDWLRQVFUHHQEXWWRQV
:3
Select to change the station operation screen buttons.
Select to display the content item list.
Displays cover art.
WARNING
ODo not connect or operate the smartphone while driving.
OBe sure to park the vehicle in a safe location before
connecting or operating the smartphone.
CAUTION
ODo not leave your smartphone in the car. In particular, high
temperatures inside the vehicle may damage the smartphone.

APPS
5
Pandora®
151 XControl screen
No. Function
Select to display the audio source selection screen.
6HOHFWWRGLVSOD\WKHVRXQGVHWWLQJVFUHHQ
:3
Shows progress.
Select to rate the track currently playing as “Like” or
“Dislike”.
Select to bookmark the track currently playing.
No. Function
Select to skip to the next track.
Select to play/pause.
Select to display a station list.
Displays cover art.
WARNING
ODo not operate the player’s controls or connect the
smartphone while driving.
CAUTION
ODo not leave your smartphone in the car. In particular, high
temperatures inside the vehicle may damage the smartphone.
NOTE
O)ROORZ WKH VSHFL

USEFUL INFORMATION
155
INFORMATION
6
No. Function
Select to switch to an audio broadcast while information
during a game is being displayed.
<0037004b004800030056004600520055004800560003004400550048000300460052005000530044005500480047000f000300440051004700030057004b004800030044004900bf004f004c0044005700480003005a004c0057004b00030057004b004800
03>
highest score is displayed in yellow.
Select to set which sports information is displayed.
6HOHFWWRVHW\RXUIDYRULWHDI

Bluetooth® SETTINGS
166
8.Select the desired item.

”Transfer (Transfer): Select to transfer contacts from
the connected cellular phone.

”
Add (Add): Select to add a new contact manually.

”
Cancel (Cancel): Select to cancel transfer.
REGISTERING A Bluetooth AUDIO DEVICE
FOR THE FIRST TIME
To use the Bluetooth Audio, it is necessary to register an
audio device with the system.
Once the player has been registered, it is possible to use
the Bluetooth Audio.
This operation cannot be performed while driving.
<00290052005500030047004800570044004c004f0056000300440045005200580057000300550048004a004c0056005700480055004c0051004a0003004400030025004f005800480057005200520057004b0003004700480059004c00460048001d000301
3a0033>
1.Turn the Bluetooth connection setting of your audio
device on.

”This function is not available when the Bluetooth
connection setting of your audio device is set to off.
2.Press the “AUDIO/TUNE” knob.

”The screen can also be displayed by selecting followed by AUDIO (AUDIO).

”If the audio control screen appears, select
Source
(Source) on the audio screen, or press the “AUDIO/
TUNE” knob again.
3.SelectBluetooth Audio (Bluetooth Audio).
4.SelectYes (Yes) to register an audio device.
5.Follow the steps in “REGISTERING A Bluetooth
'(9,&(

SETTINGS
7
Bluetooth® SETTINGS
167
PROFILES
This system supports the following services.
Bluetooth Device Spec. Function Requirements Recommendations
Bluetooth Phone/
Bluetooth Audio Device%OXHWRRWK6SHFL¿FDWLRQRegistering a Bluetooth
deviceVer. 1.1 Ver. 3.0 +EDR
Bluetooth Device3UR¿OHFunction Requirements Recommendations
Bluetooth Phone+)3+DQGV)UHH3UR

SETTINGS
7
Bluetooth® SETTINGS
169
2.SelectSETTINGS (SETTINGS).
3.SelectPhone (Phone).
4.SelectConnect Phone (Connect Phone).
XFrom the status display
1.6HOHFWVWDWXVGLVSOD\DUHDRQWKHVFUHHQ
:3
REGISTERING A Bluetooth DEVICE
Up to 5 Bluetooth devices can be registered.
Bluetooth compatible phones (HFP) and audio devices
(AVP) can be registered simultaneously.
This operation cannot be performed while driving.
1.Display the “Bluetooth Settings (Bluetooth Settings)”
VFUHHQ
:3
2.SelectAdd (Add).
XWhen another Bluetooth device is connected

”To disconnect the Bluetooth device, select
Yes
(Yes).
XWhen 5 Bluetooth devices have already been
registered

”A registered device needs to be replaced. Select
Yes (Yes), and then select the device to be
replaced.
3.When this screen is displayed, search for the device
name displayed on this screen on the screen of your
Bluetooth device.

”For details about operating the Bluetooth device, see
the manual that comes with it.

”To cancel the registration, select
Cancel (Cancel).
4.Register the Bluetooth device using your Bluetooth
device.

”A PIN-code is not required for SSP (Secure Simple
Pairing) compatible Bluetooth devices. Depending
on the type of Bluetooth device being connected, a
PHVVDJH FRQ

SETTINGS
7
Bluetooth® SETTINGS
173
No. Information
The name of the Bluetooth device. Can be changed to a
GHVLUHGQDPH
:3
Select to set the Bluetooth audio device connection
PHWKRG
:3
Device address is unique to the device and cannot be
changed.
Phone number of the Bluetooth phone.
&RPSDWLELOLW\SUR¿OHRIWKH%OXHWRRWKGHYLFH
Select to reset all setup items.
NOTE
OIf 2 Bluetooth devices have been registered with the same
device name, the devices can be distinguished referring to the
device’s address.
ODepending on the type of phone, some information may not be
displayed.
CHANGING A DEVICE NAME
1.SelectDevice Name (Device Name).
2.Enter the name and then select OK (OK).
NOTE
OEven if the device name is changed, the name registered in your
Bluetooth device does not change.
SETTING AUDIO DEVICE CONNECTION METHOD
1.SelectConnect Audio Device from (Connect Audio
Device from).
2.Select the desired connection method.

”
Vehicle (Vehicle): Select to connect the audio
system to the audio device.

”
Device (Device): Select to connect the audio device
to the audio system.

”Depending on the audio device, the “Vehicle
(Vehicle)” or “Device (Device)” connection method
may be best. As such, refer to the manual that comes
with the audio device.

”To reset the connection method, select
Default
(Default).
“System Settings (System Settings)”
SCREEN
<0037004b004800030025004f005800480057005200520057004b00030056004800570057004c0051004a00560003004600440051000300450048000300460052005100bf0055005000480047000300440051004700030046004b00440051004a0048004700
11>
1.Display the “Bluetooth Settings (Bluetooth Settings)”
VFUHHQ
:3
2.SelectSystem Settings (System Settings).

Bluetooth® SETTINGS
174
3.Select the desired item to be set.No. Information Page
Select to set Bluetooth connection on/off. 174
Displays system name. Can be changed to a
desired name.175
PIN-code used when the Bluetooth device
was registered. Can be changed to a desired
code.175
Device address is unique to the device and
cannot be changed.-
Select to set the phone connection status
display on/off.-
Select to set the connection status display of
the audio device on/off.-
&RPSDWLELOLW\SUR¿OHRIWKHV\VWHPGHYLFH-
Select to reset all setup items. -
CHANGING “Bluetooth Power (Bluetooth Power)”
1.SelectBluetooth Power (Bluetooth Power).