automatic transmission SUBARU IMPREZA 2000 2.G User Guide

7-22the p ed al, the transmission will return to the orig
inal g ear p osition.
n While climbing a grade
When d riving up a hill, und esired up shift to 4th g e ar is p revented from
taking p lac e when the ac c elerator is released . This minimizes the
c hanc e of sub seq uent d ownshifting to a lower g ear w hen ac c elerat-
ing ag ain. This p revents rep eated up shifting and d o wnshifting result-
ing in a smoother op eration of the vehic le. NOTE
The transmission may downshift to 2nd or 1st gear, depending on the way the accelerator pedal is pressed to accelerate the vehicleagain. n While going down a hill
When d esc end ing a steep hill, d ep ressing the b rake p ed al will c ause
the transmission to d ownshift to 3rd g ear, thus ap p lying eng ine b rak-
ing . Reac c eleration for a short time will c ause the transmission to up -
shift normally. NOTE In some cases, depressing the brake pedal on a downhill grade
does not result in an automatic downshift to 3rd gear. This canhappen when the automatic transmission fluid temperature is
very low, for example, during driving shortly after the vehicle has
been parked for an extended period of time. When the ATF tem-perature has risen to a certain level, automatic downshift normal-ly takes place. In the meantime, downshift manually for enginebraking as required.Also, downshifting when braking downhill will not occur at
speeds above approximately 50 mph (80 km/h). 3 (Third)
This p osition is for using eng ine b raking when g oin g d own a hill or for
c limb ing a g rad e.
The transmission automatic ally shifts into a suitab le g ear from 1st to
3rd ac c ord ing to the vehic le sp eed and the ac c elera tion you req uire.

Starting and operating7-23
–
CONTINUED –
When more ac c eleration is req uired in this p osition
, p ress the ac c eler-
ator p ed al fully to the floor and hold that p ositio n. The transmission
will automatic ally d ownshift to 2nd or 1st g ear. Wh en you release the
p ed al, the transmission will return to the orig inal g ear p osition.
2 (Second)
To shift from the “3 ” p osition, p ush the release b utton.
This p osition is for using eng ine b raking when g oin g d own a hill or for
c limb ing a steep g rad e.
In this p osition, the transmission hold s in the 2nd g ear.
Use this p osition when starting off form a stand sti ll on slip p ery road
surfac es suc h as mud or snow. It will ensure g reate r trac tion.
1 (First)
This p osition is for d riving up or d own very steep g rad es, or d riving
throug h mud or sand , or on slip p ery surfac es. In th is p osition, the
transmission hold s in the 1st g ear. Maximum speeds
WARNING
When shifting down a gear, ensure that the vehicle is not travel- ling at a speed exceeding the Maximum Allowable Speed for thegear which is about to be selected. Failure to observe this pre-caution can lead to engine over-revving and this in turn canresult in engine damage.In addition, sudden application of engine brakes when the vehicleis travelling on a slippery surface can lead to wheel locking; as a
consequence, control of the vehicle may be lost and the risk ofan accident increased.
The following tab les show the maximum sp eed s that a re p ossib le with
eac h d ifferent g ear. The tac hometer ’s (if so eq uip p ed ) need le will
enter the red area if these sp eed s are exc eed ed .
When shifting d own a g ear, it is imp ortant to c onfi rm that the c urrent
vehic le sp eed is not in exc ess of the Maximum Allow ab le Sp eed of

7-24the g ear whic h is ab out to b e selec ted .
Exc eed ing the Maximum Allowab le Sp eed s will result
in over-revving
of the eng ine. In ad d ition a p owerful eng ine b rake will eng ag e and
c ontrol of the vehic le may b e lost.
mph (km/h)
Vehicle
type2.2 liter models2 5 litertype
Gear except OUTBACK
SPORTSOUTBACKSPORTS2.5 liter
RS models
1st35 (56)35 (56)30 (49)
2nd62 (100)63 (102)57 (91)
3rd96 (155)98 (157)91 (147)
NOTE In order to prevent over-revving during acceleration of the
vehicle, the transmission will automatically shift to the next high- est gear if the Maximum Allowable Speed for the current gear isexceeded. Similarly, in order to prevent over-revving during deceleration
of the vehicle, the transmission will remain in the current gear ifthe speed of the vehicle is in excess of the Maximum AllowableSpeed for the gear to which the selector lever has been moved. Driving tips
Always ap p ly the foot or p arking b rake when the veh ic le is
stop p ed in the “D ”, “3 ”, “2 ”, “1 ”, or “R ” p osition.
Always set the p arking b rake when p arking your vehi c le. Do not
hold the vehic le with only the transmission. Do not keep the vehic le in a stationary p osition on an up hill g rad e
b y using the “D ”, “3 ”, “2 ” or “1 ” p osition. Use the b rake instead .
Shift lock release
If the selec tor lever d oes not move from the “P ” p osition with the b rake
p ed al d ep ressed and the release b utton p ushed in an d the ig nition
switc h in the “ON ” p osition, p erform the following step s:
To overrid e the shift loc k:
1. Set the p arking b rake and stop the eng ine.

Starting and operating7-29
–
CONTINUED –
c elerate the vehic le. When the ac c elerator p ed al is
released , the ve-
hic le will return to and maintain the p revious c rui sing sp eed .
To temporarily cancel the cruise control
There are four ways to c anc el the c ruise c ontrol te mp orarily:
Dep ress the b rake p ed al.
Pull the c ontrol lever in the “CANCEL ” d irec tion.
Dep ress the c lutc h p ed al (manual transmission vehic les only).
Shift the selec tor lever into the “N ” p osition (automatic transmis-
sion vehic les only).
To resume the c ruise c ontrol after it has b een temp orarily c anc eled
and with vehic le sp eed of 25 mp h (40 km/h) or more, p ush the c ontrol
lever up ward in the “ACCEL, RESUME ” d irec tion to return to the orig i-
nal c ruising sp eed automatic ally. To turn off the cruise control
There are two ways to turn off the c ruise c ontrol:
Push the main switc h ag ain.
Turn the ig nition switc h to the “ACC ” p osition (b ut only when the
vehic le is c omp letely stop p ed ).
To change the cruising speed
n To increase the speed
1. Push the c ontrol lever up ward in the “ACCEL, RESUME ” d irec tion
and hold it until the vehic le reac hes the d esired s p eed .
The c ontrol lever c an b e used for inc reasing the c r uising sp eed slig ht-
ly. Pressing the c ontrol lever up ward in the “ACCEL, RESUME ” d irec -
tion inc reases the vehic le sp eed ab out 1 mp h (1.6 k m/h). Press the
c ontrol lever rep eated ly until the d esired sp eed is reac hed .
OR
1. Dep ress the ac c elerator p ed al to ac c elerate the v ehic le to the d e-
sired sp eed .
2. Push the c ontrol lever d ownward in the “SET, COAST ” d irec tion
onc e. Now the d esired sp eed is set and the vehic le will keep running
at that sp eed without d ep ressing the ac c elerator p e d al.

Starting and operating7-31
–
CONTINUED –
CAUTION
Never drive while the parking brake is set because this will cause
unnecessary wear on the brake linings. Before starting to drive,always make sure that the parking brake has been fully released.
To set the p arking b rake, p ress the b rake p ed al fir mly and hold it d own
while fully p ulling up the p arking b rake lever.
HG0313
Release button
To release the p arking b rake, p ull the lever up sli g htly, p ress the release
b utton, then lower the lever while keep ing the b utt on p ressed .
When the p arking b rake is set while the eng ine is r unning , the p arking
b rake warning lig ht c omes on. After starting the ve hic le, b e sure that the
warning lig ht has g one out b efore the vehic le is d r iven. Refer to the “War-
ning and ind ic ator lig hts ” sec tion (c hap ter 3).
When p arking your vehic le, always set the p arking b rake firmly and p ut
the shift lever in the “1 ” (1st) for an up g rad e or “R ” (Reverse) for a d own
g rad e for manual transmission vehic les, or in the “P ” (Park) p osition for
automatic transmission vehic les.
Always set the p arking b rake firmly when p arking yo ur vehic le. Never
rely on the transmission alone to hold the vehic le.
For b etter p arking b rake p ower, d ep ress the b rake p ed al firmly while set-
ting the p arking b rake (Drum b rake only).

Starting and operating7-43
–
CONTINUED –
1. Plac e the shift lever in
“1 ” or “R ” for manual transmission vehic les,
and in “P ” for automatic transmission vehic les.
2. Use tire stop s und er the tires to p revent the veh ic le from moving .
When the vehic le is p arked in snow or when it snows , raise the wip er
b lad es off the g lass to p revent d amag e to them.
When the vehic le has b een left p arked after use on road s heavily c ov-
ered with snow, or has b een left p arked d uring a sn owstorm, ic ing
may d evelop on the b rake system, whic h c ould c ause p oor b raking
ac tion. Chec k for snow or ic e b uild up on the susp en sion, d isc b rakes
and b rake hoses und erneath the vehic le.
If there is c aked snow or ic e, remove it, b eing c ar eful not to d amag e
the d isc b rakes and b rake hoses and ABS harness. n Refueling in cold weather
To help p revent moisture from forming in the fuel s ystem and the risk
of its freezing , use of an antifreeze ad d itive in t he fuel tank is rec om-
mend ed d uring c old weather.
Use only ad d itives that are sp ec ific ally d esig ned f or this p urp ose.
When an antifreeze ad d itive is used , its effec t las ts long er if the tank is
refilled whenever the fuel level reac hes half emp ty .
If your SUBARU is not g oing to b e used for an exten d ed p eriod , it is
b est to have the fuel tank filled to c ap ac ity. Driving on snowy and icy roads
WARNING
Do not use the cruise control on slippery roads such as snowy or icy roads. This may cause loss of vehicle control.
To p revent skid d ing and slip p ing , avoid sud d en b rak ing , ab rup t ac c el-
eration, hig h-sp eed d riving , and sharp turning when d riving on snowy
or ic y road s.
Always maintain amp le d istanc e b etween your vehic le and the vehic le
ahead of you to avoid the need for sud d en b raking .
To sup p lement the foot b rake, use the eng ine b rake effec tively to c on-
trol the vehic le sp eed . (Shift into a lower g ear wh en nec essary.)

7-46Driving on snowy g rad es or ic y road s may req uire th
e use of tire c hains,
in whic h c ase p ut the c hains on the front wheels on ly. Use only SAE
c lass S typ e c hains that are of the c orrec t size fo r your tires so as not to
d amag e the vehic le b od y or susp ension.
When d riving with tire c hains, d rive at sp eed s b elo w 19 mp h (30 km/h).
When a temp orary sp are tire is on a front wheel, re p lac e the temp orary
sp are tire with the rear tire on the same sid e of t he vehic le, and then fit
c hains on the front tires.
Always use the utmost c are when d riving with tire c hains — overc onfi-
d enc e b ec ause you are d riving with tire c hains c oul d easily lead to a se-
rious ac c id ent.
Rocking the vehicle
If you must roc k the vehic le to free it from snow, sand , or mud , d ep ress
the ac c elerator p ed al slig htly and move the selec to r lever b ac k and forth
b etween “D ” and “R ” rep eated ly. Do not rac e the eng ine. For the b est
p ossib le trac tion, avoid sp inning the wheels when t rying to free the ve-
hic le.
When the road surfac e is extremely slip p ery, you c a n ob tain b etter trac -
tion b y starting the vehic le with the transmission in 2nd than 1st (b oth for
MT and AT).
Refer to the “Automatic transmission ” sec tion in this c hap ter for informa-
tion on hold ing the transmission in 2nd p osition.
Corrosion protection
Refer to the “Corrosion p rotec tion ” sec tion (c hap ter 9).

7-54c lutc h at mod erate eng ine rp m.
Avoid uneven steering , sharp turns and rap id lane c
hang es.
Slow d own b efore turning . Make a long er than normal turning rad ius
b ec ause the trailer wheels will b e c loser than the vehic le wheels to
the insid e of the turn. In a tig ht turn, the traile r c ould hit your vehic le.
Crosswind s will ad versely affec t the hand ling of yo ur vehic le and trail-
er, c ausing sway. Crosswind s c an b e d ue to weather c ond itions or the
p assing of larg e truc ks or b uses. If swaying oc c urs , firmly g rip the
steering wheel and immed iately slow d own g rad ually.
When p assing other vehic les, c onsid erab le d istanc e is req uired b e-
c ause of the ad d ed weig ht and leng th c aused b y atta c hing a trailer to
your vehic le.
Before g oing d own a steep hill, slow d own and shift into low g ear in
ord er to utilize the eng ine b raking effec t and p rev ent overheating of
your vehic le ’s b rakes. Do not make sud d en d ownshifts.
When g oing up hill on hot d ays, turn off your air c o nd itioner to red uc e
the p ossib ility of eng ine overheating c aused b y the ad d ed load of the
trailer.
Pay attention to your water temp erature g aug e.
If your vehic le has an automatic transmission, avoi d using the ac c el-
erator p ed al to stay stationary on an up hill slop e instead of using the
p arking b rake or foot b rake. This may c ause the tra nsmission fluid to
overheat.
Always b loc k the wheels und er b oth vehic le and trai ler when p arking .
Ap p ly the p arking b rake firmly. You should not p ark on a hill or slop e.
But if p arking on a hill or slop e c annot b e avoid ed , you should take
the following step s:
1. Ap p ly the b rakes and hold the p ed al d own.
2. Have someone p lac e wheel b loc ks und er b oth the ve hic le and
trailer wheels.
3. When the wheel b loc ks are in p lac e, release the r eg ular b rakes
slowly until the b loc ks ab sorb the load .

8-6mod erate sp eed . Then start the eng ine of the vehic l
e that has the d is-
c harg ed b attery.
6. When finished , c arefully d isc onnec t the c ab les in exac tly the re-
verse ord er.
Flat tires
WARNING
Do not jack up the vehicle on an incline or a loose road sur-
face. The jack can come out of the jacking point or sink into theground and this can result in a severe accident. Use only the jack provided with your vehicle. The jack sup-
plied with the vehicle is designed only for changing a tire. Neverget under the vehicle while supporting the vehicle with this jack. Always turn the engine off before raising the flat tire off the
ground using the jack. Never swing or push the vehicle sup-ported with the jack. The jack can come out of the jacking pointdue to a jolt and this can result in a severe accident. Do not use oil or grease on the wheel studs or nuts when the
spare tire is installed. This could cause the nuts to become looseand lead to an accident. Never place a tire or tire changing tools in the passenger
compartment after changing wheels. In a sudden stop or colli-
sions, loose equipment could strike occupants and cause injury.Store the tire and all tools in the proper place.
If you have a flat tire while d riving , never b rake sud d enly; keep d riving
straig ht ahead while g rad ually red uc ing sp eed . Then slowly p ull off the
road to a safe p lac e.
1. Park on a hard , level surfac e, whenever p ossib le, then stop the en-
g ine.
2. Set the p arking b rake sec urely and shift a manual transmission ve-
hic le in reverse or an automatic transmission vehic le in the “P ” (Park)
p osition.

8-12
HG0350
Indicator location mark
Tread wear indicator barHG0106
HG0349
FWD socket Spare fuse
(If your vehicle is AWD with automatic transmission) Before
driving your vehicle with the temporary spare tire, put a spare fuse inside the FWD connector in the main fuse box located inthe engine compartment and confirm that the Front-wheel drivewarning light comes on. The all wheel drive capability of the ve-
hicle has now deactivated. After re-installing the conventionaltire, remove the spare fuse from the FWD connector in order to
reactivate all wheel drive.