Maintenance and service
11-24
2. Pull out the dipstick, wipe it clean, and insert it again.
3. Pull out the dipstick again and check the oil level
on it. If it is below the lower level, add oil through thedipstick hole to bring the level up to the upper level. Recommended grade and viscosity
Each oil manufacturer has its own base oils and ad-
ditives. Never use different brands together.
Oil grade: API classification GL-5
OM-H0205
SAE viscosity No. and Applicable
Temperature Automatic transmission fluid
Checking the fluid level
The automatic transmission fluid expands largely as
its temperature rises; the fluid level differs according
to fluid temperature. Therefore, there are two differ-ent scales for checking the level of hot fluid andcold fluid on the dipstick.
Though the fluid level can be checked without
warming up the fluid on the “COLD” range, we rec-
ommend checking the fluid level when the fluid is at
operating temperature.
Checking the fluid level when the fluid is hot
Check the fluid level monthly.
1. Drive the vehicle several miles to raise the tem-
perature of the transmission fluid up to normal oper-
ating temperature; 140 to 176 °F (60 to 80 °C) is nor-
mal.
2. Park the vehicle on a level surface and set theparking brake.
3. First shift the selector lever in each position. Then shift it in the “P” position, and run the engine at id-
ling speed.