display SUBARU IMPREZA 2017 5.G Navigation Manual

BASIC INFORMATION BEFORE OPERATION
INITIAL SCREEN
INITIAL SCREEN
WARNING
lWhen the vehicle is stopped with the engine running, always apply the parking brake for safety.
1. When the ignition switch is in the “ACC” or “ON”
position, the initial screen will be displayed and the
system will begin operating.

LIST SCREEN OPERATION
The list screen can be scrolled by a swipe gesture.
For details on the operation:
WP. 36
The list screen can also be scrolled by the “TUNE/
SCROLL” knob and pressing the knob will enter it.
No.Information/Function
Select to skip to the next or previous page.
This indicates the displayed screen’s position.Faster scrolling is possible by dragging the position indicator.
No.Information/Function
Some lists contain character screen buttons which allow users to jump directly to list entries that begin with the same letter as the character screen button.Every time the same character screen button is selected, the list starting with the subsequent character is displayed.
BASIC INFORMATION BEFORE OPERATION
40
docstructure.indb 402016/10/27 15:27:36

SCREEN ADJUSTMENT
ADJUSTING BRIGHTNESS
The brightness of the screen can be adjusted. (
WP.62)
CHANGING BETWEEN DAY AND NIGHT
MODE
Depending on the position of the headlight switch, the
screen changes to day or night mode.
NOTE
l8-inch with Navi system only: Regardless of the position of the headlight switch, the screen mode can be changed. (
WP.185)
STATUS DISPLAY
The status of the Bluetooth connection, etc. is displayed on
the screen.
No. NameConditions
Screen hierarchyDisplays the screen context.
*CD indicatorThis icon is displayed when a disc has been inserted.
*
The level of Wi-Fi® reception
When Wi-Fi® function is off, no item is displayed.
BASIC INFORMATION BEFORE OPERATION
41
Basic Function
2
docstructure.indb 412016/10/27 15:27:37

No. NameConditions
The Bluetooth connection indicator
This icon is displayed when the Bluetooth connection is established.
Remaining battery charge
Low Full
The amount displayed does not always correspond with the amount displayed on the Bluetooth device.
Reception level
Poor Excellent
The level of reception does not always correspond with the level displayed on the cellular phone. The level of reception may not be displayed depending on the phone you have.
Active audio source
Select to display the active audio source information, radio frequency, and name of the artist and track currently playing, etc.
*: 8-inch with Navi system/8-inch system only
HOME SCREEN OPERATION
ADDING SHORTCUT ICONS TO THE HOME
SCREEN
Shortcut icons for various functions can be added to the
home screen when the home screen shortcut function is
turned on. (
WP.62)
1. Press .
2. Select (Add Shortcut).
3. Select the desired function.
BASIC INFORMATION BEFORE OPERATION
42
docstructure.indb 422016/10/27 15:27:38

REAR VIEW CAMERA
REAR VIEW CAMERA
A rear view camera is attached to the trunk lid or rear gate.
When the ignition switch is “ON” and the shift lever (MT
models) or select lever (CVT models) is set to “R”, the rear
view camera automatically displays the rear view image
behind the vehicle on one of the following displays.
WARNING
lSince the rear view camera uses a wide-angle lens, the image on the monitor is different from the actual view in terms of distance.
lSince the range of the image on the monitor is limited, you should always check the rear view and the surrounding area with your eyes and mirrors, and move backward at a slow speed. Moving backward only by checking the rear view image from the camera could cause an accident.
lDo not disassemble or modify the camera, switch or wiring. If smoke comes out or you smell a strange odor, stop using the rear view camera immediately. Contact your SUBARU dealer for an inspection. Continued use may result in accident,

SETTING THE CAMERA IMAGE DISPLAY TIME
The length of time that the camera image remains displayed
when the shift lever/select lever is shifted from “R” to “D”
can be set. (
WP.62)
VIEWING RANGE ON THE SCREEN
CAUTION
lThe range that can be viewed with the rear view camera is limited. Always be sure to check with your eyes when moving backward and proceed slowly.
The area from the rear end of the bumper can be viewed.
Areas at both ends of the bumper and areas just under the
bumper cannot be viewed. Also, the image from the rear
view camera looks shorter than the actual distance.
XRange of view
REAR VIEW CAMERA
46
docstructure.indb 462016/10/27 15:27:39

REAR VIEW CAMERA
49
Basic Function
2
NOTE
lIf you shift to the “R” range shortly after turning on the ignition switch, the warning message “Check Surroundings Before Backing Up” may not be displayed. Wait for several seconds or more after turning on the ignition switch before shifting to the “R” range. Then the warning message will be displayed.
DIFFERENCE BETWEEN SCREEN IMAGE AND
ACTUAL ROAD
The distance markers show the distance for a level road
when the vehicle is not loaded. It may be different from the
actual distance depending on the loading conditions or road
conditions.
XWhen there is an upward slope at the back
3 feet (1 m)

XWhen setting the Bluetooth phone/device
4. Select the desired Bluetooth phone/device.
5. Select the item to be set.
No.FunctionPage
Connecting or disconnecting Bluetooth phones/devices58
Deleting Bluetooth phones/devices60
Setting phonebook download60
Setting the automatic connection priority 61
NOTE
lThe phone settings screen can also be displayed by selecting
(Change Device) on the phone overview
screen (
WP.76) or Bluetooth audio operation screen (
WP.144).
REGISTERING A Bluetooth PHONE/DEVICE
Up to 5 Bluetooth phones/devices can be registered.
Bluetooth compatible phones (HFP) and devices (AVP) can
be registered simultaneously.
This operation cannot be performed while driving.
1. Display the phone settings screen. (
WP.55)
2. Select (Add Device).

3. When this screen is displayed, search for the device
name displayed on this screen on the screen of your
Bluetooth phone/device.

7. Check that the following pop-up screen is displayed
when the connection is complete.