set SUBARU IMPREZA 2017 5.G Navigation Manual

REAR VIEW CAMERA
REAR VIEW CAMERA
A rear view camera is attached to the trunk lid or rear gate.
When the ignition switch is “ON” and the shift lever (MT
models) or select lever (CVT models) is set to “R”, the rear
view camera automatically displays the rear view image
behind the vehicle on one of the following displays.
WARNING
lSince the rear view camera uses a wide-angle lens, the image on the monitor is different from the actual view in terms of distance.
lSince the range of the image on the monitor is limited, you should always check the rear view and the surrounding area with your eyes and mirrors, and move backward at a slow speed. Moving backward only by checking the rear view image from the camera could cause an accident.
lDo not disassemble or modify the camera, switch or wiring. If smoke comes out or you smell a strange odor, stop using the rear view camera immediately. Contact your SUBARU dealer for an inspection. Continued use may result in accident,

SETTING THE CAMERA IMAGE DISPLAY TIME
The length of time that the camera image remains displayed
when the shift lever/select lever is shifted from “R” to “D”
can be set. (
WP.62)
VIEWING RANGE ON THE SCREEN
CAUTION
lThe range that can be viewed with the rear view camera is limited. Always be sure to check with your eyes when moving backward and proceed slowly.
The area from the rear end of the bumper can be viewed.
Areas at both ends of the bumper and areas just under the
bumper cannot be viewed. Also, the image from the rear
view camera looks shorter than the actual distance.
XRange of view
REAR VIEW CAMERA
46
docstructure.indb 462016/10/27 15:27:39

51
Settings
Registering A Bluetooth Phone/Device For The First Time ProfilesBluetooth Settings Registering A Bluetooth Phone/Device Connecting Or Disconnecting Bluetooth Phone/Device Deleting Bluetooth Phones/Devices Setting Phonebook Download Setting The Automatic Connection Priority
General Settings General Settings Screen Setting The Driver Profile Setting Wi-Fi® Connection
Updating The SystemSound Settings Sound Settings ScreenVehicle Customization Vehicle Settings Screen
Bluetooth® Settings
Other Settings
52
52535556
58606061
62
62626468
7071727373
Settings
docstructure.indb 512016/10/27 15:27:40

Bluetooth® SETTINGS
REGISTERING A Bluetooth PHONE/
DEVICE FOR THE FIRST TIME
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc.
To use the hands-free system or the Bluetooth audio
system, it is necessary to register a Bluetooth phone/device
with the system.
Once the Bluetooth phone/device has been registered, it is
possible to use the hands-free system and the Bluetooth
audio system.
This operation cannot be performed while driving.
For details on registering a Bluetooth phone/device:

WP.56
1. Turn the Bluetooth connection setting of your Bluetooth
phone/device on.

Bluetooth SETTINGS
1. Press .
2. Select Settings (Settings).
3. Select Phone (Phone).
XWhen registering a Bluetooth phone/device
4. Select (Add Device).

XWhen setting the Bluetooth phone/device
4. Select the desired Bluetooth phone/device.
5. Select the item to be set.
No.FunctionPage
Connecting or disconnecting Bluetooth phones/devices58
Deleting Bluetooth phones/devices60
Setting phonebook download60
Setting the automatic connection priority 61
NOTE
lThe phone settings screen can also be displayed by selecting
(Change Device) on the phone overview
screen (
WP.76) or Bluetooth audio operation screen (
WP.144).
REGISTERING A Bluetooth PHONE/DEVICE
Up to 5 Bluetooth phones/devices can be registered.
Bluetooth compatible phones (HFP) and devices (AVP) can
be registered simultaneously.
This operation cannot be performed while driving.
1. Display the phone settings screen. (
WP.55)
2. Select (Add Device).

SETTING THE AUTOMATIC CONNECTION
PRIORITY
The automatic connection priority of the registered Bluetooth
phones/devices can be changed.
1. Display the phone settings screen. (
WP.55)
2. Select the Bluetooth phone/device to be set.
3. Select (Reorder).
4. Select next to the desired Bluetooth phone/device,
and then drag it to the desired position.
Settings
3
Bluetooth® SETTINGS
61
Settings
3
docstructure.indb 612016/10/27 15:27:44

OTHER SETTINGS
GENERAL SETTINGS
1. Press .
2. Select Settings (Settings).
3. Select General (General).
4. Select the items to be set.
GENERAL SETTINGS SCREEN
OTHER SETTINGS
62
docstructure.indb 622016/10/27 15:27:45

No.FunctionPage
Select to change the language.When
(Synchronized Language Settings) is selected, the language setting in the system is synced to the language setting in the meter cluster.
-
Select to change the unit of measure for distance.
When (Units
synchronized) is selected, the unit of measure setting in the system is synced to the unit of measure setting in the meter cluster.
-
Select to set the length of time that the camera image remains displayed when the shift lever/select lever is shifted from “R” to “D”.-
Select to update system software versions. 70
Select to turn the available new system software version check on/off.70
Select to turn the automatic downloading of updates on/off.70
Select to display the system information.-
Select to change the Bluetooth system name. -
No.FunctionPage
Select to reset all setup items.The audio system restarts automatically after resetting factory data. To complete the reset process, turn the ignition switch to the “LOCK”/“OFF” position after the audio system has restarted, and then turn to the “ACC” or “ON” position after approximately 3 minutes.
-
*2Select to automatically adjust Daylight Saving Time.-
Select to display the software license.-
*1: 8-inch with Navi system/8-inch system only
*2: Only for 8-inch with Navi system. It may be available depending on the software version.
SETTING THE DRIVER PROFILE
ADDING A NEW PROFILE
1. Display the general settings screen. (
WP.62)
2. Select (Driver Pro

SETTING Wi-Fi® CONNECTION (8-inch with
Navi system/8-inch system only)
CONNECTING OR DISCONNECTING A Wi-Fi®
NETWORK
1. Display the general settings screen. (
WP.62)
2. Select (Wi-Fi Settings).
3. Select the desired network.