check SUBARU LEGACY 1995 Service Repair Manual

B4M0492
2. FR.SS SHORT
—Faulty front right ABS sensor (Short circuit)—
DIAGNOSIS:

Faulty ABS sensor

Faulty harness and connector

Faulty ABS/TCS control module
TROUBLE SYMPTOM:

ABS and TCS do not operate.

TCS does not operate.
1. Check resistance of ABS sensor.

OK
Not OK
Replace ABS sensor.
2. Check body short of ABS sensor.

OK
Not OK
Replace ABS sensor.
3. Check body short of harness.

OK
Not OK
Repair harness/connector.
Replace ABS/TCS control module.
NOTE:
When checking ABS sensor, carefully bend or swing con-
nector and harness to check for improper contacts or open
circuits.



97
4-4bBRAKES
10. Diagnostic Chart with Select Monitor

B4M0493
E: TROUBLE CODE 22
1. FR.SS W.SPEED
—Irregular signals from front right ABS sensor—
DIAGNOSIS:

Faulty ABS sensor signal (noise, irregular signal, etc.)

Faulty harness/connector

Faulty ABS/TCS control module
TROUBLE SYMPTOM:

ABS and TCS do not operate.
1. Check ABS sensor mechanical trouble.

OK
Not OK
Repair ABS sensor/tone wheel.
2. Check ground circuit of ABS/TCS control
module.

OK
Not OK
Repair harness/connector.
3. Check resistance of ABS sensor.

OK
Not OK
Replace ABS sensor.
4. Check harness connector between ABS/TCS
control module and ABS sensor.

OK
Not OK
Repair harness/connector.
5. Check sources of signal noise.

OK
Not OK
Repair noise sources.
Replace ABS/TCS control module.





98
4-4bBRAKES
10. Diagnostic Chart with Select Monitor

B4M0494
2. FR.SS OR MV
—Irregular signals from front right ABS sensor in
decompressing mode—
DIAGNOSIS:

Faulty ABS sensor signal (noise, irregular signal, etc.)

Faulty hydraulic unit

Faulty harness/connector

Faulty ABS/TCS control module
TROUBLE SYMPTOM:

ABS does not operate.

TCS does not operate.
1. Check ABS sensor mechanical trouble.

OK
Not OK
Repair ABS sensor/tone wheel.
2. Check ground circuit of ABS/TCS control
module.

OK
Not OK
Repair harness/connector.
3. Check sources of signal noise.

OK
Not OK
Repair noise sources.
4. Check operation of hydraulic unit.

OK
Not OK
Replace hydraulic unit.
Replace ABS/TCS control module.




99
4-4bBRAKES
10. Diagnostic Chart with Select Monitor

B4M0495
3. FR.SS OVER
—Excessive speed of front right ABS sensor signal—
DIAGNOSIS:

Faulty ABS sensor signal (noise, irregular signal, etc.)

Faulty harness/connector

Faulty ABS/TCS control module
TROUBLE SYMPTOM:

ABS and TCS do not operate.
1. Check ABS sensor mechanical trouble.

OK
Not OK
Repair ABS sensor/tone wheel.
2. Check ground circuit of ABS/TCS control
module.

OK
Not OK
Repair harness/connector.
3. Check sources of signal noise.

OK
Not OK
Repair noise sources.
Replace ABS/TCS control module.



100
4-4bBRAKES
10. Diagnostic Chart with Select Monitor

B4M0511
L: TROUBLE CODE 31
FR.IN VALVE
—Faulty front right inlet solenoid valve—
DIAGNOSIS:

Faulty harness/connector

Faulty solenoid valve in hydraulic unit

Faulty ABS/TCS control module
TROUBLE SYMPTOM:

ABS and TCS do not operate.

ABS sequence control does not operate.

TCS sequence control does not operate.

Air bleeding mode does not operate.
1. Check resistance of solenoid valve.

OK
Not OK
Replace hydraulic unit.
2. Check body short of solenoid valve.

OK
Not OK
Replace hydraulic unit.
3. Check body short of harness.

OK
Not OK
Repair harness.
4. Check harness between ABS/TCS control
module and hydraulic unit.

OK
Not OK
Repair harness/connector.
Replace ABS/TCS control module.




107
4-4bBRAKES
10. Diagnostic Chart with Select Monitor

B4M0512
M: TROUBLE CODE 32
FR.OUT VALVE
—Faulty front right outlet solenoid valve—
DIAGNOSIS:

Faulty harness/connector

Faulty solenoid valve in hydraulic unit

Faulty ABS/TCS control module
TROUBLE SYMPTOM:

ABS and TCS do not operate.

ABS sequence control does not operate.

TCS sequence control does not operate.

Air bleeding mode does not operate.
1. Check resistance of solenoid valve.

OK
Not OK
Replace hydraulic unit.
2. Check body short of solenoid valve.

OK
Not OK
Replace hydraulic unit.
3. Check body short of harness.

OK
Not OK
Repair harness.
4. Check harness between ABS/TCS control
module and hydraulic unit.

OK
Not OK
Repair harness/connector.
Replace ABS/TCS control module.
B4M0513
N: TROUBLE CODE 33
FL.IN VALVE
—Faulty front left inlet solenoid valve—
DIAGNOSIS:

Faulty harness/connector

Faulty solenoid valve in hydraulic unit

Faulty ABS/TCS control module
TROUBLE SYMPTOM:

ABS and TCS do not operate.

ABS sequence control does not operate.

TCS sequence control does not operate.

Air bleeding mode does not operate.
NOTE:
The procedures used are the same as those for FR.IN
VA LV E .





108
4-4bBRAKES
10. Diagnostic Chart with Select Monitor

B4M0518
S: TROUBLE CODE 38
RL.OUT VALVE
—Faulty rear left outlet solenoid valve—
DIAGNOSIS:

Faulty harness/connector

Faulty solenoid valve in hydraulic unit

Faulty ABS/TCS control module
TROUBLE SYMPTOM:

ABS and TCS do not operate.

ABS sequence control does not operate.

TCS sequence control does not operate.

Air bleeding mode does not operate.
NOTE:
The procedures used are the same as those for FR.OUT
VA LV E .

B4M0519
T: TROUBLE CODE 41
ECU
—Faulty ABS/TCS control module—
DIAGNOSIS:

Faulty ABS/TCS control module

Faulty harness/connector
TROUBLE SYMPTOM:

ABS does not operate.

TCS does not operate.
1. Check ground circuit of ABS/TCS control
module.

OK
Not OK
Repair harness/connector.
2. Check harness connectors between power
supply generator, battery and ABS/TCS con-
trol module.

OK
Not OK
Repair harness/connector.
3. Check sources of signal noise.

OK
Not OK
Repair noise sources.
Replace ABS/TCS control module.



111
4-4bBRAKES
10. Diagnostic Chart with Select Monitor

B4M0520
U: TROUBLE CODE 42
HIGH VOLTAGE
—Source voltage is high—
DIAGNOSIS:

Power source voltage of the ABS/TCS control module is
more than 18 V.

Faulty ABS/TCS control module

Faulty harness/connector
TROUBLE SYMPTOM:

ABS does not operate.

TCS does not operate.
1. Check generator.

OK
Not OK
Repair generator.
2. Check battery terminal.

OK
Not OK
Repair battery terminal.
3. Check input voltage of ABS/TCS control mod-
ule.

OK
Not OK
Repair harness/connector.
4. Check ground circuit of ABS/TCS control
module.

OK
Not OK
Repair harness/connector.
Replace ABS/TCS control module.




11 2
4-4bBRAKES
10. Diagnostic Chart with Select Monitor

B4M0521
V: TROUBLE CODE 43
EGI LINE
—Faulty engine control module communication
cables—
DIAGNOSIS:

AET communication cable is broken or short circuited.

AEB communication cable is broken or short circuited.

AEC communication cable is broken or short circuited.

Faulty ABS/TCS control module

Faulty engine control module
TROUBLE SYMPTOM:

TCS does not operate.
1. Check communication cables.

OK

Terminal voltage
remains at 4—5.4 V.
Replace ABS/TCS control module.

Terminal voltage
remains at 10—14 V.
Go to step 2.

Terminal voltage
remains at2Vorless.
Go to step 4.
Replace ABS/TCS control module.
2. Check harness between ABS/TCS control
module and ECM.

OK
Not OK
Repair harness.
3. Check ABS/TCS control module internal
circuits.

OK
Not OK
Replace ABS/TCS control module.
Replace engine control module.
4. Check output voltage of ECM.

Not OK
OK
6. Check open circuit of harness.
OK Not OK
Replace ABS/TCS
control module.
5. Check body short of harness.

OK
Not OK
Repair harness/connector.
Replace engine control module.






11 3
4-4bBRAKES
10. Diagnostic Chart with Select Monitor

B4M0522
W: TROUBLE CODE 51
1. V.RELAY ON
—Valve relay ON malfunction—
DIAGNOSIS:

Faulty valve relay

Faulty harness/connector

Faulty ABS/TCS control module
TROUBLE SYMPTOM:

ABS does not operate.

TCS does not operate.
1. Check contact point of valve relay.

OK
Not OK
Replace valve relay.
2. Check short circuit of valve relay.

OK
Not OK
Replace valve relay.
3. Check ground circuit of valve relay.

OK
Not OK
Repair harness/connector.
4. Check body short of harness.

OK
Not OK
Repair harness.
Replace ABS/TCS control module.




11 4
4-4bBRAKES
10. Diagnostic Chart with Select Monitor