dimensions SUBARU LEGACY 1996 Service User Guide

1. Air Conditioning System
A: SPECIFICATIONS
Item Specifications
Type of air conditionerReheat air-mix type
Cooling capacity (IMACA)4.885 kW
(4,200 kcal/h, 16,666 BTU/h)
RefrigerantHFC-134a (CH
2FCF3)
[0.6 — 0.7 kg
(1.3 — 1.5 lb)]
CompressorType 5-vane rotary, fix volume (DKV-14D)
Discharge 140 cm
3(8.54 cu in)/rev
Max. permissible speed 7,000 rpm
Magnet clutchTy p eDry, single-disc type
Power consumption 45 W
Type of belt V-Ribbed 4 PK
Pulley dia. (effective dia.) 125 mm (4.92 in)
Pulley ratio1.064
CondenserType Corrugated fin (Multi-flow)
Core face area 0.215 m
2(2.31 sq ft)
Core thickness 19 mm (0.75 in)
Radiation area 4.7 m
2(51 sq ft)
Receiver drier Effective inner capacity 290 cm3(17.70 cu in)
Expansion valve TypeExternal equalizing
EvaporatorTy p eA
-laminate
Dimensions (W x H x T)74 x 224 x 235 mm
(2.91 x 8.82 x 9.25 in)
Blower fanFan typeSirocco fan
Outer diameter x width 150 x 75 mm (5.91 x 2.95 in)
Power consumption 230 W at 12 V
Condenser fan
(Sub fan)Motor typeMagnet
Power consumption 120 W at 12 V
Fan outer diameter 320 mm (12.60 in)
Radiator fan
(Main fan)Motor typeMagnet
Power consumption 120 W at 12 V
Fan outer diameter 320 mm (12.60 in)
Idling speed with
F.I.C.D. in operationMPFI model 850±100 rpm (700±100 rpm “D” range in AT model)
Dual switch
(Pressure switch)
High-pressure line
B4M0755A
Compressor relief valve
blow-out pressure
B4M0084A
Thermo control
amplifier working
temperature
(Evaporator outlet air)
B4M0756A
2
4-7SPECIFICATIONS
1. Air Conditioning System

B5M0247AB5M0248A
B5M0249A
G5M0122
3. Datum Dimensions
Use a tram tracking gauge to measure all dimensions. If a
measuring tape is used, be extremely careful because it
tends to deflect or twist, which results in a false reading.
NOTE:

A suffix character“R”or“L”refers to the right or the left.

All dimensions refer to the distance between the centers
of holes measured in a straight line.

Each dimension indicates a projected dimension
between hole centers.
14
5-1SERVICE DATA
2. Body Datum Points - 3. Datum Dimensions

B5M0247AB5M0248A
B5M0249A
G5M0122
3. Datum Dimensions
Use a tram tracking gauge to measure all dimensions. If a
measuring tape is used, be extremely careful because it
tends to deflect or twist, which results in a false reading.
NOTE:

A suffix character“R”or“L”refers to the right or the left.

All dimensions refer to the distance between the centers
of holes measured in a straight line.

Each dimension indicates a projected dimension
between hole centers.
14
5-1SERVICE DATA
2. Body Datum Points - 3. Datum Dimensions

1. FRONT STRUCTURE
B5M0320A
Unit: mm (in)
15
5-1SERVICE DATA
3. Datum Dimensions

2. CENTER STRUCTURE
Unit: mm (in)
B5M0251A
Unit: mm (in)
B5M0393A
16
5-1SERVICE DATA
3. Datum Dimensions

Unit: mm (in)
B5M0253A
17
5-1SERVICE DATA
3. Datum Dimensions

3. FRONT WINDSHIELD AND REAR WINDOW
B5M0254A
Unit: mm (in)
18
5-1SERVICE DATA
3. Datum Dimensions

4. DOORS
B5M0321A
Unit: mm (in)
19
5-1SERVICE DATA
3. Datum Dimensions

5. TRUNK LID AND REAR GATE
B5M0255A
Unit: mm (in)
20
5-1SERVICE DATA
3. Datum Dimensions

6. COMPARTMENT
B5M0256A
Unit: mm (in)
21
5-1SERVICE DATA
3. Datum Dimensions