Driving tips8-13
–
CONTINUED –
n
Wiper operation when snowing
Before d riving in c old weather, make sure the wip er b lad es are not
frozen to the wind shield or rear wind ow. If the wip er b lad es are frozen
to the wind shield or rear wind ow, use the d efroster with the airflow
c ontrol d ial in the “
” p osition and the temp erature c ontrol d ial set
for maximum warmth until the wip er b lad es are c omp l etely thawed
out. If your vehic le is eq uip p ed with a wip er d eic e r, it is help ful to thaw
the wind shield wip er b lad es. To thaw out the rear w ip er b lad e, use the
rear wind ow d efog g er.
When d riving in snow, if frozen snow starts to stic k on the surfac e of
the wind shield d esp ite wip er op eration, use the d ef roster with the air-
flow c ontrol d ial in “
” and the temp erature c ontrol d ial set for max-
imum warmth. After the wind shield g ets warmed enoug h to melt the
frozen snow on it, wash it away using the wind shiel d washer.
Snow stuc k on the wip er arm p revents the wip er from working effec -
tively. If snow is stuc k on the wip er arm, p ull off the road to a safe
p lac e, then remove it. If you stop the c ar at road sid e, use the hazard
warning flasher to alert other d rivers.
We rec ommend use of non-freezing typ e wip er b lad es d uring the sea-
sons you c ould have snow and sub -zero temp eratures. Corrosion protection
Refer to the “Corrosion p rotec tion ” sec tion (c hap ter 10).
Snow tires
WARNING
When replacing a tire, make sure you use only the same size,
circumferences, construction, brand, and load range as the origi- nal tires listed on the tire placard. Using other sizes, circumfer-
ences or construction may result in severe mechanical damageto the drive train of your vehicle and may affect ride, handling,braking, speedometer/odometer calibration, and clearancebetween the body and tires. It also may be dangerous and lead toloss of vehicle control.
