reset SUBARU LEGACY 2016 6.G Multimedia System Manual
[x] Cancel search | Manufacturer: SUBARU, Model Year: 2016, Model line: LEGACY, Model: SUBARU LEGACY 2016 6.GPages: 308, PDF Size: 11.19 MB
Page 129 of 308
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
127
PHONE
4
3. Select OK (OK).
NOTE
OThe sound quality of the voice heard from the other party’s
speaker may be negatively impacted.
OTo reset the transmit volume, select
Default (Default).
OThe volume cannot be adjusted while muted.
INCOMING CALL WAITING
When a call is interrupted by a third party while talking, this
screen is displayed.
1. Select or press the switch on the steering
wheel to start talking with the other party.
To refuse to receive the call: Select or press the
switch on the steering wheel.
”Select
or press the switch on the steering
wheel to end the current call and return to the
conversation with the party on hold.
Bluetooth PHONE MESSAGE
FUNCTION
Received messages can be forwarded from the connected
Bluetooth phone, enabling checking and replying using the
system.
Depending on the type of Bluetooth phone connected,
received messages may not be transferred to the message
inbox.
If the phone does not support the message function, this
function cannot be used.
XWithout navigation function
1. Select .
2. Select .
”The phone top screen can be displayed by pressing
the
switch on the steering wheel.
Page 133 of 308
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
131
PHONE
4
4. Select the desired message.
5. Select Send (Send).
”While the message is being sent, a sending message
screen is displayed.
EDITING QUICK REPLY MESSAGES
This operation cannot be performed while driving.
1. Select Quick Message (Quick Message).
2. Select corresponding to the desired message to
edit.
3. Select OK (OK) when editing is completed.
NOTE
OTo reset the editquick reply messages, select Default
(Default).
O“Quick Message 1” (
I'm driving right now. I will call you back later.
(I'm driving right now. I will call you back later.)*1 or
I am driving and will arrive in approximately [ETA] minutes. (I am
driving and will arrive in approximately [ETA] minutes.)*2)
cannot be edited. [ETA] will automatically be replaced with the
<004800560057004c0050004400570048004700030057004c005000480003005200490003004400550055004c00590044004f00030052005100030057004b0048000300460052005100bf00550050000300500048005600560044004a004800030056004600
5500480048005100110003>
If there are waypoints set, [ETA] to the next waypoint will be
shown.
If there is no route currently set in the navigation system, “Quick
Message 1” cannot be selected.
*1: Without navigation function
*2: With navigation function
CALLING THE MESSAGE SENDER
Calls can be made to an e-mail/SMS/MMS message
sender’s phone number.
This operation can be performed while driving.
Page 137 of 308
SETUP
135
PHONE
4
No. Function
Select to set the desired incoming e-mail tone.
Select or to adjust the incoming e-mail tone
volume.
Select or to adjust the default volume of the
other party’s voice.
Select to reset all setup items.
“Contact/Call History Settings (Contact/Call
History Settings)” SCREEN
The contact can be transferred from a Bluetooth phone
to the system. The contact also can be added, edited and
deleted.
The call history can be deleted and contact and speed dial
can be changed.
1. Display the “Phone/Message Settings (Phone/Message
6 H W W L Q J V
Page 138 of 308
SETUP
136
No. Function Page
Select to add contacts to the speed dial list. 140
Select to delete contacts from the speed dial
list.141
Select to set the transferred contact image
display on/off.-
*
Select to clear contacts from the call history. -
*
Select to add new contacts to the contact list. 137
*
Select to edit contacts in the contact list. 138
*
Select to delete contacts from the contact list. 139
Select to reset all setup items. -
*: For PBAP compatible Bluetooth phones, this function is available when
“Automatic Contact/History Transfer (Automatic Contact/History Transfer)”
L V V H W W R R I I : 3
NOTE
OContact data is managed independently for every registered
phone. When one phone is connected, another phone’s
registered data cannot be read.
UPDATE CONTACTS FROM PHONE
Operation methods differ between PBAP compatible and
OPP compatible Bluetooth phones.
If your cellular phone is neither PBAP nor OPP compatible,
the contacts cannot be transferred.
QFOR PBAP COMPATIBLE Bluetooth PHONES
1. Select Update Contacts from Phone (Update
Contacts from Phone).
”Contacts are transferred automatically.
2. & K H F N W K D W D F R Q
Page 146 of 308
SETUP
144
3. Select the desired item to be set.
No. Function
Select to change the incoming call display.
Full Screen (Full Screen): When a call is received,
the hands-free screen is displayed and can be operated
on the screen.
Drop-Down (Drop-Down): A message is displayed
on the upper side of the screen.
Select to set display of the contact/history transfer
completion message on/off.
Select to reset all setup items.
Page 155 of 308
APPS
5
ahaTM by HARMAN
153 XControl screen
No. Function
Select to display a list of preset stations.
A maximum of 35 entries can be displayed in this list.
Select to display a list of stations using the location
information.
A maximum of 10 entries can be displayed in this list.
No. Function
Select to display the audio source selection screen.
Station list
Select to display the station operation screen.
Displays station name.
Select to display the top screen.
6 H O H F W W R G L V S O D \ W K H V R X Q G V H W W L Q J V F U H H Q : 3
6 W D W L R Q R S H U D W L R Q V F U H H Q E X W W R Q V : 3
Select to change the station operation screen buttons.
Select to display the content item list.
Displays cover art.
NOTE
OWhen you switch to other modes with the aha application
activated and then turn the system Off/On with the smartphone
device still connected, the aha mode will start instead of
the last mode used. If you do not want to start the aha mode
automatically, turn off the aha application on the smartphone.
Page 156 of 308
ahaTM by HARMAN
154
NOTE
OTop 35 entries in the preset station list on the smartphone are
displayed. When there are more than 35 entries in the preset
station list, change the order of the entries in the list on the
smartphone. You can change the priority of your preset stations
within the aha application (after disconnected from this system)
to modify the station list shown on the screen. Please see your
smartphone aha application “Edit Presets” to modify this list.
O , I W K H U H D U H P X O W L S O H D X G L R
Page 174 of 308
USEFUL INFORMATION
172
RESETTING THE LIFETIME FUEL CONSUMPTION
The lifetime fuel consumption can be reset.
1. Display the “SETTINGS (SETTINGS)” screen.
: 3
2. Select Info (Info).
3. Select Eco Monitor (Eco Monitor).
4. Select Lifetime Fuel Cons Reset (Lifetime Fuel Cons
Reset).
5. Select Yes (Yes).
Page 187 of 308
SETTINGS
7
Bluetooth® SETTINGS
185
No. Information
& R P S D W L E L O L W \ S U R ¿ O H R I W K H % O X H W R R W K G H Y L F H
Select to reset all setup items.
NOTE
OIf 2 Bluetooth devices have been registered with the same
device name, the devices can be distinguished referring to the
device’s address.
ODepending on the type of phone, some information may not be
displayed.
CHANGING A DEVICE NAME
1. Select Device Name (Device Name).
2. Enter the name and then select OK (OK).
NOTE
OEven if the device name is changed, the name registered in your
Bluetooth device does not change.
SETTING AUDIO DEVICE CONNECTION METHOD
1. Select Connect Audio Device from (Connect Audio
Device from).
2. Select the desired connection method.
”
Vehicle (Vehicle): Select to connect the audio
system to the audio device.
”
Device (Device): Select to connect the audio device
to the audio system.
”Depending on the audio device, the “Vehicle
(Vehicle)” or “Device (Device)” connection method
may be best. As such, refer to the manual that comes
with the audio device.
”To reset the connection method, select
Default
(Default).
Page 188 of 308
Bluetooth® SETTINGS
186
“System Settings (System Settings)”
SCREEN
<0037004b004800030025004f005800480057005200520057004b00030056004800570057004c0051004a00560003004600440051000300450048000300460052005100bf0055005000480047000300440051004700030046004b00440051004a0048004700
11>
1. Display the “Bluetooth Settings (Bluetooth Settings)”
V F U H H Q : 3
2. Select System Settings (System Settings).
3. Select the desired item to be set.
No. Information Page
Select to set Bluetooth connection on/off. 187
Displays system name. Can be changed to a
desired name.187
PIN-code used when the Bluetooth device
was registered. Can be changed to a desired
code.187
Device address is unique to the device and
cannot be changed.-
Select to set the phone connection status
display on/off.-
Select to set the connection status display of
the audio device on/off.-
& R P S D W L E L O L W \ S U R ¿ O H R I W K H V \ V W H P G H Y L F H -
Select to reset all setup items. -