navigation SUBARU LEGACY 2016 6.G Multimedia System Manual

FUNCTION INDEX
35
1
QUICK GUIDE
XRoute guidance*
*: With navigation function
Before starting or during route guidance Page
Starting route guide 222
Editing the route 230
Viewing the entire route map 226
Adjusting route guidance volume 193
Deleting the destination 231
XUseful functions
Information Page
Displaying vehicle maintenance 196
Hands-free system (for cellular phone) Page
Registering/connecting Bluetooth phone 174
Making a call on a Bluetooth phone 118
Receiving a call on the Bluetooth phone 124
Voice recognition system Page
Operating the system with your voice 255

BASIC INFORMATION BEFORE OPERATION
38
BASIC INFORMATION BEFORE OPERATION
INITIAL SCREEN
INITIAL SCREEN
WARNING
OWhen the vehicle is stopped with the engine running, always
apply the parking brake for safety.
1. When the ignition switch is in the “ACC” or “ON”
position, the initial screen will be displayed and the
system will begin operating.

”After a few seconds, the “CAUTION (CAUTION)”
screen will be displayed.
2. Select I Agree (I Agree).

”After about 5 seconds, the “CAUTION (CAUTION)”
screen automatically switches to the next screen.

”With navigation function: Select
Language
(Language) to select a language.
XWith navigation function
3. Select Accept (Accept).

BASIC INFORMATION BEFORE OPERATION
42
CONNECTING AND
DISCONNECTING A USB MEMORY/
PORTABLE DEVICE
CONNECTING A DEVICE
1. Connect a device.
USBAUX

”Turn on the power of the device if it is not turned on.
NOTE
O&RPSDWLEOH86%PHPRU\
:3
O&RPSDWLEOHL3RG
:3
OThis unit does not support commercially available USB hubs.
OBy connecting a device such as a cellular phone, charging starts
depending on the device.
LOADING AND UNLOADING AN
SD CARD (WITH NAVIGATION
FUNCTION)
LOADING AN SD CARD
CAUTION
O3RVLWLRQ WKH 6' FDUG ZLWK WKH

BASIC INFORMATION BEFORE OPERATION
46
Operation method Outline Main use
Rotate*1
To change the
map direction,
rotate with two
¿QJHUVWRXFKLQJ
the screen.Changing the
horizontal
display angle of
the map.
*1: With navigation function
*2: The above operations may not be performed on all screens.
NOTE
OFlick operations may not be performed smoothly in high
altitudes.
TOUCH SCREEN OPERATION
This system is operated mainly by the buttons on the
screen. (Referred to as screen buttons in this manual.)

”When a screen button is touched, a beep sounds.
7KHEHHSVRXQGFDQEHWXUQHGRQRURII
:3
CAUTION
OTo prevent damaging the screen, lightly touch the screen
EXWWRQVZLWK\RXU

BASIC INFORMATION BEFORE OPERATION
50
CHARACTER JUMP BUTTONS IN LISTS
Some lists contain character screen buttons, ABC (ABC),
DEF (DEF) etc., which allow a direct jump to list entries
that begin with the same letter as the character screen
button.
1. Select the desired character jump buttons.
NOTE
OEvery time the same character screen button is selected, the list
starting with the subsequent character is displayed.
SORTING (WITH NAVIGATION FUNCTION)
The order of a list displayed on the screen can be sorted in
the order of name, distance, detour, etc.
1. Select More (More).
2. Select the desired sorting criteria.

BASIC INFORMATION BEFORE OPERATION
52 XVideo (USB video/SD video*)
*: With navigation function
Screen button Function
“Brightness
(Brightness)”
Select to darken the screen.
Select to brighten the screen.
“Contrast
(Contrast)”
Select to weaken the contrast of
the screen.
Select to strengthen the contrast of
the screen.
“Tone (Tone)”
Select to weaken the tone of the
screen.
Select to strengthen the tone of the
screen.
“Color (Color)”
R (R)Select to strengthen the red color
of the screen.
G (G)Select to strengthen the green
color of the screen.
6. Select OK (OK).
CHANGING BETWEEN DAY AND NIGHT
MODE
Depending on the position of the headlight switch, the
screen changes to day or night mode.
NOTE
OIf the screen is set to day mode with the headlight switch turned
on, this condition is memorized even with the engine turned off.

BASIC OPERATION
58
QSAVING THE SOUND QUALITY
You can save the adjusted sound quality settings.
1. Adjust the sound quality.
2. Select EQ1 (EQ1) or EQ2 (EQ2) for 2 seconds or
more.

”Values cannot be saved for
FLAT (FLAT).
QUSING A PRESET SOUND QUALITY
1. Select EQ1 (EQ1) or EQ2 (EQ2) to activate the
corresponding preset sound quality.

”To reset the sound quality, select
FLAT (FLAT).

”This function can also be used at the “EQ Settings
(EQ Settings)”.
QRESETTING THE EQ CURVE
You can return the adjusted value for the currently stored
equalizer to its initial value.
1. Select and hold FLAT (FLAT) for 2 seconds or more.

”The adjusted values for the stored
EQ1 (EQ1) and
EQ2 (EQ2) are returned to their initial values.
AUDIO SCREEN ADJUSTMENT
The screen size can be selected for each type of media.
XUSB video/SD video*
*: With navigation function
1. Select on the audio control screen.
2. Select Screen Format (Screen Format).
3. Select the desired item to be adjusted.
No. Function
Select to display a screen with either side in black.
Select to enlarge the image horizontally to full screen.
Select to enlarge the image by the same ratio
horizontally and vertically.

MEDIA OPERATION
87
AUDIO
3
SD CARD (WITH NAVIGATION
FUNCTION)
$XGLR

AUDIO/VISUAL REMOTE CONTROLS
97
AUDIO
3
Mode Operation Function
Audio CD, MP3/
WMA/AAC disc,
SD*
1,USB,iPod,
Bluetooth audioPress6HOHFWDWUDFN¿OH
Press and hold Fast forward/rewind
Pandora*
2Press
Track up (“”only)
Press and hold Thumbs up/down
List screen Press Cursor left/right
*1: With navigation function
*2: Pandora is available in the United States, Australia, and New Zealand.
XMute/enter switch
Mode Operation Function
Except list
screenPress Mute/unmute
List screen Press Select cursor entry
XBack switch
Mode Operation Function
AllPressReturn to the previous screen
when
is displayed on
the screen.
Press and holdReturn to the “HOME
(HOME)” screen
XList switch
Mode Operation Function
Audio screen,
Navigation*
screenPress Show list screen
*: With navigation function
X“Source” switch
Mode Operation Function
All Press Change audio modes
NOTE
OIn the aha, Pandora* and STARLINK mode, some operation may
be done on the screen depend on the selected APPS.
*: Pandora is available in the United States, Australia, and New Zealand.

SETUP
99
AUDIO
3
No. Function Page
Select to specify the sound settings. 56
Select to change the number of preset radio
stations/channels displayed on the screen.99
Select to specify the iPod/SD*1/USB auto play
settings on/off.-
Select to specify the iPod sound signal input
settings.100
Unsupported. -
Select to specify cover art settings on/off. -
*2Select to specify automatic sound levelizer
settings.100
Select to enable cache radio. -
Select to reset all setup items. -
*1: With navigation function
*2 <0037004b004c005600030056004800570057004c0051004a0003004600440051000300450048000300500044004700480003004700480053004800510047004c0051004a00030052005100030057004b004800030046005200510051004800460057004800
470003004400500053004f004c00bf004800550003>W\SH
DISPLAYING THE “Audio Settings (Audio
Settings)” SCREEN IN A DIFFERENT WAY
XUSB video/SD video*
*: With navigation function
1. Select on the audio control screen.
2. Select Settings (Settings).
SETTING THE NUMBER OF RADIO PRESETS
1. Display the “Audio Settings (Audio Settings)” screen.

:3
2. Select Number of Radio Presets (Number of Radio
Presets).
3. Select the button with the desired number to be
displayed.