SUBARU OUTBACK 2000 3.G Owners Manual

11-12In c hoosing an oil, you want the p rop er q uality and
visc osity, as well
as one that will ad d to fuel ec onomy. The following tab le lists the rec -
ommend ed visc osities and ap p lic ab le temp eratures.
When ad d ing oil, d ifferent b rand s may b e used tog et her as long as
they are the same API c lassific ation and SAE visc os ity as those rec -
ommend ed b y SUBARU.
Eng ine oil visc osity (thic kness) affec ts fuel ec ono my. Oils of lower vis-
c osity p rovid e b etter fuel ec onomy. However, in hot weather, oil of
hig her visc osity is req uired to p rop erly lub ric ate the eng ine.
OM-H2756
SAE viscosity numbr and applicable temperature
Recommended grade and viscosity under severe driving conditions
If the vehic le is used in d esert areas, in areas wi th very hig h temp era-
tures, or used for heavy-d uty ap p lic ations suc h as a towing a trailer,
use of oil with the following g rad e and visc osities is rec ommend ed .
API classification SJ or SH: SAE viscosity No.: 30, 40, 10W-50,
20W-40, 20W-50

Maintenance and service11-13
–
CONTINUED –
Cooling system
WARNING
Never attempt to remove the radiator cap until the engine has
been shut off and has cooled down completely. Since the coolantis under pressure, you may suffer serious burns from a spray ofboiling hot coolant when the cap is removed.
CAUTION
The cooling system has been filled at the factory with a high
quality, corrosion-inhibiting, year-around coolant which providesprotection against freezing down to –33F ( –36 C). For adding,
use genuine SUBARU coolant or an equivalent: a mixture of 50%
soft water and 50% ethylene-glycol basis coolant. Use of improp-er coolants may result in corrosion in the cooling system. It is im-portant to maintain protection against freezing and corrosion,
even if freezing temperatures are not expected. Never mix differ-ent kinds of coolant. Do not splash the engine coolant over painted parts. The alco-
hol contained in the engine coolant may damage the paint sur-face.
Hose and connections
Your vehic le emp loys an elec tric c ooling fan whic h is thermostatic ally
c ontrolled to op erate when the eng ine c oolant reac h es a sp ec ific tem-
p erature.
If the rad iator c ooling fan d oes not op erate even w hen the eng ine
c oolant temp erature g aug e exc eed s the normal op erat ing rang e, the
c ooling fan c irc uit may b e d efec tive. Chec k the fus e and rep lac e it if
nec essary. If the fuse is not b lown, have the c ooli ng system c hec ked
b y your SUBARU d ealer.
If freq uent ad d ition of c oolant is nec essary, there may b e a leak in the
eng ine c ooling system. It is rec ommend ed that the c ooling system
and c onnec tions b e c hec ked for leaks, d amag e, or lo oseness.

11-14
Engine coolant Checking the coolant level
Chec k the c oolant level at eac h fuel stop .
HBB004FB
1. Chec k the c oolant level on the outsid e of the res ervoir while the
eng ine is c ool.
2. If the level is c lose to or lower than the “LOW ” level mark, ad d
c oolant up to the “FULL ” level mark. If the reserve tank is emp ty, re-
move the rad iator c ap and refill as req uired .
HG0115
Rubber gaskets
3. After refilling the reserve tank and the rad iator , reinstall the c ap s
and c hec k that the rub b er g askets insid e the rad iat or c ap are in the
p rop er p osition.

Maintenance and service11-15
–
CONTINUED –

Changing the coolant
WARNING
Never attempt to remove the radiator cap until the engine has
been shut off and has cooled down completely. Since the coolantis under pressure, you may suffer serious burns from a spray ofboiling hot coolant when the cap is removed.
Chang e the eng ine c oolant using the following p roc e d ures ac c ord ing
to the maintenanc e sc hed ule in the “Warranty and Maintenanc e Book-
let ”.
1. Remove the und er c over.
2. Plac e a p rop er c ontainer und er the d rain p lug and loosen the d rain
p lug .
HBB006BB
3. Loosen the rad iator c ap to d rain the c oolant from the rad iator. Then
d rain the c oolant from the reserve tank. Tig hten th e d rain p lug sec ure-
ly.

11-16
HBB004FB
HBB007BB
4. Slowly p our the c oolant and fill to the rad iator filler nec k and to the
reserve tank ’s “FULL ” level mark. Do not p our the c oolant too q uic kly,
as this may lead to insuffic ient air b leed ing and t rap p ed air in the sys-
tem.
Coolant c ap ac ity: MT. 7.2 US q t (6.8 liters, 6.0 Imp q t)
AT. 7.1 US q t (6.7 liters, 5.9 Imp q t)
HG0115
Rubber gaskets
5. Put the rad iator c ap b ac k on and tig hten firmly. At this time, make
sure that the rub b er g asket in the rad iator c ap is c orrec tly in p lac e.
6. Start and run the eng ine for more than five minut es at 2,000 to
3,000 rp m.
7. Stop the eng ine and wait until the c oolant c ools d own (122 to
140 F [ 50 to 60 C] ). If there is any loss of c oolant, ad d c oolant t o the

Maintenance and service11-17
–
CONTINUED –
rad iator
’s filler nec k and to the reserve tank ’s “FULL ” level.
8. Put the rad iator c ap and reservoir c ap b ac k on an d tig hten firmly.
Air cleaner element
WARNING
Do not operate the engine with the air cleaner element removed. The air cleaner element not only filters intake air but also stops
flames if the engine backfires. If the air cleaner element is not
installed when the engine backfires, you could be burned.
The air c leaner element func tions as a filter sc ree n. When the element is
p erforated or removed , eng ine wear will b e exc essiv e and eng ine life
shortened .
The air c leaner element is a visc ous typ e. It is un nec essary to c lean or
wash the element.
Replacing the air cleaner element
Rep lac e the air c leaner element ac c ord ing to the ma intenanc e sc hed -
ule in the “Warranty and Maintenanc e Booklet ”. Und er extremely
d usty c ond itions, rep lac e it more freq uently. It is rec ommend ed that
you always use g enuine SUBARU p arts.
HBA003BB
HBA002BB
BoltAir cleaner element
1. Remove the b olt sec uring the rear air c leaner ele ment c ase.

11-182. Unsnap the three c lamp s hold ing the rear air c lea
ner element
c ase.
3. Sep arate the rear air c leaner element c ase from t he front air c lean-
er element c ase and remove the air c leaner element.
4. Clean the insid e of the front and rear air c leane r element c ases
with a d amp c loth and install a new air c leaner ele ment.
5. Insert the four p rojec tions on the rear air c lean er element c ase into
the slits on the front air c leaner element c ase and snap the three
c lamp s on the rear air c leaner element c ase and the n tig hten the b olt.
Spark plugs
CAUTION
When disconnecting the spark plug cables, always grasp the
spark plug cap, not the cables. Make sure the cables are replaced in the correct order.
HBA004BA
It may b e d iffic ult to rep lac e the sp ark p lug s. It is rec ommend ed that you
have the sp ark p lug s rep lac ed b y your SUBARU d ealer .
The sp ark p lug s should b e rep lac ed ac c ord ing to the maintenanc e
sc hed ule in the “Warranty and Maintenanc e Booklet ”.

Maintenance and service11-19
–
CONTINUED –

Recommended spark plugs
RC10YC4 (Champ ion)
RC8YC4 (Champ ion)
BKR6E-11 (NGK)
K20PR-U11 (NIPPON DENSO)
Drive belts
The alternator, p ower steering p ump , and air c ond it ioner c omp ressor d e-
p end on d rive b elts. Satisfac tory p erformanc e req ui res that b elt tension
b e c orrec t.
HGA005BB
in (mm)
Deflec tion
New b eltUsed b elt
10.28 — 0.35
(7.0 — 9.0)0.35 — 0.43
(9.0 — 11.0)
20.30 — 0.33
(7.5 — 8.5)0.35 — 0.40
(9.0 — 10.0)
To c hec k b elt tension, p lac e a straig hted g e (ruler) ac ross two ad jac ent

11-20p ulleys and ap p ly a forc e of 22 lb (98 N, 10 kg ) mi
d way b etween the
p ulleys b y using a sp ring sc ale. Belt d eflec tion sh ould b e the amount
sp ec ified . If a b elt is loose, c rac ked , or worn, c o ntac t your SUBARU
d ealer.
Manual transmission oil
Checking the oil level
Chec k the oil level monthly.
1. Park the vehic le on a level surfac e and stop the eng ine.
OM-H0210
Upper level Lower level
HBB004DB
2. Pull out the d ip stic k, wip e it c lean, and insert it ag ain.
3. Pull out the d ip stic k ag ain and c hec k the oil lev el on it. If it is b elow
the lower level, ad d oil throug h the d ip stic k hole to b ring the level up
to the up p er level. Recommended grade and viscosity
Eac h oil manufac turer has its own b ase oils and ad d itives. Never use
d ifferent b rand s tog ether.
Oil grade: API classification GL-5

Maintenance and service11-21
–
CONTINUED –
SAE viscosity No. and Applicable Temperature
OM-H0205
Automatic transmission fluid
Checking the fluid level
The automatic transmission fluid exp and s larg ely as its temp erature
rises; the fluid level d iffers ac c ord ing to fluid t emp erature. Therefore,
there are two d ifferent sc ales for c hec king the lev el of hot fluid and
c old fluid on the d ip stic k.
Thoug h the fluid level c an b e c hec ked without warmi ng up the fluid
on the “COLD ” rang e, we rec ommend c hec king the fluid level when
the fluid is at op erating temp erature. n Checking the fluid level when the fluid is hot
Chec k the fluid level monthly.
1. Drive the vehic le several miles to raise the temp erature of the
transmission fluid up to normal op erating temp eratu re; 140 to 176F
(60 to 80 C) is normal.
2. Park the vehic le on a level surfac e and set the p arking b rake.
3. First shift the selec tor lever in eac h p osition. Then shift it in the “P ”
p osition, and run the eng ine at id ling sp eed .