turn signal SUBARU OUTBACK 2001 3.G User Guide

Maintenance and service11-57
–
CONTINUED –
3. Using a Phillip s sc rewd river, remove the up p er an
d lower sc rews
that sec ure the sid e c over of the rear c omb ination lig ht assemb ly.
4. Remove the b ulb soc ket from the rear c omb ination lig ht assemb ly
b y turning it c ounterc loc kwise.
HBB048BA
HBB025BA
5. Remove the b ulb from the soc ket.
Turn signal light: Pull the b ulb out of the soc ket.
Brake/tail light: Remove the b ulb from the soc ket b y p ushing it and
turning it c ounterc loc kwise.
6. Install a new b ulb in the soc ket.
7. Set the b ulb hold er into the rear c omb ination lig ht assemb ly and
turn it c loc kwise until it loc ks.
8. Fit the rear c omb ination lig ht assemb ly into the vehic le b od y and
tig hten the nuts from the interior of the vehic le.
9. Reinstall the lig ht b ulb rep lac ement servic e hole c overs.