lumbar support SUBARU WRX 2020 Quick Guide

SEATING
Manual Seats
1Forward/Backward:Pull the lever below
the seat up and slide the seat forward or
backward. Release the lever and make
sure the seat is locked into place.
2Seat Height (Driver’s Seat):Pulling up or
pushing down on the lever will raise or
lower the seat cushion.
3Recline Seatback:Pull the lever up to
adjust the seatback to the desired
position. Release the lever and make sure
the seat is locked into place.
Power Driver’s Seat(if equipped)
1Forward/Backward and Height:Moving
the switch forward or backward will
adjust the seat in that direction. Pulling
up or pushing down on the front or back
of the switch will adjust the angle of the
seat cushion. Pulling up or pushing down
the entire switch will adjust the height of
the seat cushion.
2Recline Seatback:Moving the switch forward or backward will adjust the angle of
the seatback.
3Lumbar Support:Pressing the front of the switch will increase support. Pressing the
rear of the switch will decrease support.
GETTING COMFORTABLE
8