sensor SUBARU WRX 2020 Quick Guide

KEYLESS ACCESS WITH PUSH BUTTON START
(if equipped)
Your Subaru allows for customizing of the door unlock settings. The default setting is when
you unlock the vehicle, only the driver’s door. If preferred, you can set the vehicle to unlock
all doors. This adjustment can be performed through the Multi-Function Display (MFD). To
do this go to the “Setting” screen, push and hold the “Enter” button, next select “Car
Settings” then “Keyless Access Settings” and choose the selection you want and press
the “Enter” button.
Unlock Using Door Handles
Grip the driver’s door handle to unlock the
driver’s door (or all doors depending on the
setting). Grip the front passenger’s handle to
unlock all doors and the trunk. Two chirps will
sound and the hazard warning flashers will
flash twice.
Locking Using Door Handles
Close all doors and the trunk and touch the
door lock sensor (two lines) on either front
door handle. All doors and the trunk will lock.
One chirp will sound and the hazard warning
flashers will flash once.
Opening the Trunk
Press the trunk opener button to unlock and
open the trunk. Two chirps will sound and the
hazard warning flashers will flash twice.
ENTRY AND EXIT
5