stop start SUBARU WRX 2020 Quick Guide

ELECTRONIC PARKING BRAKE (EPB)(if equipped)
To apply the parking brake, pull up the parking
brake switch. The indicator light on the parking
brake switch will illuminate and “PARK” will
appear in the combination meter.
To release the parking brake manually, depress
the brake pedal and push the parking brake
switch down. To automatically release, gently
press the accelerator pedal with the select
lever in the “D” or “R” position. NOTE: All the
doors must be closed and your seatbelt must
be fastened.
Auto Vehicle Hold (AVH) —If Equipped (CVT Models Only)
This function automatically holds your Subaru
in place when at a complete stop, such as a
traffic signal, even after you release the brake
pedal. Press the “AVH” switch on the center
console to turn on the function each time you
start the vehicle. The indicator in the
combination meter will illuminate.
While your Subaru is being held by this
function, the operation indicator in the
combination meter will illuminate. The function
is canceled when you depress the accelerator
pedal or the brake pedal. Press the switch
again to turn it off. The function works with the
select lever in either the “D” or “R” position.
NOTE: You must have your seatbelt fastened
for this function to work.
OPERATING THE VEHICLE
28