cooler SUZUKI ALTO 2007 6.G Owners Manual

Downloaded from www.Manualslib.com manuals search engine 4976G-74E
INSTRUMENT PANEL
Description of Controls (if equipped)
Function Lever/Knob 1: This lever/knob is
used to select one of the functions
described below:
VENTILATION 2: Temperature-
controlled air comes out of the
center and side air outlets.
BI-LEVEL 3: Temperature-
controlled air comes out of the
floor outlets and cooler air comes
out of the center and side outlets.
When the temperature control
lever is in the fully “COOL”
position or fully “HOT” position,
however, the air from the floor
outlets and the air from the center
and side outlets will be the same
temperature.
HEAT 4: Temperature-controlled
air comes out of the floor outlets.
HEAT & DEFROST 5: Temp-
erature-controlled air comes out of
the floor outlets, the windscreen
defroster outlets, and the side
defroster outlets.DEFROST 6: Temperature-
controlled air comes out of the
windscreen defroster outlets and
the side defroster outlets.
Air Intake Lever/Knob 7: This lever/knob
is used to select between circulating outside
air (FRESH AIR) or recirculating inside air
(RECIRCULATED AIR).
Temperature Control Lever/Knob 8:
(if equipped) This lever /knob is used to
control the temperature of the air that
comes out of the air outlets.
Fan switch 9: This switch is used to turn
on the fan and to select fan speed. Fan
switch has different speed options:-
For Type-1 (Alto)
Four positions-OFF, LOW, MEDIUM and
HIGH.
For Type-2 (Alto / Alto K10)
Five Positions-OFF, LOW, MEDIUM LOW,
MEDIUM HIGH and HIGH.
SYSTEM OPERATING INSTRUCTIONS
5-12
76G-05-032 76G-05-031
76G-05-027
76G-05-028
76G-05-029
76G-05-030
76G-05-033
TYPE-1 (ALTO)
TYPE-2 (ALTO / ALTO K10)

Downloaded from www.Manualslib.com manuals search engine 52
76G-74E
Quick Heating (Using recirculated air)
The lever/knob settings are the same as for
normal heating except you move the air
intake lever to “RECIRCULATED AIR”. If
you use this heating method for an
extended period of time, the air in the
vehicle can become contaminated and the
windows can become misty. Therefore, use
this method only for quick heating and
change to the normal heating method as
soon as possible.
Cool Face/Warm Feet
Move the function lever/knob to “BI-LEVEL”
and the air intake lever to “FRESH AIR”,
the temperature control lever/knob to the
desired temperature position, and the fan
switch to the desired fan speed position.
Unless the temperature control lever is in
the fully “COOL” position or fully “HOT”
position, the air that comes out of the center
and side outlets will be cooler than the air
that comes out of the floor outlets.
5-15INSTRUMENT PANEL
76G-05-040
76G-05-041
TYPE-1 (ALTO)
TYPE-2 (ALTO/ALTO K10)