CD player SUZUKI ALTO 2013 7.G Owners Manual

5-13
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
Audio System (if equipped)
ALTO 800
Refer supplementary manual for audio
system (if equipped), provided along with
the vehicle.
ALTO K10
53M-07-047
Notes on Discs
Precautions
When the inside of the vehicle is very
cold and the player is used soon after
switching on the heater, condensation
may form on the disc or the optical parts
of the player and proper playback may
not be possible. If condensation forms
on the disc, wipe it off with a soft cloth. If
condensation forms on the optical parts
of the player, do not use the player forabout one hour. This will allow the con-
densation to disappear normally.
Driving on extremely bumpy roads which
cause severe vibrations may cause
sound to skip.
This unit uses a precision mechanism.
Even in the event that trouble arises,
never open the case, disassemble the
unit, or lubricate the rotating parts.
Please bring the unit to an authorized
MARUTI SUZUKI dealer.
Cautions on Handling
53M-07-048
This unit has been designed specifically for
playback of compact discs bearing mark
(A) shown above.
53M-07-049
To remove the compact disc from its stor-
age case, press down on the center of the
EXAMPLE
If you pay extended attention to oper-
ating the audio system or viewing the
audio system display while driving,
an accident can occur. If you set the
sound volume too loud, it could pre-
vent you from being aware of road
and traffic conditions.
• Keep your eyes on the road and
your mind on the drive. Avoid pay-
ing extended attention to operating
the audio system or viewing the
audio system display.
• Familiarize yourself with the audio
system controls and operation of
the audio system before driving.
• Preset your favorite radio stations
before driving so that you can
quickly tune to them using the pre-
sets.
• Set the sound volume to a level
that will allow you to continue to be
aware of road and traffic conditions
while driving.

5-27
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
Selecting a USB device mode
Press the Media Source Mode button to
select USB mode (1).
53M-07-075
Selecting a folder
Press the Folder Up button (7) to select
next folder. Press the Folder Down button
(6) select previous folder.
Selecting a track
Press the Up button (9) to listen to the
next track.
Press the Down button (8) twice to listen
to the previous track. When the Down
button (8) is pressed once, the track cur-
rently being played will start from the
beginning again.Fast forwarding/Rewinding a track
Hold down the Up button (9) to fast for-
ward the track.
Hold down the Down button (8) to fast
rewind the track.
If you keep pressing the UP (9)/DOWN
button(8) until the beginning or ending of
the disc, the unit release the fast-for-
ward/rewind operation and plays the first
track.
Scan play
File Scan
Press the SCAN button (2). The first 10
seconds of each file is play in sequence.
Folder Scan
press the SCAN button (2) for 1 second or
longer. The first 10 seconds of the first file
in each folder stored in the USB is played
in sequence.
NOTE:
To cancel the scan play, press the SCAN
button (2) again or eject the USB.
Random playback
Track random
Press the RDM button (4). the random indi-
cator “RDM” will light. The tracks in the
loaded USB device will be played in ran-
dom order.
Folder random
Press the RDM button (4) for 1 second or
longer. The random indicator “RDM and
FOLD.” will light. The tracks in the current
folder will be played in random order.
NOTE:
To cancel random playback, press the
RDM button (4) again or eject the USB.NOTICE
Do not connect any USB device other
than a USB memory or a USB audio
player. Do not connect multiple USB
devices to the USB connector using a
USB hub, etc. Supplying power to
multiple USB devices from the con-
nector could cause overheating and
smoking.

5-29
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
USB device connection
When connecting a USB device, make
sure that the connector is pushed all the
way into the port.
Do not leave the USB device for long
periods of time in places inside the vehi-
cle where the temperature can rise too
high.
Back up any important data beforehand.
We cannot accept responsibility for any
lost data.
It is recommended not to connect a USB
device that contains data files other than
MP3/WMA/AAC format.
We recommend against use of USB
devices that are non-standard shape
such as key chains, mobile phone
accessories, etc. which may damage or
stress the connection between USB
device and Socket terminal.
Always close the USB socket terminal
when not in use, since entry of foreignmaterial, dust, water, conductive liquids
may damage the audio system or USB
device.
Device such as MP3 player/Mobile
phone/digital camera may not be rec-
ognized by the audio system for playing
music.
Recording MP3/WMA/AAC
files on a USB device
Playback or display may not be possible
depending on the type of USB device in
use or the condition of the recording.
Depending on the connected USB mem-
ory, the files may be played in different
order from the order that the files were
stored.
During initialization, the reading time of
USB device may vary depending upon
factors such as file structure, size and
contents other than music files.
When files recorded contains VBR (vari-
able bit rate), during playback, fast-for-
ward or reverse operation are done.
The sound quality of MP3/WMA/AAC
files generally improves with higher bit
rate in order to achieve good sound qual-
ity recording with CBR 9continuous bit
rate) of at least 128kbps is recom-
mended.
Compression formatsMP3
MPEG 1,2 and 2.5 layer III
Bit rate
:– MPEG-1: 32, 44.1, 48 kHz
– MPEG-2: 16, 22.05, 24 kHz
– MPEG-2.5: 8, 12 kHz
– VBR
Sampling frequency:– MPEG-1: 32, 44.1, 48 kHz
– MPEG-2: 16, 22.05, 24 kHz
– MPEG-2.5: 8, 12 kHz
WMA
Supports only v7/8/9, DRM/Professional/
Loseless/Voice are not supported
Bit rate:48, 64, 80, 96, 128, 160, 192
kbps
Sampling frequency:8, 16, 22.05, 32,
44.1 kHz
AAC
MPEG AAC (Compliant with ISO/
IEC14496-12:2003 + iTunes Meta-data
Specification)
Bit rate: up to 320kbps
Sampling frequency:8/11.025/12/16/
22.05/24/32/44.1/48 kHz
Sampling frequency:8/11.025/12/16/
22.05/24/32/44.1/48 kHz
Maximum number of files/folders
Maximum number of files: 65280 (files +
folders)
Maximum number of files in a folder: 256
Maximum depth of tree structure: 8
Maximum number of folders: 255
(Root folder is included.)

5-36
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
Troubleshooting
USB
SYMPTOM CAUSEREMEDY
NO DeviceUSB device is not connectedConnect USB memory device properly.
Also check if USB connector area is
clean.
No FileThere is no playable music filesCheck data stored in USB memory
device is in supported format
Unsupported (Check 04)The USB device is not supportedCheck if data stored in USB memory
device is in supported format
Read Error (Check 04)Cannot read the file which is trying to play
by some reason. (File system, Com-
pressed setting, data format, file name
expanding, data damaged, file recorded
by others may not be supported.)Check USB memory device if connected
properly. If it's not connected properly,
reconnect, and select the file which
player is able to read and check the data
stored in USB memory. You must format
the USB memory if necessary.
Operation ErrorCannot be controlled by some reason.Switch POWER or ACC ON/OFF. If still
not recovered, remove the USB memory
device and reconnect.
Over Current (Check 05)The USB device is over the current.Use other USB memory device whose
current consumption is 1A or below. Also
check if USB connector area is clean.
Audio will be muted and skip to next
track.The file is protected with copyright
(DRM).The file protected with copyright cannot
be played. Select the playable file.

5-38
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
Error Display Messages
USB/IPod
SYMPTOM CAUSEREMEDY
CHECK 04The connected USB device is not sup-
ported.
The USB device cannot be read.Use supported USB device with properly
encoded audio files.
Check USB memory device if connected
properly. If it's not connected properly,
reconnect, and select the file which
player is able to read and check the data
stored in USB memory. You must format
the USB memory if necessary.
CHECK 05Over-current is detected.Use other USB memory device whose
current consumption is 1A or below. Also
check if USB connector area is clean.
NO DEVThe USB device/iPod is not
connected.Connect USB memory device/iPod prop-
erly. Also check if USB connector area is
clean.
NO MUSICThere is no playable music file.Check data stored in USB memory
device/iPod is in supported format.