dashboard SUZUKI ALTO 2021 Owners Manual

16
76G-74E
3-3
CAUTION
In case of attaching any metal objects
to the immobilizer key, it may not
start the engine.
The immobilizer key is a sensitive
electronic instrument. To avoid
damaging the immobilizer key:
Do not expose it to impacts,moisture or high temperature such
as by leaving it on the dashboard
under direct sunlight.
Keep the immobilizer key away from
magnetic objects.
If the Immobilizer system light (1) blinks
when the ignition switch is in the “ON”
position, there may be something wrong
with your key or with the immobilizer sys-
tem. Contact your MARUTI SUZUKI dealer
to inspect the system.
Ignition Key Reminder (if equipped)
A buzzer sounds intermittently to remind
you to remove the ignition key if it is in the
ignition switch when the driver's doors is
opened.
BEFORE DRIVING
NOTE: If you lose your Immobilizer ignition key,
contact your MARUTI SUZUKI dealer assoon as possible to have the lost onedeactivated, then have the new key
made by them.
If you own other vehicles with immobilizer keys, keep those keys awayfrom the ignition switch when using your
vehicle, or the engine may not bestarted because they may interfere withyour vehicle’s immobilizer system.
76G-03-003 76G-03-004

114
76G-74E
9-31INSPECTION AND MAINTENANCE1. HEATER 10A
2 . WIPER/WASHER 15A
3 . DOOR LOCK 20A
4 . STOP 10A
5 . TAIL 10A
6 . RADIO/DOME 15A
7 . HORN HAZARD 15A
8 . POWER STEERING 30A
9 . IG 15A
0 . TURN/BACK 10A
c . METER 10A
d . ACC 15A
e . CIGAR 15A
f . STARTER FUSE 30A
g . FUSE PULLER
h . POWER WINDOW 30A
76G-09-041A
ALTO K10
Fuse Box
The fuse boxes are located in the engine
compartment and under the driver’s side of
the dashboard.
To remove the fuse box cover under the
dashboard pull off the cover.
NOTE:AltoTo remove the fuse from the fuse box usethe fuse puller given in the fuse box (under
dashboard) as shown in the illustration.
76G-09-042
ALTO
Fuse Box (under dashboard)
76G-09-042A
ALTO K10
Fuse Box (under dashboard)
NOTE:Alto K10Replace the fuse as described on the fusebox cover. Use the fuse puller given in thefuse box and keeping cover rib (1) in
downward direction as shown.