remote start SUZUKI GRAND VITARA 2008 3.G Operating Manual

Downloaded from www.Manualslib.com manuals search engine OPERATING YOUR VEHICLE
Vehicle With Keyless Start System
63J270
The ignition switch can be operated with­
out using an ignition key when the remote controller is in an area of the vehicle other
than the rear luggage area. To turn the
ignition switch, first push in the switch.
NOTE: You must push in the ignition switch to turn
it from the "LOCK" position to the "ACC" position. To return to the "LOCK" position
from the '~CC" position, turn the ignition
switch counterclockwise while pushing in the switch.
3-5
EXAMPLE
78K103
If the keyless start system blue indicator
light illuminates on the instrument cluster, you can turn the ignition switch. If the red indicator light illuminates, you can not turn
the ignition switch.
NOTE: • The ignition switch can be turned to the '~CC" position when the keyless start
system blue indicator light illuminates.
The blue indicator light will illuminate for
several seconds when you push in the
ignition switch and then will turn off to protect the system. In this case, you
must release the ignition switch and
push it in again to illuminate the blue
indicator light.
• If the keyless start system red indicator
light illuminates, the remote controller
may not be in the vehicle or the battery
of the remote controller may be unreli­able.
NOTE: • If the battery of the remote controller
runs down or there are strong radio
waves or noise,
the operating range may
be narrower or the remote controller may
be inoperative.
• If the remote controller is too close to the door, it may not operate. • The ignition switch may not turn when the remote controller is on the instru­
ment panel, in the glove box, in a stor­
age compartment, in the sun visor or on the floor.
CAUTION
The remote controller is a sensitive electronic instrument. To avoid dam­aging the remote controller:
• Do not expose it to impacts, mois­ture or high temperature such as by leaving it on the dashboard under
direct sunlight.
• Keep the remote controller away
from magnetic objects such as a television.
You can also turn the ignition switch by inserting the ignition key into the slot.
If you leave any of the doors open with the
ignition switch in the "ACC" position for a
while (and no key inserted), the engine
may not start when you turn the ignition

Downloaded from www.Manualslib.com manuals search engine OPERATING YOUR VEHICLE
A. WARNING
(Continued) • Always return the ignition switch to the "LOCK" position and remove
the ignition key and the remote controller (if equipped) when leav­ing the vehicle even if a short time. Also do not leave children or pets alone in a parked vehicle. Unat­
tended children could cause acci­dental movement of the vehicle or could tamper with power windows or power sunroof. They also could suffer from heat stroke in warm or hot weather. These could result in
severe injury or even death.
CAUTION
• Do not use the starter motor for more than 15 seconds at a time.
For diesel engine model, do not use the starter motor for more than 30 seconds at a time. If the engine
does not start, wait 15 seconds
before trying again. If the engine
does not start after several attempts, check the fuel and igni­tion systems or consult your SUZUKI dealer.
• Do not leave the ignition switch in
the "ON" position if the engine is not running as the battery will dis­charge.
3-7
Parking Brake Lever
EXAMPLE
(1) To set (2) To release (3) To release
64J081
The parking brake lever is located between the seats. To set the parking brake, hold the brake pedal down and pull the parking
brake lever all the way up. To release the parking brake, hold the brake pedal down, pull up slightly on the parking brake lever, push the button on the end of the lever with
your thumb, and lower the lever to its origi­nal position. For
automatic transmission
vehicles,
always set the parking brake before mov­ing the gearshift lever to the "P" (PARK) position. If you park on an incline and shift
into "P" before setting the parking brake, the weight of the vehicle may make it diffi­cult to shift out of "P" when you are ready to drive the vehicle.
When preparing to drive the vehicle, move the gearshift lever out of the "P" position
before releasing the parking brake.
A. WARNING
• Never drive your vehicle with the
parking brake on: rear brake effec­
tiveness can be reduced from over­
heating, brake life may be
shortened,
or permanent brake
damage may result.
• If
the parking brake does not hold the vehicle securely or does not fully release, have your vehicle inspected immediately by an autho­
rized SUZUKI dealer.