turn signal bulb SUZUKI JIMNY 2019 Owners Manual

INSPECTION AND MAINTENANCE
0
68PH00732
1) Open the engine hood while the engine is stopped. To remove the bulb holder of the front turn signal light or the front position light (for vehicle with halogen headlights) from the light_ housing, turn the holder counterclockw1se and pull 1t out.
6-49
.(2)
Q(3)
78RB07051
(2) Removal (3) Installation
2) To remove and install the bulb of the front position light (1 ), simply pull out or push in the bulb.
Side turn signal light
78RB07031
Since the bulb is built-in type, replace ii as the light assembly. Remove the light assembly by sliding the light housing left­ward with your finger.

(2) (4)(5)
78R807037
(2) Brake/tail light (3) Rear turn signal light (4) Reversing light (5) Rear fog light (if equipped)
2) To remove the bulb holder of the above light from the light housing, turn the holder counterclockwise and pull it out.
~~~
(2) / (3) / (4) / (5)~ ,
.. (6) V'
Q(7)
78RB07038
(6) Removal (7) Installation
3) To remove and install the bulb of the brake/tail light (2), the rear turn signal light (3), the reversing light (4), or the rear fog light (5) (if equipped), simply pull out or push in the bulb.
INSPECTION AND MAINTENANCE
License plate light
52RM70070
1) Remove the cover (1) by turning it counterclockwise.
6-52

SPECIFICATION
ITEM: Lights WATTAGE BULB No.
Headlight Halogen 12V 60/55W H4
LED LED -
Front fog light (if equipped) Without daytime running 12V 19W H16 light
With daytime running light 12V35W HB
Position light (if equipped) 12V5W wsw
LED -
Daytime running light (if equipped) 12V 13W P13W
Turn signal light Front 12V 21W W21W
Rear 12V21W WY21W
Side turn signal light 12V5W -
Tail/brake light 12V 21/5W W21/5W
High mount stop light LED -
Reversing light 12V 21W W21W
License plate light 12V5W W5W
Rear fog light 12V21W W21W
Interior light Front 12V 10W -
Luggage compartment 12V8W -(if equipped)
9-5