bluetooth SUZUKI NEXA 2015 1.G User Guide
[x] Cancel search | Manufacturer: SUZUKI, Model Year: 2015, Model line: NEXA, Model: SUZUKI NEXA 2015 1.GPages: 288, PDF Size: 8.02 MB
Page 203 of 288
Downloaded from www.Manualslib.com manuals search engine
2 7 + ( 5 & 2 1 7 5 2 / 6 $ 1 ' ( 4 8 , 3 0 ( 1 7
0 6 (
5 H J L V W U D W L R Q R I D X G L R G H Y L F H V
NOTE:
• To set up a new audio player, disconnect
the phone from the unit. Connect the
phone after audio player setup is com-
pleted if necessary.
• When failed to establish the connection
within 120 seconds, the connecting
operation will be canceled. Please try
again or refer to the audio player manual
for assistance with the pairing process.
1) Press the Bluetooth
® setup button (6).
The Bluetooth
® setup menu will be dis-
played.
2) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Setup Blue-
tooth”, and press the knob (2) to deter-
mine the selection.
3) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Pairing”,
and press the knob (2) to determine the
selection.
4) Select “CAR AUDIO” from the Blue-
tooth
® menu of the audio player and
establish the pairing.
Refer to the manual of the audio player
in use for further information.
5) Enter the Passkey displayed on the unit
to the audio player.NOTE:
• When selecting “Go Back”, the previous
menu will be displayed.
• When additionally registering audio
devices, operate the same step from 1).
6 H O H F W L Q J W K H % O X H W R R W K
Š D X G L R P R G H
Press the CD button (1).
Each time the button is pressed, the mode
will change as follows: 6 H O H F W L Q J D J U R X S R Q O \ I R U V X S S R U W H G
P R G H O V
Turn the TUNE FOLDER PUSH SOUND
knob (2) to select a group. 6 H O H F W L Q J D W U D F N
• Press the Up button (3) to listen to the
next track.
• Press the Down button (4) twice to listen
to the previous track.
When the Down button (4) is pressed
once, the track currently being played
will start from the beginning again.
) D V W I R U Z D U G L Q J 5 H Z L Q G L Q J D W U D F N
• Hold down the Up button (3) to fast for-
ward the track.
• Hold down the Down button (4) to fast
rewind the track.
NOTE:
Some functions may not be available
depending on Bluetooth
® audio.
' L V S O D \ F K D Q J H
Press the DISP button (5).
Each time the button is pressed, display
will change as follows:
To use Bluetooth
® ready audio devices
with this unit, it is required to register the
devices.
CD
Bluetooth
® audio (if equipped)
AUX (if equipped)
Play time
Track name
Artist name
Album name
Page 204 of 288
Downloaded from www.Manualslib.com manuals search engine 2 7 + ( 5 & 2 1 7 5 2 / 6 $ 1 ' ( 4 8 , 3 0 ( 1 7
0 6 (
NOTE:
If text data contains more than 12 charac-
ters, the “>” mark will appear at the right
end. Holding down the DISP button (5) for
1 second or longer can display the next
page.
6 H O H F W L R Q R I D X G L R G H Y L F H 6 H O H F W $ X G L R
Follow the instructions below to select an
audio device to be paired with from the
registered audio devices.
1) Press the Bluetooth
® setup button (6).
The Bluetooth
® setup menu will be dis-
played.
2) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Setup Blue-
tooth”, and press the knob (2) to deter-
mine the selection.
3) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “List Audio”,
and press the knob (2) to determine the
selection.
4) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select an audio
device to be used, and press the knob
(2) to determine the selection.
5) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Select”, and
press the knob (2) to determine the
selection.
6) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Confirm”,
and press the knob (2) to complete the
pairing.
NOTE:
• When selecting “Go Back”, the previous
menu will be displayed.• The phone will be disconnected when the
Bluetooth
® ready audio device is
selected.
/ L V W R I D X G L R G H Y L F H V / L V W $ X G L R
Follow the instructions below to display the
names of the registered audio devices in
sequence.
1) Press the Bluetooth
® setup button (6).
The Bluetooth
® setup menu will be dis-
played.
2) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Setup Blue-
tooth”, and press the knob (2) to deter-
mine the selection.
3) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “List Audio”,
and press the knob (2) to determine the
selection. The names of registered
audio devices will be displayed in
sequence.NOTE:
When selecting “Go Back”, the previous
menu will be displayed.
3 D V V N H \ V H W W L Q J 6 H W 3 D V V N H \
Follow the instructions below to set the
security number (Passkey).
1) Press the Bluetooth
® setup button (6).
The Bluetooth
® setup menu will be dis-
played.
2) Turn the TUNE FOLDER PUSH SOUND
knob (2) to select “Setup Bluetooth”, and
press the knob (2) to determine the
selection.
3) Turn the TUNE FOLDER PUSH SOUND
knob (2) to select “Passkey”, and press
the knob (2) to determine the selection.
4) Turn the TUNE FOLDER PUSH SOUND
knob (2) to select “New Passkey”, and
press the knob (2) to determine the
selection.
5) Press or turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Confirm”.
6) Turn the TUNE FOLDER PUSH SOUND
knob (2) to select a number for the first
digit, and press the knob (2) to deter-
mine the selection. Select and deter-
mine numbers for the second, third and
fourth digits in order in the same man-
ner. When not entering up to the eighth
digit, enter blanks for the successive dig-
its.
7) Turn the TUNE FOLDER PUSH SOUND
knob (2) to determine the passkey set-
ting.
NOTE:
When selecting “Go Back”, the previous
menu will be displayed.
Page 205 of 288
Downloaded from www.Manualslib.com manuals search engine
2 7 + ( 5 & 2 1 7 5 2 / 6 $ 1 ' ( 4 8 , 3 0 ( 1 7
0 6 (
' H O H W L R Q R I D X G L R G H Y L F H L Q I R U P D W L R Q
' H O H W H $ X G L R
Follow the instructions below to delete the
registered information of audio device.
1) Press the Bluetooth
® setup button (6).
The Bluetooth
® setup menu will be dis-
played.
2) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Setup Blue-
tooth”, and press the knob (2) to deter-
mine the selection.
3) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “List Audio”,
and press the knob (2) to determine the
selection.
4) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select an audio
device to be deleted, and press the
knob (2) to determine the selection.
5) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Delete”, and
press the knob (2) to determine the
selection.
6) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Delete?”,
and press the knob (2) to determine the
selection.
7) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Confirm”,
and press the knob (2) to complete the
deletion.
NOTE:
When selecting “Go Back”, the previous
menu will be displayed.
' L V F O D L P H U I R U % O X H W R R W K
Š I X Q F W L R Q
• Depending on the mobile phone models,
some phones may not be compatible
fully or partially (some function may be
restricted).
• Connectivity or voice quality may get
affected depending on circumstances.
• After the ignition switch is turned to the
“ON” position, the audio system takes
few seconds to detect and connect to
the Bluetooth
® device (if already paired)
• Make sure that you are aware of all
applicable lock laws and accordingly use
Bluetooth
Š device.
5 H P R W H $ X G L R & R Q W U R O V
L I H T X L S S H G Controlling of basic functions of the audio
system is available using the switches on
the steering wheel. $ G M X V W L Q J W K H Y R O X P H
• To increase the volume, hold down “+” of
the VOL switch (1). The volume will keep
on being increased until the switch is
released.
• To decrease the volume, hold down “-” of
the VOL switch (1). The volume will keep
on being decreased until the switch is
released.
• To mute the sound, press the switch (2). 6 H O H F W L Q J W K H P R G HPress the switch (3).
Each time the button is pressed, the mode
will change as follows:
(2)
(3)
(1)
(4)
Page 206 of 288
Downloaded from www.Manualslib.com manuals search engine 2 7 + ( 5 & 2 1 7 5 2 / 6 $ 1 ' ( 4 8 , 3 0 ( 1 7
0 6 (
It is possible to turn on the audio system
by pressing the switch (3). 6 H O H F W L Q J W K H U D G L R V W D W L R Q ) 0 ) 0
$ 0 P R G H
• To select the next preset station, press
“ ” of the switch (4) only for a moment.
• To select the previous preset station,
press “ ” of the switch (4) only for a
moment.
• To scan a higher frequency radio station,
press “ ” of the switch (4) for 1 second
or longer.
• To scan a lower frequency radio station,
press “ ” of the switch (4) for 1 second
or longer.
6 H O H F W L Q J W K H W U D F N & ' 8 6 % L 3 R G
Š
% O X H W R R W K
Š D X G L R P R G H
• To skip to the next track, press “ ” of the
switch (4) only for a moment.
• To skip to the previous track, press “ ” of
the switch (4) twice only for a moment.
When the switch (4) is pushed down
once only for a moment, the track cur-
rently being played will start from the
beginning again.
) D V W I R U Z D U G L Q J 5 H Z L Q G L Q J D W U D F N
• To fast forward, press “ ” of the switch
(4) for 1 second or longer.
• To fast rewind, press “ ” of the switch (4)
for 1 second or longer. FM1 (Radio)
FM2 (Radio)
CD
Bluetooth
® audio (if equipped)
AUX (if equipped)
USB (iPod®) (if equipped)
AM (Radio)
<
<<<
<
<
<<
Page 211 of 288
Downloaded from www.Manualslib.com manuals search engine
2 7 + ( 5 & 2 1 7 5 2 / 6 $ 1 ' ( 4 8 , 3 0 ( 1 7
0 6 (
5 H P R W H & R Q W U R O O H U L I H T X L S S H G & R P P R Q R S H U D W L R Q V In Sound Mode
Press to adjust the sound.(bass/treble/balance/fader)
In Preset-EQ Mode
The Preset-EQ setting switches as follows:
In AVC Mode
The AVC setting switches
as follows: 7 8 1 ( ) 2 / ' ( 5 8 3 ' 2 : 1 E X W W R Q
OFF (FLAT)
JAZZ
ROCK
POP
CLASSIC
HIP-HOPOFF
LEVEL 1
LEVEL 2
LEVEL 3
/TUNE
VOL -VOL + FLD/TUNE
MODE
AS
SOUND
1
5
4
FLDENT
SEEK
TRACK
SEEK
TRACK
RPT RDM
6
MENU
3 2DISP
Power ON / OFF
3 2 : ( 5 E X W W R Q
(including at AUX mode) 9 2 / 8 0 ( E X W W R Q 0 8 7 ( E X W W R QPress to mute the sound. Press it again to cancel
the mute.follows (including at AUX mode, except while
displaying iPod
® menu):
6 2 8 1 ' E X W W R Q
Preset-EQ
BASS
TREBLE
BALANCE
FADER
AVC
The mode switches as
follows: 0 2 ' ( E X W W R Q
FM1
FM2
CD
Bluetooth
® audio
(if equipped)
AUX (if equipped)
USB (iPod®)
(if equipped)
AM
Press to adjust volume.
While playback, the sound mode switches as
Page 218 of 288
Downloaded from www.Manualslib.com manuals search engine 2 7 + ( 5 & 2 1 7 5 2 / 6 $ 1 ' ( 4 8 , 3 0 ( 1 7
0 6 (
0 3 : 0 $ $ $ &
No playbackThe disc contains unsupported formatted
data.Check the file format.
Sound skips or noise producedSound skipping may occur when playing
VBR (Variable Bit Rate) files.It is not recommended to play VBR files.
8 6 %
Playback does not start when the USB
device is connected.There is no supported format file to play
on this unit.Check the file format.
The current consumption of the USB
device exceeds 1.0 A.Use an USB device with a current con-
sumption lower than 1.0 A.
% O X H W R R W K
Š
Pairing failedThe distance between this unit and the
Bluetooth
® ready device is too far, or a
metallic object may be located between
the Bluetooth® ready device and this unit.Change the location of the Bluetooth
®
ready device.
The Bluetooth
® function of the Blue-
tooth
® ready device is off.Refer to the manual of the Bluetooth
®
ready device. (Some devices have the
power saving function that automatically
activates after a certain time.)
Unable to receive a call.Your current location may be out of ser-
vice area.Drive your vehicle to the service area of
the phone.
The voice quality of hands-free is low
(Distortion, noise etc.).Another wireless device may be located
near the unit.Switch off the wireless device or keep it
away from the unit.
3 U R E O H P
3 R V V L E O H F D X V H
3 R V V L E O H V R O X W L R Q
Page 220 of 288
Downloaded from www.Manualslib.com manuals search engine 2 7 + ( 5 & 2 1 7 5 2 / 6 $ 1 ' ( 4 8 , 3 0 ( 1 7
0 6 (
% O X H W R R W K
Š ( 5 5 2 5 The player developed an error of an
unidentified cause.Disconnect the Bluetooth
® ready device and connect it
again.
When ERROR 1 does not disappear, contact your
D X W K R U L V H G 0 D U X W L 6 X ] X N L Z R U N V K R S
) D L O H GFailed to establish pairing Try to establish the pairing again.
0 H P R U \ ) X O OReached the limit for the number of con-
nected device informationDelete information of unnecessary devices and try to
establish the pairing again.
1 R W $ Y D L O Inoperable during driving Operate the system after pulling over your vehicle.
1 R W / L Q N H GPhone is disconnected Try to establish the pairing again.
' L V S O D \
3 R V V L E O H F D X V H
3 R V V L E O H V R O X W L R Q