stop start SUZUKI NEXA 2015 1.G User Guide
[x] Cancel search | Manufacturer: SUZUKI, Model Year: 2015, Model line: NEXA, Model: SUZUKI NEXA 2015 1.GPages: 288, PDF Size: 8.02 MB
Page 126 of 288
Downloaded from www.Manualslib.com manuals search engine 2 3 ( 5 $ 7 , 1 * < 2 8 5 9 ( + , & / (
0 6 (
, I W K H U H D U Y L H Z I U R P W K H U H D U Y L H Z F D P
H U D L V Q R W V K R Z Q R U W K H U H L V D S R R U
L P D J H• If the rear view from the rearview camera
is not shown.
– Check to make sure that the ignition
switch is in the “ON” position or the
ignition mode is “ON”.
– Check to make sure that the gearshift
lever is shifted to the “R” position.• If the image from the rearview camera is
poor.– Check to make sure that the camera
lens is not dirty.
– Check to make sure that light from the
sun or the beam of the headlights from
the vehicle behind is not shining
directly into the lens.
If the rearview camera system is still not
working properly after checking the above,
have the system inspected by an
D X W K R U L V H G
0 D U X W L 6 X ] X N L Z R U N V K R S
as soon as
possible.
% U D N L Q J
60G165S
The distance needed to bring any vehicle to
a halt increases with the speed of the vehi-
cle. The braking distance needed, for exam-
ple, at 60 km/h (37 mph) will be
approximately 4 times greater than the
braking distance needed at 30 km/h (19
mph). Start to brake the vehicle when there
is plenty of distance between your vehicle
and the stopping point, and slow down
gradually.
3 R Z H U $ V V L V W H G % U D N H V L I
H T X L S S H G Your vehicle has power-assisted brakes. If
power assistance is lost due to a stalled
engine or other failures, the system is still
fully operational on reserve power and you
can bring the vehicle to a complete stop by
pressing the brake pedal once and holding
it down. The reserve power is partly used
up when you depress the brake pedal and
reduces each time the pedal is pressed.
Apply smooth and even pressure to the
pedal. Do not pump the pedal.
: $ 5 1 , 1 *
, I Z D W H U J H W V L Q W R W K H E U D N H G H Y L F H V
E U D N H S H U I R U P D Q F H P D \ E H F R P H S R R U
D Q G X Q S U H G L F W D E O H $ I W H U G U L Y L Q J
W K U R X J K Z D W H U R U Z D V K L Q J W K H X Q G H U
V L G H R I W K H Y H K L F O H W H V W W K H E U D N H V
Z K L O H G U L Y L Q J D W D V O R Z V S H H G W R V H H L I
W K H \ K D Y H P D L Q W D L Q H G W K H L U Q R U P D O
H I I H F W L Y H Q H V V , I W K H E U D N H V D U H O H V V
H I I H F W L Y H W K D Q Q R U P D O G U \ W K H P E \
G U L Y L Q J V O R Z O \ X Q W L O W K H E U D N H V K D Y H
U H J D L Q H G W K H L U Q R U P D O H I I H F W L Y H Q H V V
: $ 5 1 , 1 *
( Y H Q Z L W K R X W U H V H U Y H S R Z H U L Q W K H
E U D N H V \ V W H P \ R X F D Q V W L O O V W R S W K H
Y H K L F O H E \ S U H V V L Q J W K H E U D N H S H G D O
K D U G H U W K D Q Q R U P D O O \ U H T X L U H G + R Z
H Y H U W K H V W R S S L Q J G L V W D Q F H P D \ E H
O R Q J H U
Page 128 of 288
Downloaded from www.Manualslib.com manuals search engine 2 3 ( 5 $ 7 , 1 * < 2 8 5 9 ( + , & / (
0 6 (
+ R Z W K H $ % 6 : R U N VA computer continuously monitors wheel
speed. The computer compares the
changes in wheel speed when braking. If
the wheels slow suddenly, indicating a
skidding situation, the computer will
change braking pressure several times
each second to prevent the wheels from
locking. When you start your vehicle or
when you accelerate after a hard stop, you
may hear a momentary motor or clicking
noise as the system resets or checks
itself." This is absolutely normal and indi-
cates that ABS is functioning properly"
: $ 5 1 , 1 *
Page 131 of 288
Downloaded from www.Manualslib.com manuals search engine
' 5 , 9 , 1 * 7 , 3 6
0 6 (
54G584S
, P S U R Y L Q J ) X H O ( F R Q R P \The following instructions will help you
improve fuel economy.
$ Y R L G H [ F H V V L Y H L G O L Q J
If you are to wait for more than a minute
while you are parked, stop the engine and
start it again later. When warming up a
cold engine, allow the engine to idle until
the temperature gauge pointer comes up
to the “C” position (if the idling is not pro-
hibited). In this position, the engine is suffi-
ciently warm for starting off.
$ Y R L G I D V W V W D U W V
Fast starts away from lights or stop signs
will consume fuel unnecessarily and
shorten engine life. Start off slowly.
$ Y R L G X Q Q H F H V V D U \ V W R S V
Avoid unnecessary deceleration and stop-
ping. Try to maintain a slow, steady speed
whenever possible. Slowing down and
then accelerating again uses more fuel.
. H H S D V W H D G \ F U X L V L Q J V S H H G
Keep as constant a speed as road and
traffic conditions will permit.
. H H S Z H L J K W W R D P L Q L P X P
The heavier the load, more the fuel vehicle
consumes. Take out any luggage or cargo
when it is not necessary.
. H H S W L U H S U H V V X U H V F R U U H F W
Underinflation of the tires can waste fuel
due to increased running resistance of the
tires. Keep your tires inflated to the correct
NOTICE
7 R P L Q L P L ] H W K H S R V V L E L O L W \ R I F D W D O \ V W
R U R W K H U Y H K L F O H G D P D J H
Page 135 of 288
Downloaded from www.Manualslib.com manuals search engine
' 5 , 9 , 1 * 7 , 3 6
0 6 (
' R ¶ V D Q G ' R Q W ¶ V I R U 6 D I H
' U L Y L Q JExercise care in handling your vehicle. Be
conscious of not only your own safety but
also the safety of others on the road, and
thus enjoy the best and most comfortable
driving experience.
This section contains basic rules for safe
driving. Read it carefully for good under-
standing of the content so that you can
enjoy safe and pleasant driving in your
vehicle.
6 W D U W L Q J
1) Adjust the driver’s seat for the proper
driving posture.
2) Adjust the rear view mirror so as to
obtain the best possible rear view.
3) Before moving off, look forward and
back to confirm safety.4) Don’t start quickly, since it is dangerous
and wastes fuel.
* H Q H U D O G U L Y L Q J
1) Be sure to stop before the stop light and
stop sign. When moving into the inter-
section without any traffic lights or
signs, drive slowly to confirm safety.
72F-08-002
2) Always follow other vehicles at a safe
distance in order to prevent a rear-end
collision, in case the vehicle ahead
make a sudden stop.
3) Turn ON the turn signal at least 30
meters before making a turn or chang-
ing the lane so as not to be hit from
behind.
4) Before entering a corner, decelerate to
a safe speed. Don’t apply brakes during
cornering, or a cornering skid may
occur.5) When overtaking other vehicles, watch
out for the oncoming vehicle and care-
fully confirm the safety.
6) Don’t attempt zigzag driving which will
hinder your control over the vehicle and
cause an accident.
72F-08-011
% U D N L Q J
1) Use the parking brake when parking
your vehicle and shift the gear shift
lever into the first gear or reverse gear
position for the sake of safety.
Page 137 of 288
Downloaded from www.Manualslib.com manuals search engine
' 5 , 9 , 1 * 7 , 3 6
0 6 (
when the windshield glass is dry or the
wiper blade and glass may get dam-
aged.
72F-08-021
72F-08-022
0 D U J L Q ) R U 6 D I H W \It is important to allow yourself a margin for
safety during driving so that you can cope
with erroneous or unexpected driving of other
drivers. For that, observe the following.•Drive at a safe speed.
•Maintain a sufficient distance between
your vehicle and the vehicle ahead.
• Don’t force yourself to overtake other
vehicles.
• Don’t make quick start, hard steering or
sudden stops.
• Allow an ample time in the driving
schedule.
• Observe traffic rules and regulations. & R Q F O X V L R QA perfect driver does not exist. The
endeavour of every motorist should be to
strive for perfection. Safety consciousness
not only ensures your safety and the safety
of other road users, it also helps reduce
the wear and tear on your vehicle, prolongs
its life, gives more mileage and ensures a
comfortable driving experience.
) R O O R Z W K H G R
Page 178 of 288
Downloaded from www.Manualslib.com manuals search engine 2 7 + ( 5 & 2 1 7 5 2 / 6 $ 1 ' ( 4 8 , 3 0 ( 1 7
0 6 (
6 H O H F W L Q J W K H ) 0 E D Q G
Press the FM button (1).
Each time the button is pressed, the recep-
tion band will change as follows:
6 H O H F W L Q J W K H $ 0 E D Q G
Press the AM button (2).
6 H H N W X Q L Q J
Press the seek Up button (3) or the seek
Down button (4).
The unit stops searching for a station at a
frequency where a broadcast station is
available.
0 D Q X D O W X Q L Q J
Turn the TUNE FOLDER PUSH SOUND
knob (5).
The frequency being received is displayed. 3 U H V H W P H P R U \
1) Select the desired station.
2) Hold down a desired button ([1] to [6])
of the Preset buttons (6) to which you
want to store the station for 2 seconds
or longer. $ X W R V W R U H
Hold down the AST button (7) for 2 sec-
onds or longer.
Six stations in good reception will automat-
ically be stored to the Preset buttons (6) in
order, starting from a station whose fre-
quency is the lowest.
NOTE:
• Auto store can be released by pressing
AST button (7) while auto store is under
way.
• When the auto store is performed, the
station previously stored in the memory
at the position is overwritten.
• When there are fewer than 6 stations
that can be stored even if 1 round of
auto store operation is performed, no
station will be stored at the remaining
Preset buttons (6).
• 6 stations can be preset for FM1 and
FM2 in common, and 6 stations for AM
in auto store mode.
$ X W R V W R U H P R G H R Q R I I
Press the AST button (7).
Each time the button is pressed, the mode
is switched as follows: 5 D G L R 5 H F H S W L R Q
Radio reception can be affected by envi-
ronment, atmospheric conditions, or radio
signal’s power and distance from the sta-
tion. Nearby mountains and buildings may
interfere or deflect radio reception, causing
poor reception. Poor reception or radio
static can also be caused by electric cur-
rent from overhead wires or high voltage
power lines. FM1 FM2
AST mode on AST mode off
Page 230 of 288
Downloaded from www.Manualslib.com manuals search engine , 1 6 3 ( & 7 , 2 1 $ 1 ' 0 $ , 1 7 ( 1 $ 1 & (
0 6 (
2 L O / H Y H O & K H F N
84E012
(1) MIN
(2) MAX
(3) Engine oil dipstick
It is important to keep the engine oil at the
correct level for proper lubrication of your
vehicle’s engine. Check the oil level with
the vehicle on a level surface. The oil level
indication may be inaccurate if the vehicle
is on a slope. The oil level should be
checked either before starting the engine
or at least 5 minutes after stopping the
engine.
The handle of the engine oil dipstick is col-
ored yellow for easy identification.
Pull out the oil dipstick, wipe oil off with a
clean cloth, insert the dipstick all the way
into the engine, then remove it again. The
oil on the stick should be between the
upper and lower limits shown on the stick.
If the oil level indication is near the lowerlimit, add enough oil to raise the level to
the upper limit.
5 H I L O O L Q J
81A147
Remove the oil filler cap and pour oil slowly
through the filler hole to bring the oil level to
the upper limit on the dipstick. Be careful not
to overfill. Too much oil is almost as bad as
too little oil. After refilling, start the engine
and allow it to idle for about a minute. Stop
the engine, wait about 5 minutes and check
the oil level again.
(2) (1)(3)
NOTICE
) D L O X U H W R F K H F N W K H R L O O H Y H O U H J X O D U O \
F R X O G O H D G W R V H U L R X V H Q J L Q H W U R X E O H
G X H W R L Q V X I I L F L H Q W R L O
NOTICE
' R Q R W W R S X S W K H R L O R Y H U W K H
0 $ ; O L P L W 7 R R P X F K R L O F D X V H V
V H U L R X V H Q J L Q H W U R X E O H
Close Open
( ; $ 0 3 / (
Page 232 of 288
Downloaded from www.Manualslib.com manuals search engine , 1 6 3 ( & 7 , 2 1 $ 1 ' 0 $ , 1 7 ( 1 $ 1 & (
0 6 (
7 L J K W H Q L Q J W R U T X H I R U R L O I L O W H U
' $ ' L H V H O H Q J L Q H
1 P N J P O E I W
5 H I L O O Z L W K 2 L O D Q G & K H F N I R U / H D N V1) Pour oil through the filler hole and
install the filler cap.
For the approximate capacity of the oil,
refer to the “Capacities” item in the
“SPECIFICATIONS” section.
2) Start the engine and look carefully for
leaks at the oil filter and drain plug. Run
the engine at various speeds for at least
5 minutes.
3) Stop the engine and wait about 5 min-
utes. Check the oil level again and add
oil if necessary. Check for leaks again.
) R U ' $ $ ' L H V H O ( Q J L Q H 0 R G H OSince spec
ial procedures and tools are
requ
ired,
it is recommended that you trust
this job to your
A U T H O R I S E D - A R U T I
3 U Z U K I W O R K S H O P
( Q J L Q H & R R O D Q W 6 H O H F W L R Q R I & R R O D Q WTo m a
inta
in opt
imum performance and
durab
ility of your eng
ine, use MARUTI
Genu
ine Coolant or equ
ivalent
.
Th
is type of coolant
is best for your cool
ing
system as
it:
• Helps mainta
in proper eng
ine tempera-
ture
.
•G
ives proper protect
ion aga
inst freez
ing
and bo
iling.
•G
ives proper protect
ion aga
inst corro-
s
ion and rust
.
Failure to use the proper coolant can dam-
age your cooling system. Your D X W K R U L V H G
0 D U X W L 6 X ] X N L Z R U N V K R S can help you
select the proper coolant.
NOTICE
7 R S U H Y H Q W R L O O H D N D J H P D N H V X U H
W K D W W K H R L O I L O W H U L V W L J K W E X W G R Q R W
R Y H U W L J K W H Q L W
NOTICE
Page 246 of 288
Downloaded from www.Manualslib.com manuals search engine 7-23INSPECTION AND MAINTENANCE
64MS0-74E
*Feature not available in the vehicle.
81A283
PRIMARY FUSE
(1) – Blank
(2) 20 A Power window timer
(3) 15 A Steering lock
(4) 20 A Rear defogger(5)
20 A
Sunroof*
(6)
10 A
DRL*
(7)
10 A
Heated mirror*
(8) 7.5 A Starting signal
(9) 15 A Accessory socket 2
(10) 30 A Power window
(11) 10 A Hazard
(12) 7.5 A BCM
(13) 15 A Ignition coil
(14) 10 A ABS control module
(15) 15 A Accessory socket
(16)
10 A
A-STOP controller*
(17) 15 A Horn
(18) 10 A Stop light
(19) 10 A Air bag
(20) 10 A Back-up light
(21) 15 A Wiper / Washer
(22) 30 A Front wiper
(23) 10 A Dome light(24)
15 A
4WD*
(25)
7.5 A
RR fog lamp*
(26) – Blank
(27) 7.5 A Ignition-1 signal
(28) 15 A Radio 2
(29) 10 A Accessory socket 3
(30) 15 A Radio
(31) 10 A Tail lamp
(32) 20 A D/L
(33) 7.5 A Cruise control
(34) 10 A Meter
(35) 7.5 A Ignition-2 signal
(36)
20 A
Seat heater*
WA R N I N G
Always be sure to replace a blown
fuse with a fuse of the correct amper-
age. Never use a substitute such as
aluminum foil or wire to replace a
blown fuse. If you replace a fuse and
the new one blows in a short period of
time, you may have a major electrical
problem. Have your vehicle inspected
immediately by your D X W K R U L V H G
0 D U X W L 6 X ] X N L Z R U N V K R S.
BLOWN OK