check engine SUZUKI NEXA 2015 1.G Owner's Manual
[x] Cancel search | Manufacturer: SUZUKI, Model Year: 2015, Model line: NEXA, Model: SUZUKI NEXA 2015 1.GPages: 288, PDF Size: 8.02 MB
Page 218 of 288
Downloaded from www.Manualslib.com manuals search engine 2 7 + ( 5 & 2 1 7 5 2 / 6 $ 1 ' ( 4 8 , 3 0 ( 1 7
0 6 (
0 3 : 0 $ $ $ &
No playbackThe disc contains unsupported formatted
data.Check the file format.
Sound skips or noise producedSound skipping may occur when playing
VBR (Variable Bit Rate) files.It is not recommended to play VBR files.
8 6 %
Playback does not start when the USB
device is connected.There is no supported format file to play
on this unit.Check the file format.
The current consumption of the USB
device exceeds 1.0 A.Use an USB device with a current con-
sumption lower than 1.0 A.
% O X H W R R W K
Š
Pairing failedThe distance between this unit and the
Bluetooth
® ready device is too far, or a
metallic object may be located between
the Bluetooth® ready device and this unit.Change the location of the Bluetooth
®
ready device.
The Bluetooth
® function of the Blue-
tooth
® ready device is off.Refer to the manual of the Bluetooth
®
ready device. (Some devices have the
power saving function that automatically
activates after a certain time.)
Unable to receive a call.Your current location may be out of ser-
vice area.Drive your vehicle to the service area of
the phone.
The voice quality of hands-free is low
(Distortion, noise etc.).Another wireless device may be located
near the unit.Switch off the wireless device or keep it
away from the unit.
3 U R E O H P
3 R V V L E O H F D X V H
3 R V V L E O H V R O X W L R Q
Page 219 of 288
Downloaded from www.Manualslib.com manuals search engine
2 7 + ( 5 & 2 1 7 5 2 / 6 $ 1 ' ( 4 8 , 3 0 ( 1 7
0 6 (
( U U R U ' L V S O D \ 0 H V V D J H V
' L V S O D \
3 R V V L E O H F D X V H
3 R V V L E O H V R O X W L R Q
& '
( 5 5 2 5 The disc cannot be read.Insert the disc with its label side up.
Check the disc if it is not warped or is free of flaws. When
ERROR 1 does not disappear even when a normal disc is
inserted, contact your D X W K R U L V H G 0 D U X W L 6 X ] X N L Z R U N V K R S
( 5 5 2 5 The player developed an error of an
unidentified cause.When the CD is in the unit, press the CD eject button to
remove the disc.
When the disc cannot be ejected, contact your D X W K R U L V H G
0 D U X W L 6 X ] X N L Z R U N V K R S
8 6 % L 3 R G
Š ( 5 5 2 5 The USB device is disconnected. Check the connection of the USB device.
( 5 5 2 5 Impossible to communicate correctly with
the USB device.Unplug the USB device and plug it again.
Check the USB device.
( 5 5 2 5 Inoperable due to an unidentified cause.Unplug the USB device and plug it again.
When ERROR 3 does not disappear, contact
your D X W K R U L V H G 0 D U X W L 6 X ] X N L Z R U N V K R S
( 5 5 2 5 The current consumption of the USB
device exceeds 1.0 A.Check the USB device.
Page 228 of 288
Downloaded from www.Manualslib.com manuals search engine 7-5INSPECTION AND MAINTENANCE
64MS0-74E
Interval: This interval should be judged by odometer reading
or months, whichever comes first.
FREE INSPECTION
PERIODIC MAINTENANCE AT COST
km (x1000)
1
5
10
20
30
40
50
60
70
80
months
1
6
12
24
36
48
60
72
84
96
ROAD TEST11-1.
Operation of Brakes, gear shifting and speedometer
I
I
I
I
I
I
I
I
I
I
11-2.
Body and chassis noise
I
I
I
I
I
I
I
I
I
I
AIR CONDITIONER
12-1.
Check belt tension
I
I
I
I
I
I
I
I
I
I
12-2. Tighten compressor mounting bolt – T T T T T T T T T
12-3.
All hose joint (Check, tighten)
I
I
I
I
I
I
I
I
I
I
12-4.Check fun ctioning of R E C I R C U L A T I N G flap I I I I I I I I I I
12-5.
Clean condenser with low pressure water
–
C
C
C
C
C
C
C
C
C
12-6.Check belt for frayed edges I I I I I I I I I I
12-7.
Check all mounting bolts
I
I
I
I
I
I
I
I
I
I
12-8. Air conditioner filter element I I I I R I I R I I
Page 230 of 288
Downloaded from www.Manualslib.com manuals search engine , 1 6 3 ( & 7 , 2 1 $ 1 ' 0 $ , 1 7 ( 1 $ 1 & (
0 6 (
2 L O / H Y H O & K H F N
84E012
(1) MIN
(2) MAX
(3) Engine oil dipstick
It is important to keep the engine oil at the
correct level for proper lubrication of your
vehicle’s engine. Check the oil level with
the vehicle on a level surface. The oil level
indication may be inaccurate if the vehicle
is on a slope. The oil level should be
checked either before starting the engine
or at least 5 minutes after stopping the
engine.
The handle of the engine oil dipstick is col-
ored yellow for easy identification.
Pull out the oil dipstick, wipe oil off with a
clean cloth, insert the dipstick all the way
into the engine, then remove it again. The
oil on the stick should be between the
upper and lower limits shown on the stick.
If the oil level indication is near the lowerlimit, add enough oil to raise the level to
the upper limit.
5 H I L O O L Q J
81A147
Remove the oil filler cap and pour oil slowly
through the filler hole to bring the oil level to
the upper limit on the dipstick. Be careful not
to overfill. Too much oil is almost as bad as
too little oil. After refilling, start the engine
and allow it to idle for about a minute. Stop
the engine, wait about 5 minutes and check
the oil level again.
(2) (1)(3)
NOTICE
) D L O X U H W R F K H F N W K H R L O O H Y H O U H J X O D U O \
F R X O G O H D G W R V H U L R X V H Q J L Q H W U R X E O H
G X H W R L Q V X I I L F L H Q W R L O
NOTICE
' R Q R W W R S X S W K H R L O R Y H U W K H
0 $ ; O L P L W 7 R R P X F K R L O F D X V H V
V H U L R X V H Q J L Q H W U R X E O H
Close Open
( ; $ 0 3 / (
Page 232 of 288
Downloaded from www.Manualslib.com manuals search engine , 1 6 3 ( & 7 , 2 1 $ 1 ' 0 $ , 1 7 ( 1 $ 1 & (
0 6 (
7 L J K W H Q L Q J W R U T X H I R U R L O I L O W H U
' $ ' L H V H O H Q J L Q H
1 P N J P O E I W
5 H I L O O Z L W K 2 L O D Q G & K H F N I R U / H D N V1) Pour oil through the filler hole and
install the filler cap.
For the approximate capacity of the oil,
refer to the “Capacities” item in the
“SPECIFICATIONS” section.
2) Start the engine and look carefully for
leaks at the oil filter and drain plug. Run
the engine at various speeds for at least
5 minutes.
3) Stop the engine and wait about 5 min-
utes. Check the oil level again and add
oil if necessary. Check for leaks again.
) R U ' $ $ ' L H V H O ( Q J L Q H 0 R G H OSince spec
ial procedures and tools are
requ
ired,
it is recommended that you trust
this job to your
A U T H O R I S E D - A R U T I
3 U Z U K I W O R K S H O P
( Q J L Q H & R R O D Q W 6 H O H F W L R Q R I & R R O D Q WTo m a
inta
in opt
imum performance and
durab
ility of your eng
ine, use MARUTI
Genu
ine Coolant or equ
ivalent
.
Th
is type of coolant
is best for your cool
ing
system as
it:
• Helps mainta
in proper eng
ine tempera-
ture
.
•G
ives proper protect
ion aga
inst freez
ing
and bo
iling.
•G
ives proper protect
ion aga
inst corro-
s
ion and rust
.
Failure to use the proper coolant can dam-
age your cooling system. Your D X W K R U L V H G
0 D U X W L 6 X ] X N L Z R U N V K R S can help you
select the proper coolant.
NOTICE
7 R S U H Y H Q W R L O O H D N D J H P D N H V X U H
W K D W W K H R L O I L O W H U L V W L J K W E X W G R Q R W
R Y H U W L J K W H Q L W
NOTICE
Page 233 of 288
Downloaded from www.Manualslib.com manuals search engine
, 1 6 3 ( & 7 , 2 1 $ 1 ' 0 $ , 1 7 ( 1 $ 1 & (
0 6 (
& R R O D Q W / H Y H O & K H F NCheck the coolant level at the reservoir
tank, not at the radiator. With the engine
cool, the coolant level should be between
the “FULL” and “LOW” marks. $ G G L Q J & R R O D Q W
61MM0A125
NOTICE
7 R D Y R L G G D P D J L Q J \ R X U F R R O L Q J V \ V
W H P
Page 236 of 288
Downloaded from www.Manualslib.com manuals search engine , 1 6 3 ( & 7 , 2 1 $ 1 ' 0 $ , 1 7 ( 1 $ 1 & (
0 6 (
& O X W F K 3 H G D O ) O X L G & R Q W U R O & O X W F K
64MS141
Check the clutch pedal for smooth opera-
tion and clutch fluid level from time to time.
If clutch dragging is felt with the pedal fully
depressed, have the clutch inspected by
D X W K R U L V H G 0 D U X W L 6 X ] X N L Z R U N V K R S. If the
clutch fluid level is near the “MIN” triangle
mark, fill it up to the “MAX” triangle mark
with MARUTI genuine brake fluid.
) X H O ) L O W H U
64MS175
The fuel filter works as a water sedimentor
as well.
Drain water according to the Periodic
Maintenance Schedule. To drain water:
1) Place a pan or ample rag under the fuel
filter drain nozzle.
2) Loosen the drain screw (1). The water
will be drained.
3) Tighten the drain screw when the water
changes to the diesel fuel.
7 L J K W H Q L Q J W R U T X H I R U G U D L Q V F U H Z
1 P N J P O E I W
% U D N H V % U D N H ) O X L G
64MS141
Check the brake fluid level by looking at
the reservoir in the engine compartment.
Check that the fluid level is between the
“MAX” and “MIN” triangle mark. If the
brake fluid level is near the “MIN” triangle
mark, fill it up to the “MAX” triangle mark
with MARUTI GENUINE BRAKE FLUID.
MAX
MIN
(1)
( ; $ 0 3 / (
MAX
MIN
Page 237 of 288
Downloaded from www.Manualslib.com manuals search engine
, 1 6 3 ( & 7 , 2 1 $ 1 ' 0 $ , 1 7 ( 1 $ 1 & (
0 6 (
NOTE:With disc brakes, the fluid level can be
expected to gradually fall as the brake pads
wear. % U D N H 3 H G D OCheck if the brake pedal stops at the regular
height without spongy feeling when you
depress it. If not, have the brake system
inspected by your D X W K R U L V H G 0 D U X W L 6 X ] X N L
Z R U N V K R S. If you doubt the brake pedal for
the regular height, check it as follows:
54G108
3 H G D O W R I O R R U F D U S H W P L Q L P X P G L V
W D Q F H ³ D ´ P P L Q With the engine running, measure the dis-
tance between the brake pedal and floor
carpet when the pedal is depressed with
approximately 30 kg (66 lbs) of force. The
minimum distance required is as specified.
Since your vehicle’s brake system is self-
adjusting, there is no need for pedal adjust-
ment.
If the pedal to floor carpet distance as mea-
sured above is less than the minimum dis-
tance required, have your vehicle inspected
by your D X W K R U L V H G 0 D U X W L 6 X ] X N L Z R U N V K R S.NOTE:When measuring the distance between the
brake pedal and floor wall, be sure not to
include the floor mat or rubber on the floor
wall in your measurement.
: $ 5 1 , 1 *
) D L O X U H W R I R O O R Z W K H J X L G H O L Q H V E H O R Z
F D Q U H V X O W L Q S H U V R Q D O L Q M X U \ R U V H U L
R X V G D P D J H W R W K H E U D N H V \ V W H P
Page 239 of 288
Downloaded from www.Manualslib.com manuals search engine
, 1 6 3 ( & 7 , 2 1 $ 1 ' 0 $ , 1 7 ( 1 $ 1 & (
0 6 (
7 L U H V
74LHT0704
The front and rear tire pressure specifica-
tions for your vehicle are listed on the Tire
Information Label. Both the front and rear
tires should have the specified tire pressure.
Note that the value does not apply to the
spare tire, if equipped.
7 L U H , Q V S H F W L R QInspect your vehicle’s tires at least once a
month by performing the following checks:1) Measure the tire pressure with a tire
gauge. Adjust the pressure if necessary.
Remember to check the spare tire, too.
54G136
(1) Tread wear indicator
(2) Indicator location mark2) Check that the depth of the tread groove
is more than 1.6 mm (0.06 in.). To help
you check this, the tires have molded-in
tread wear indicators in the grooves.
When the indicators appear on the tread
surface, the remaining depth of the tread
is 1.6 mm (0.06 in.) or less and the tire
should be replaced.
3)Check for abnormal wear, cracks and
damage. Any tires with cracks or other
damage should be replaced. If any tires
show abnormal wear, have them
inspected by your
D X W K R U L V H G 0 D U X W L
6 X ] X N L Z R U N V K R S
.
( ; $ 0 3 / (
: $ 5 1 , 1 *
Page 240 of 288
Downloaded from www.Manualslib.com manuals search engine , 1 6 3 ( & 7 , 2 1 $ 1 ' 0 $ , 1 7 ( 1 $ 1 & (
0 6 (
4) Check for loose wheel nuts.
5) Check that there are no nails, stones or
other objects sticking into the tires.
7 L U H 5 R W D W L R Q W L U H U R W D W L R Q
80JK040
If your vehicle is equipped with a spare tire
which is a different wheel type than the
wheels on the vehicle, you must use a 4-
tire rotation as shown in the example
below.
W L U H U R W D W L R Q
54G114
To avoid uneven wear of your tires and to
prolong their life, rotate the tires as illus-
trated. Tires should be rotated every 10000
km (6000 miles). After rotation, adjust front
and rear tire pressures to the specification
listed on your vehicle’s Tire Information
Label.
& $ 8 7 , 2 1
+ L W W L Q J F X U E V D Q G U X Q Q L Q J R Y H U U R F N V
F D Q G D P D J H W L U H V D Q G D I I H F W Z K H H O
D O L J Q P H Q W % H V X U H W R K D Y H W L U H V D Q G
Z K H H O D O L J Q P H Q W F K H F N H G S H U L R G L
F D O O \ E \ \ R X U D X W K R U L V H G 0 D U X W L
6 X ] X N L Z R U N V K R S
: $ 5 1 , 1 *