mirror SUZUKI NEXA 2015 1.G Owners Manual
[x] Cancel search | Manufacturer: SUZUKI, Model Year: 2015, Model line: NEXA, Model: SUZUKI NEXA 2015 1.GPages: 288, PDF Size: 8.02 MB
Page 39 of 288
Downloaded from www.Manualslib.com manuals search engine
% ( ) 2 5 ( ' 5 , 9 , 1 *
0 6 (
NOTE:
Even if you cannot close the window by the
auto-up feature because there may be
something wrong with the pinching preven-
tion function, you can close the window by
holding the window switch in the up posi-
tion.If you drive in extreme off-road condition,
the pinching prevention function may oper-
ate accidentally because the window react
to vehicle jolting. 7 K H 3 L Q F K L Q J 3 U H Y H Q W L R Q ) X Q F W L R Q , Q L
W L D O L ] D W L R QWhen you disconnect and re-connect the
battery or replace the fuse, the function will
be deactivated. In this condition, the auto-
down feature will be deactivated, while the
auto-up feature may remain being activated.
The pinching prevention function needs to
be initialized.To initialize the pinching prevention func-
tion, use the following procedure:
1) Turn the ignition switch to the “ON”
position or press the engine switch to
change the ignition mode to “ON”.
2) Open the driver’s window fully by hold-
ing the window switch in the “DOWN”
position.3) Close the driver’s window by holding the
switch in the “UP” position, and keep
holding the switch for 2 seconds after the
window fully closed.4) Check the driver’s window if the auto-
down/up feature work.If the auto-down/up feature would not work
after initialization, there might be some-
thing wrong with the pinching prevention
function. Have your vehicle inspected by
an D X W K R U L V H G 0 D U X W L 6 X ] X N L Z R U N V K R S.
0 L U U R U V , Q V L G H 5 H D U Y L H Z 0 L U U R U
68LMT0205
68LMT0206
(2) Day driving
(3) Night driving
You can adjust the inside rearview mirror
by hand so as to see the rear of your vehi-
cle in the mirror. To adjust the mirror, set
the selector tab (1) to the day position,
then move the mirror up, down or sideways
by hand to obtain the best view.
: $ 5 1 , 1 *
: K H Q H Y H U \ R X G L V F R Q Q H F W D Q G U H F R Q
Q H F W W K H E D W W H U \ R U U H S O D F H W K H I X V H
W K H S L Q F K L Q J S U H Y H Q W L R Q I X Q F W L R Q
Q H H G V W R E H L Q L W L D O L ] H G
7 K H S L Q F K L Q J S U H Y H Q W L R Q I X Q F W L R Q Z L O O
Q R W E H D F W L Y D W H G X Q W L O W K H L Q L W L D O L ] D W L R Q
F R P S O H W H
(1)
(2)(3)
Page 40 of 288
Downloaded from www.Manualslib.com manuals search engine % ( ) 2 5 ( ' 5 , 9 , 1 *
0 6 (
When driving at night, you can move the
selector tab to the night position to reduce
glare from the headlights of vehicles
behind you.
$ X W R ' L P P L Q J 5 H D U Y L H Z 0 L U U R U
L I H T X L S S H G
57L30019
You can adjust the auto dimming rearview
mirror by hand so you can see to the rear
of your vehicle in the mirror. This rearview
mirror has a function of automatically
reducing glare from the lights of vehicles
behind you. The function works when the
ignition mode has been changed to “ON”
by pressing the engine switch.
• The mirror is always set to the automatic
dimming mode when the engine switch
is in the “ON” mode.
• When the “AUTO” switch (2) is pushed,
the green indicator (1) is lit, indicating
that the mirror is set to the automatic
dimming mode. To cancel the automatic
dimming mode, push the “AUTO” switch
(2); the indicator (1) then goes out.
• The auto dimming rearview mirror is
automatically deactivated while the gear-
shift lever is in the “R” position.
57L30020
: $ 5 1 , 1 *
Page 41 of 288
Downloaded from www.Manualslib.com manuals search engine
% ( ) 2 5 ( ' 5 , 9 , 1 *
0 6 (
2 X W V L G H 5 H D U Y L H Z 0 L U U R U VAdjust the outside rearview mirrors so you
can just see the side of your vehicle in the
mirrors.
64MS028
The switch to control the electric mirrors is
located on the driver’s door panel. You can
adjust the mirrors when the ignition switch
is in the “ACC” or “ON” position, or the igni-
tion mode is “ACC” or “ON”. To adjust the
mirrors:
1) Move the selector switch to the left or
right to select the mirror you wish to
adjust.2) Press the outer part of the switch that
corresponds to the direction in which
you wish to move the mirror.
3) Return the selector switch to the center
position to help prevent unintended
adjustment.
2 X W V L G H 5 H D U Y L H Z 0 L U U R U V ) R O G L Q J
6 Z L W F K L I H T X L S S H G
64MS029
You can fold the mirrors when you park the
vehicle in a narrow space. When the igni-
tion switch is in the “ACC” or “ON” position,
or the ignition mode is “ACC” or “ON”,
push the folding switch (1) to fold and
unfold the mirrors. Make sure the mirrors
are completely unfolded before you start
driving.
: $ 5 1 , 1 *
% H F D U H I X O Z K H Q M X G J L Q J W K H V L ] H R U
G L V W D Q F H R I D Y H K L F O H R U R W K H U R E M H F W
V H H Q L Q W K H V L G H F R Q Y H [ P L U U R U % H
D Z D U H W K D W R E M H F W V O R R N V P D O O H U D Q G
D S S H D U I D U W K H U D Z D \ W K D Q Z K H Q V H H Q
L Q D I O D W P L U U R U
LR
(3)
(4) (2)(1)
(1)
(3) (2)
(4)
& $ 8 7 , 2 1
0 R Y L Q J P L U U R U V F D Q S L Q F K D Q G L Q M X U H D
K D Q G ' R Q R W D O O R Z D Q \ R Q H
Page 100 of 288
Downloaded from www.Manualslib.com manuals search engine 2 3 ( 5 $ 7 , 1 * < 2 8 5 9 ( + , & / (
0 6 (
( [ K D X V W * D V : D U Q L Q J
52D334
' D L O \ , Q V S H F W L R Q & K H F N O L V W % H I R U H ' U L Y L Q J
60A187
1) Make sure that windows, mirrors, lights
and reflectors are clean and unob-
structed.
2) Visually check the tires for the following
points:
– the depth of the tread groove
– abnormal wear, cracks and damage
– loose wheel nuts
– existence of foreign material such as
nails, stones, etc.
Refer to “Tires” in
Page 101 of 288
Downloaded from www.Manualslib.com manuals search engine
2 3 ( 5 $ 7 , 1 * < 2 8 5 9 ( + , & / (
0 6 (
4) Make sure the hood is fully closed and
latched.
5) Check the headlights, turn signal lights,
brake lights and horn for proper opera-
tion.
6) Adjust the seat and head restraint.
7) Check the brake pedal and the parking
brake lever.
8) Adjust the mirrors.
9) Make sure that you and all passengers
have properly fastened the seat belts.
10)Make sure that all warning lights come
on as the ignition switch is turned to the
“ON” position or the engine switch is
pressed to change the ignition mode to
ON.
11)Check all gauges.
12)Make sure that the BRAKE SYSTEM
WARNING light turns off when the park-
ing brake is released.
Once a week, or each time you fill your fuel
tank, perform the following under-hood
checks:
1) Engine oil level
2) Coolant level
3) Brake fluid level
4) Battery electrolyte level
5) Windshield washer fluid level
6) Hood latch operation
Pull the hood release handle inside the
vehicle. Make sure that you cannot
open the hood all the way without
releasing the secondary latch. Be sure
to close the hood securely after check-
ing for proper latch operation. See theitem “All latches, hinges and locks” of
Page 124 of 288
Downloaded from www.Manualslib.com manuals search engine (1)
(1)
2 3 ( 5 $ 7 , 1 * < 2 8 5 9 ( + , & / (
0 6 (
NOTE:
If body wax does get on the camera lens,
wipe off the wax with a clean cloth damp-
ened with mild detergent diluted with
water, then wipe with a dry cloth.
+ R Z W R 8 V H 5 H D U Y L H Z & D P H U D1) Turn the ignition switch to the “ON”
position or press the engine switch to
change the ignition mode to ON.
2) Shift the gearshift lever in the “R” posi-
tion.
• The display automatically shows the
view behind the vehicle.
• When the gearshift lever is shifted
from “R” to another gearshift lever
position, the display returns to the
previous display.
NOTE:
• Images shown on the display from the
rearview camera are reversed images
(mirror images).
• The colors of objects on the rearview
camera may differ from the actual object
colors.
• The rearview camera display has first
priority in any display mode. However,
the rearview camera display does not
show the rear view while the system is
initializing. ' L V S O D \ 5 D Q J H R I 5 H D U Y L H Z & D P H U DThe rearview camera display shows the
area behind the rear end of the tailgate.
The display cannot show objects which are
close to the bumper or under the bumper.
The rearview camera display cannot show
obstacles which are higher than the cam-
era. Upper parts of tall objects such as
road signs cannot be viewed on the dis-
play. ( [ D P S O H R I G L V S O D \ U D Q J H R I U H D U Y L H Z
F D P H U D
61MM0A015
61MM0B012
(1) Display range
NOTE:
• Images shown on the display from the
rearview camera are reversed images
(mirror images).
NOTICE
, I Z D W H U H Q W H U V W K H U H D U Y L H Z F D P H U D L W
P D \ F D X V H D P D O I X Q F W L R Q R U F D W F K
I L U H
' R Q R W X V H K L J K S U H V V X U H Z D W H U
D U R X Q G W K H F D P H U D
NOTICE
7 K H F D P H U D O H Q V L V K D U G F R D W H G W R
S U H Y H Q W G D P D J H R U G L V F R O R U D W L R Q
' D P D J H R U G L V F R O R U D W L R Q R I O H Q V P D \
R E V F X U H W K H L P D J H
Page 135 of 288
Downloaded from www.Manualslib.com manuals search engine
' 5 , 9 , 1 * 7 , 3 6
0 6 (
' R ¶ V D Q G ' R Q W ¶ V I R U 6 D I H
' U L Y L Q JExercise care in handling your vehicle. Be
conscious of not only your own safety but
also the safety of others on the road, and
thus enjoy the best and most comfortable
driving experience.
This section contains basic rules for safe
driving. Read it carefully for good under-
standing of the content so that you can
enjoy safe and pleasant driving in your
vehicle.
6 W D U W L Q J
1) Adjust the driver’s seat for the proper
driving posture.
2) Adjust the rear view mirror so as to
obtain the best possible rear view.
3) Before moving off, look forward and
back to confirm safety.4) Don’t start quickly, since it is dangerous
and wastes fuel.
* H Q H U D O G U L Y L Q J
1) Be sure to stop before the stop light and
stop sign. When moving into the inter-
section without any traffic lights or
signs, drive slowly to confirm safety.
72F-08-002
2) Always follow other vehicles at a safe
distance in order to prevent a rear-end
collision, in case the vehicle ahead
make a sudden stop.
3) Turn ON the turn signal at least 30
meters before making a turn or chang-
ing the lane so as not to be hit from
behind.
4) Before entering a corner, decelerate to
a safe speed. Don’t apply brakes during
cornering, or a cornering skid may
occur.5) When overtaking other vehicles, watch
out for the oncoming vehicle and care-
fully confirm the safety.
6) Don’t attempt zigzag driving which will
hinder your control over the vehicle and
cause an accident.
72F-08-011
% U D N L Q J
1) Use the parking brake when parking
your vehicle and shift the gear shift
lever into the first gear or reverse gear
position for the sake of safety.
Page 143 of 288
Downloaded from www.Manualslib.com manuals search engine
2 7 + ( 5 & 2 1 7 5 2 / 6 $ 1 ' ( 4 8 , 3 0 ( 1 7
0 6 (
6 X Q 9 L V R U
77PH004
The sun visors can be pulled down to block
glare coming through the windshield, or
they can be unhooked and turned to the
side to block glare coming through the side
window.
& D U G K R O G H U L I H T X L S S H G 7 \ S H $
67LH064
7 \ S H %
64MS172
(1) Card holder
(2) Mirror cover
You can put a card in the card holder (1) on
the back of the sun visor.
9 D Q L W \ P L U U R U L I H T X L S S H G
64MS076
(3) Vanity mirror
(4) Vanity mirror light (if equipped)
To use the vanity mirror (3) on the back of
the sun visor, pull up the mirror cover (1).
The vanity mirror light (4) comes on when
the mirror cover (1) is opened.
NOTICE
: K H Q X Q K R R N L Q J D Q G K R R N L Q J D V X Q
Y L V R U E H V X U H W R K D Q G O H L W E \ W K H K D U G
S O D V W L F S D U W R U W K H V X Q Y L V R U P D \ J H W
G D P D J H G
( ; $ 0 3 / (
NOTICE
: K H Q \ R X S D U N \ R X U Y H K L F O H R X W G R R U V
L Q G L U H F W V X Q O L J K W R U L Q K R W Z H D W K H U
G R Q R W O H D Y H S O D V W L F F D U G V L Q W K H
K R O G H U 7 K H K H D W P D \ G L V W R U W W K H P
(1)
( ; $ 0 3 / ((2)
(1)
( ; $ 0 3 / (
: $ 5 1 , 1 *
Page 246 of 288
Downloaded from www.Manualslib.com manuals search engine 7-23INSPECTION AND MAINTENANCE
64MS0-74E
*Feature not available in the vehicle.
81A283
PRIMARY FUSE
(1) – Blank
(2) 20 A Power window timer
(3) 15 A Steering lock
(4) 20 A Rear defogger(5)
20 A
Sunroof*
(6)
10 A
DRL*
(7)
10 A
Heated mirror*
(8) 7.5 A Starting signal
(9) 15 A Accessory socket 2
(10) 30 A Power window
(11) 10 A Hazard
(12) 7.5 A BCM
(13) 15 A Ignition coil
(14) 10 A ABS control module
(15) 15 A Accessory socket
(16)
10 A
A-STOP controller*
(17) 15 A Horn
(18) 10 A Stop light
(19) 10 A Air bag
(20) 10 A Back-up light
(21) 15 A Wiper / Washer
(22) 30 A Front wiper
(23) 10 A Dome light(24)
15 A
4WD*
(25)
7.5 A
RR fog lamp*
(26) – Blank
(27) 7.5 A Ignition-1 signal
(28) 15 A Radio 2
(29) 10 A Accessory socket 3
(30) 15 A Radio
(31) 10 A Tail lamp
(32) 20 A D/L
(33) 7.5 A Cruise control
(34) 10 A Meter
(35) 7.5 A Ignition-2 signal
(36)
20 A
Seat heater*
WA R N I N G
Always be sure to replace a blown
fuse with a fuse of the correct amper-
age. Never use a substitute such as
aluminum foil or wire to replace a
blown fuse. If you replace a fuse and
the new one blows in a short period of
time, you may have a major electrical
problem. Have your vehicle inspected
immediately by your D X W K R U L V H G
0 D U X W L 6 X ] X N L Z R U N V K R S.
BLOWN OK