cooling TESLA MODEL 3 2023 Owners Manual

Track Mode, available only on Performance Model 3
vehicles, is designed to modify the stability control, traction control, regenerative braking, and cooling systems to increase performance and handling while driving on closed circuit courses. Track Mode improves
cornering ability by intelligently using the motors, and regenerative and traditional braking systems. When enabled, the cooling system runs at an increased level during and after aggressive driving sessions to allow
your vehicle

WARNING: The area under the seat cushion
houses the high voltage Battery. DO NOT
TOUCH OR PLACE ITEMS ON THE METAL
HOUSING! Doing so can cause serious damage
or injury.
9.
With a 10mm socket, loosen the nut that secures the negative (-) terminal clamp to the negative (-) post on the low voltage lead-acid battery. Release the terminal clamp from the negative (-) post.
10.
With a 10mm socket, release the terminal cover and loosen the nut that secures the positive (+) terminal
clamp to the positive (+) post on the low voltage
lead-acid battery. Release the terminal clamp from the positive (+) post and cover the terminal clamp with a dry rag.
CAUTION: Do not allow the positive (+)
terminal clamp to contact nearby components
like the low voltage battery hold down bracket
or A/C cooling lines.
11.
Unplug the vent tube hose from the negative (-)
terminal side of the low voltage lead-acid battery.
12.
With a 10mm socket, loosen the nut and release the
battery hold down from the top of the low voltage
lead-acid battery by unhooking and sliding it back, taking care to ensure it does not slip into the vehicle.
13.
Using the battery handle, carefully remove the low
voltage lead-acid battery, taking care not to touch or damage the surrounding components.
WARNING: When lifting the low voltage lead-
acid battery, stand in front of the vehicle and
use proper lifting technique. The low voltage
battery weighs approximately 25 lb (12 kg).
Failure to do so may cause serious injury.Maintenance Service Intervals
169Maintenance

7.
With a 10mm socket, release the terminal cover and loosen the nut that secures the positive (+) terminal
clamp to the positive (+) post on the low voltage
lead-acid battery. Release the terminal clamp from the positive (+) post and cover the terminal clamp with a dry rag.
CAUTION: Do not allow the positive (+)
terminal clamp to contact nearby components
like the low voltage lead-acid battery hold
down bracket or A/C cooling lines.
8.
Unplug the vent tube hose from the negative (-)
terminal side of the low voltage battery.
9. With a 10mm socket, loosen the nut and release the
battery hold down from the top of the low voltage
lead-acid battery by unhooking and slipping it back. If needed, tilt the battery hold down backward so it does not slip into the vehicle.10.
Carefully remove the low voltage lead-acid battery,
taking care not to damage the surrounding components.
WARNING: When lifting the lead-acid battery,
stand in front of the vehicle and use proper
lifting technique. The lead-acid battery weighs
approximately 25 lb (12 kg). Failure to do so
may cause serious injury.
11.
Inspect the new low voltage lead-acid battery to make sure it is equipped with a red plug on the
positive (+) terminal side. If the new lead-acid battery does not have a red plug, transfer the red plug from
the old battery to the new one.
CAUTION: Dispose of the old low voltage lead-
acid battery according to local laws, such as
dropping it off at a battery recycling facility.
Keep the battery upright and place it on a towel
or piece of cardboard when transporting it.Maintenance Service Intervals
173Maintenance

7.
Power off the vehicle by navigating to Controls >
Safety > Power Off on the touchscreen.
8.
Disconnect the low voltage cable from penthouse:
a.
In the rear passenger seat, remove the foam cover and set it aside. The foam covers the low voltage
cable.
b.
Release and pull down the gray lever-arm on the
side of the low voltage connector.
c.
Pull the connector upward to disconnect it from the penthouse.
WARNING: The area under the seat cushion
houses the high voltage Battery. DO NOT
TOUCH OR PLACE ITEMS ON THE METAL
HOUSING! Doing so can cause serious damage
or injury.
9.
With a 10mm socket, loosen the nut that secures the
negative (-) terminal clamp to the negative (-) post on the low voltage lead-acid battery. Release the terminal clamp from the negative (-) post.
10.
With a 10mm socket, release the terminal cover and loosen the nut that secures the positive (+) terminal
clamp to the positive (+) post on the low voltage
lead-acid battery. Release the terminal clamp from the positive (+) post and cover the terminal clamp with a dry rag.
CAUTION: Do not allow the positive (+)
terminal clamp to contact nearby components
like the low voltage battery hold down bracket
or A/C cooling lines.Parts and Accessories
195Maintenance

3.
In the front trunk, remove the cabin intake duct and
set it aside.
4.
Power off the vehicle by navigating to Controls >
Safety > Power Off on the touchscreen.
5.
In the front trunk, disconnect the first responder loop
by sliding the red locking tab toward you, pressing
the black tab, and releasing it. Set the
first responder
loop aside.
6.
With a 10mm socket, loosen the nut that secures the
negative (-) terminal clamp to the negative (-) post on the low voltage lead-acid battery. Release the terminal clamp from the negative (-) post.
7.
With a 10mm socket, release the terminal cover and
loosen the nut that secures the positive (+) terminal
clamp to the positive (+) post on the low voltage
lead-acid battery. Release the terminal clamp from the positive (+) post and cover the terminal clamp with a dry rag.
CAUTION: Do not allow the positive (+)
terminal clamp to contact nearby components
like the low voltage lead-acid battery hold
down bracket or A/C cooling lines.
8.
Unplug the vent tube hose from the negative (-)
terminal side of the low voltage battery.
Parts and Accessories
199Maintenance

vehicle certification: 206
lane assist: 108
lane change, automatic: 87
Lane Departure Avoidance: 108
Lap Timer: 69
LATCH child seats, installing: 34
license plate bracket: 202
lifting: 189
lights: 53, 54, 55
hazard warning: 55
headlights after exit: 54
turn signals: 54
load limits: 206
location tracking: 142
locking: 14
lug nut covers: 179
lumbar adjustment: 25
M
maintenance: 166, 167, 176, 183, 187, 188
cleaning: 183
daily checks: 166
fluid replacement intervals: 167
monthly checks: 166
replacing wiper blades: 187
service intervals: 166
tires: 176
washer fluid, topping up: 187
washer jets, cleaning: 188
map orientation: 142
map updates: 147
mats: 186
media: 148, 151
settings: 148
sources, show and hide: 148
mileage upon delivery: 283
mirrors: 49
mobile app: 140
mobile app access: 140
Mobile Connector: 155, 158
description: 155
using: 158
modifications: 190
motor specifications: 210
My Apps: 8
my car does what?: 151
myQ: 134
programming and using: 134
N
naming your vehicle: 9
Navigate on Autopilot: 90
NHTSA, contacting: 285
O
Obstacle-Aware Acceleration: 111
occupancy sensor, front passenger: 40
occupant classification: 42
odometer: 71
Off-Peak Charging: 163
offset from speed limit: 114
Online Routing: 146
overhang dimensions: 208
overtake acceleration: 80
Owner Information, about: 280
P
Park Assist: 65
parking brake: 62
parking, using Autopark: 100
parking, using Summon: 102
parts replacement: 190
passenger detection: 40
passenger detection, front: 40
pedestrian warning: 73
personal data, erasing: 9
phone: 10, 122
authenticating as a key: 10
using: 122
phone app: 123
phone key: 10, 13
adding as a key: 13
removing as a key: 13
PIN: 46
PIN to Drive: 127
Post-drive Cooling (Track Mode): 69
power: 61
gained from regenerative braking: 61
power cycling: 50
power socket: 23
power windows: 16, 204
powering on and off: 50
Preconditioning: 163
Proposition 65: 283
public charging stations: 155
R
radio: 148, 151
Index