instrument panel TESLA MODEL S 2012 Owner Safety Information

4OWNER SAFETY INFORMATIONAIRBAGS
FRONT PASSENGER DETECTIONModel S has an occupancy sensor in the front passenger seat that
controls the status of the airbags based on the weight of the occupant.
Passenger airbag status displays in the top right corner of the touchscreen
to indicate whether the airbag will inflate (ON) or not inflate (OFF) if a
collision occurs:Front passenger seat occupancy* Passenger airbag status
Empty OFF
Infant in child seat (up to 20 lbs) OFF
Child or small occupant (20-100 lbs) ON or OFF
Heavy object/occupant ON
*Note: Values are approximate. Occupants whose weight is close to the low weight
threshold can cause the status to occasionally switch on and off depending on
seating position and physique.If the status shows the airbag as permanently ON, even when the seat is
empty and the seat belt is unbuckled, contact Tesla immediately.
To make sure the sensing system can correctly detect occupancy status,
eliminate the following:
• Objects lodged underneath the seat.
• Heavy objects sitting on the seat (briefcase, large purse).• Objects wedged between the seat back and seat cushion.
• Cargo interfering with the seat.
• Rear passengers interfering with the seat.
• Aftermarket items attached to, or sitting on, the seat (covers, mats,
blankets, etc.).
These conditions can interfere with the occupancy sensor. If you’ve
eliminated the above possibilities, and the airbag status is still incorrect,
ask passengers to ride in the rear seat and contact Tesla to have the
airbag system checked.
NOTE: The front passenger seat’s sensing system affects the operation of
the front passenger airbag only. All other airbags, including the side airbag
and curtain airbag, are not affected.
AIRBAG WARNING INDICATOR LIGHT
The airbag warning on the instrument panel alerts you
of a malfunction of the airbag system. When Model S is
powered on, all components of the airbag system are
continuously monitored. Contact Tesla if this indicator light
stays on.

6OWNER SAFETY INFORMATIONSEAT BELTS
USING SEAT BELTSSeat belts and child safety seats are the most effective means of
protecting occupants if a collision occurs. Therefore, wearing a seat belt
is required by law in most jurisdictions.
Both the driver and passenger seating positions are equipped with three-
point inertia reel seat belts. Inertia reel belts are tensioned automatically
to allow occupants to move comfortably during normal driving conditions.
The belt reel automatically locks to prevent movement of occupants when
Model S experiences a force associated with hard acceleration, braking,
cornering or an impact in a collision. To fasten a belt1. Ensure correct positioning of the seat.
2. Draw the belt out
smoothly, ensuring the
belt lays flat across the
pelvis, chest and mid-
point of the collar bone
between the neck and
shoulder.
3. Insert the latch plate into
the buckle and press
down until you hear a
“click” indicating it is
locked in place.
4. Pull the belt to check that it’s securely fastened.
5. Pull the diagonal part of the belt towards the reel to remove excess
slack.
To release a beltHold the belt near the buckle to prevent the belt from retracting too quickly,
then press the button on the buckle. The belt retracts automatically. Wearing seat belts when pregnantDo not put the lap portion or shoulder portion of
the seat belt over the abdominal area. Wear the
lap portion of the belt as low as possible across
the hips, not the waist. Position the shoulder
portion of the belt between the breasts and to
the side of the abdomen. Consult your doctor for
specific guidance.Seat belt reminder
The seat belt reminder on the instrument panel alerts you
if the seat belt for an occupied front seat is not fastened.
If the belt remains unfastened, this reminder flashes, and
you’ll hear an intermittent chime.
Seat belt pre-tensionersThe front seat belts are equipped with
pre-tensioners that work in conjunction with
the airbags in a severe frontal collision. The
pre-tensioners automatically retract both the seat
belt buckle and the seat belt webbing, reducing
slack in both the lap and diagonal portions of the
belts, resulting in reduced forward movement of
the occupant. Once the seat belt pre-tensioners
have been activated, they must be replaced. After any accident, have the
airbags, seat belt pre-tensioners, and any associated components checked
and, if necessary, replaced.

17OWNER SAFETY INFORMATION
MAINTAIN PROPER TIRE PRESSURESCheck tire pressures monthly when tires are cold and Model S has been parked
for over three hours. Inflate tires to the Tesla recommended inflation pressures,
printed on the Tire and Loading Information Label (see page 16). These
recommended pressures provide optimum ride and handling characteristics.
WARNINGS:Under-inflation is the most common cause of tire failures and can cause a tire
to overheat, resulting in severe tire cracking, tread separation, or “blowout”,
which causes unexpected loss of vehicle control and increased risk of injury.
Under-inflation also reduces Battery range and tire tread life.
Check tire pressures using an accurate pressure gauge when tires are
cold. It takes only one mile of driving to warm up the tires sufficiently to
affect tire pressures. Parking the vehicle in direct sunlight or in high ambient
temperatures can also affect tire pressures. If you must check warm tires,
expect increased pressures. Don’t let air out of warm tires in an attempt
to match recommended cold tire pressures. A hot tire at or below the
recommended cold tire inflation pressure is dangerously under-inflated.
To check and adjust tire pressures1. Remove the valve cap, then firmly press the tire gauge onto the valve.
2. If required, add air to reach the recommended pressure.
3. Re-check pressure by removing and re-attaching the tire gauge.
4. If you added too much air, release air by pushing on the metal stem in the
center of the valve. Re-check and adjust if necessary.
5. Screw the valve cap back on to prevent dirt from entering (periodically
inspect the valve cap for damage such as cracking).TIRE PRESSURE MONITORING SYSTEM (TPMS)Each tire should be checked monthly when cold and inflated to the inflation
pressure recommended by the vehicle manufacturer on the vehicle placard or
tire inflation pressure label. (If your vehicle has tires of a different size than the
size indicated on the vehicle placard or tire inflation pressure label, you should
determine the proper tire inflation pressure for those tires.)As an added safety feature, your vehicle has been equipped with a tire
pressure monitoring system (TPMS) that illuminates a low tire pressure telltale
when one or more of your tires is significantly under-inflated.
Accordingly, when the low tire pressure telltale illuminates, you should stop and
check your tires as soon as possible, and inflate them to the proper pressure.
Driving on a significantly under-inflated tire causes the tire to overheat and can
lead to tire failure. Under-iinflation also reduces fuel efficiency and tire tread
life, and may affect the vehicle’s handling and stopping ability.
Please note that the TPMS is not a substitute for proper tire maintenance, and
it is the driver’s responsibility to maintain correct tire pressures, even if under-
inflation has not reached the level to trigger illumination of the TPMS low tire
pressure telltale.
Your vehicle has also been equipped with a TPMS malfunction indicator light
to indicate when the system is not operating properly.
The TPMS malfunction indicator light is combined with the low tire pressure
telltale. When the sytem detects a malfunction, the telltale flashes for
approximately one minute and then remain continuously illuminated. This
sequence will continue upon subsequent vehicle start-ups as long as the
malfunction exists.
When the malfunction indicator light is illuminated, the system may not be
able to detect or signal low tire pressure as intended. TPMS malfunctions
may occur for a variety of reasons, including the installation of replacement or
alternate tires or wheels on the vehicle that prevent the TPMS from functioning
properly. Always check the TPMS malfunction telltale after replacing one
or more tires or wheels on your vehicle to ensure that the replacement or
alternate tires and wheels allow the TPMS to continue to function properly.
The tire pressure warning on the instrument panel alerts you
if one or more of your tires is significantly under-inflated. Stop
and check tire pressures as soon as possible, and inflate to
the recommended pressures
.
NOTE: The warning light does not turn off immediately after you adjust tire
pressures. It turns off when you drive Model S above 25 mph (40 km/h) for
more than 10 minutes with tires at the recommended pressures.
TIRE PRESSURES