change time TOYOTA 4RUNNER 1998 User Guide

4RUNNER (1998)
CD (Compact Disc)
Push ºCDº to switch from radio or
cassette operation to compact disc op-
eration. If the audio system is off, you
can turn on the compact disc player
by pushing ºCDº. In both cases, a
disc must already be loaded in the
player.
When the audio is set into compact
disc operation, the display shows the
track or, track and disc number cur-
rently being played. Each time you
push ºCDº, the system changes be-
tween built- in single disc player and
automatic changer.
Your audio system shows six different
display if the player malfunctions.
If ºWAITº appears on the display, it
indicates inside the player unit may
be too hot due to the very high ambi-
ent temperature. Remove the disc or
magazine from the player and allow
the player to cool down.
If ºErr 1º appears on the display, it
indicates the disc is dirty, damaged,
or it was inserted up- side down.
Clean the disc or insert it correctly. If ºErr 2º appears on the display,
it
indicates no disc is loaded inside the
magazine, insert a disc.
If ºErr 3º or ºErr 4º on the display,
it indicates there is a trouble inside
the system. Eject the disc or maga-
zine. Set the disc or magazine again.
If ºOPEnº appears on the display, it
indicates the compact disc auto
changer lid is open. Close the com-
pact disc auto changer lid.
If the malfunction is not recovered,
take your vehicle to your Toyota deal-
er.
DISC !~
Compact disc auto changer onlyÐ
By using this button, you can select
a disc you wish to listen to.
Push the either side of the button until
the number of the disc you want to
listen to appears on the display. Dolby

B NR *
If you are listening to a tape that was
recorded with Dolby B Noise Reduc-
tion, push the button marked with the
double- D symbol. The double- D sym-
bol will appear on the display. Push
the button again to turn off Dolby B
NR.
The Dolby NR mode reduces tape
noise by about 10 dB. For best sound
reproduction, play your tapes with this
button on or off according to the mode
used for recording the tape. * : Dolby noise reduction manufactured under license
from Dolby Laboratories Licensing Corporation.
ºDOLBYº and the double D symbol
are trademarks
of Dolby Laboratories Licensing Corporation.
MTL (Metal) Display
If a metal or chrome equivalent cas-
sette tape is put in the cassette play-
er, the player will automatically adapt
to it and ºMTLº will appear on the
display.

4RUNNER (1998)
PROG (Program)
Push ºPROGº to select the other side
of a cassette tape. The display indi-
cates which side is currently selected (º
º indicates top side, ºº
indicates bottom side).
Auto- reverse feature: After the cas-
sette player reaches the end of a tape
side, it automatically reverses and be-
gins to play the other side. This is
true whether the cassette was playing
or fast forwarding.
PWR´VOL (Power´Volume)
Push ºPWR´VOLº to turn the audio
system on and off. Turn ºPWR´VOLº
to adjust the volume.
RAND (Random)
There are two random featuresÐyou
can either listen to the tracks on all
the compact discs in the magazine in
random order, or only listen to the
tracks on a specific compact disc in
random order. Random playing for the tracks on a
disc: Quickly push and release
ºRANDº. ºRANDº will appear on the
display and the disc you are listening
to in random order. If you hear a
beep, you held the button too long,
and the player will play all the tracks
in the magazine in random order. To
turn off the random feature, push the
ºRANDº a second time.
Compact disc auto changer onlyÐ
Random playing for all the tracks in
the magazine:
Push and hold ºRANDº until you hear
a beep. ºD´RANDº will appear on the
display and the player will perform all
the tracks on all the discs in the mag-
azine in random order. To turn off the
random feature, push ºRANDº a sec-
ond time.
RPT (Repeat)
Cassette Player
Push ºRPTº while the track is playing.
ºRPTº will appear on the display.
When the track ends, it will automati-
cally be rewound and replayed. This
process will be continued until you
push the button again to turn off the
repeat feature.There must be at least 3 seconds of
blank space between tracks in order
for the repeat feature to work correct-
ly.

4RUNNER (1998)
Compact Disc Player
There are two repeat featuresÐyou
can either replay a disc track or a
whole compact disc.
Repeating a track:
Quickly push and release ºRPTº while
the track is playing. ºRPTº will appear
on the display. If you hear a beep,
you held the button too long, and the
player will repeat the whole disc.
When the track ends, it will automati-
cally be replayed. This process will be
continued until you push the button
again to turn off the repeat feature.
Compact disc auto changer onlyÐ
Repeating a disc:
Push and hold ºRPTº until you hear a
beep. ºD´RPTº will appear on the dis-
play. The player will repeat all the
tracks on the disc you are listening
to. When the disc ends, the player
will automatically go back to the top
track of the disc and replay. This pro-
cess will be continued until you push
the button again to turn off the repeat
feature. SCAN
Radio
You can either scan all the frequen-
cies on a band or scan only the pre-
set stations for that band.
To scan all the frequencies:
Quickly push and release ºSCANº. If
you hear a beep, you held the button
too long, and the radio will scan the
preset stations. The radio will find the
next station up the station band, stay
there for a few seconds, and then
scan again. To select a station, push
ºSCANº a second time.
To scan the preset stations:
Push and hold ºSCANº until you hear
a beep. The radio will tune in the next
preset station up the band, stay there
for a few seconds, and then move to
the next preset station. To select a
station, push ºSCANº a second time.
Compact disc player
There are two scan featuresÐyou can
either scan the tracks on a specific
disc or scan the first tracks of all the
discs in the magazine.
Scanning for the tracks on a disc:
Quickly push and release ºSCANº.
ºSCANº will appear on the display and
the player will scan all the tracks on
the disc you are listening to. If you
hear a beep, you held the button too
long, and the player will scan the first
tracks of all the discs in the maga-
zine. To select a track, push the
ºSCANº a second time. If the player
scanned all the tracks on the disc, it
will stop scanning.
Compact disc auto changer onlyÐ
Scanning for the first tracks of all the
discs in the magazine:
Push ºSCANº until you hear a beep.
ºD´SCANº will appear on the display
and the player will perform the first
track of the next disc. To select a
disc, push the ºSCANº a second time.
If the player has scanned all the
discs, it will stop sc
anning.

4RUNNER (1998)
SEEK (Seeking)
Radio
In the seek mode, the radio finds and
plays the next station up or down the
station band.
To seek a station, push and hold the º~ º or º !º side of ºSEEKº until you
hear a beep. Do this again to find
another station.
Cassette Player
By using this button, you can skip up
or down to a different track.
You can skip up to nine tracks at a
time.
Push the up or down side of the but-
ton. ºFF 1º or ºREW 1º will appear on
the display.
Next, push either side of the track
button until the number on the display
reaches the number of tracks you
want to skip. If you push the button
ten times, the skip feature will be
turned off. When counting the number of tracks
you want to rewind, remember to
count the current track as well. For
example, if you want to rewind to a
song that is two before the song you
are listening to, push on the down
side of the button until ºREW 3º ap-
pears on the display.
If you have pushed the track button
more than you wanted to, push the
other side of the button. The track
number will be reduced.
The track number you select is not
valid if it is higher than the number
of tracks remaining on the current
cassette side.
After the beginning of the tape is
reached, the player will automati-
cally start playing the same side.
After the end of the tape is
reached, the player will automati-
cally reverse sides and start play-
ing the other side.
There must be at least 3 seconds of
blank space between tracks for the
track button to work correctly. In addi-
tion, the feature may not work well
with some spoken word, live, or clas-
sical recordings. SKIP
The skip feature allows you to fast
forward past long stretches of blank
tape. This is especially useful at the
end of cassettes.
Push ºSKIPº. ºSKIPº will appear on
the display. The cassette player will
keep track of how much blank space
it plays. Any time it has played about
10 seconds of blank tape, it will auto-
matically fast forward to the next track
and begin to play.
Push the button a second time to turn
off the skip feature.
ST (Stereo reception) display
Your radio automatically changes to
stereo reception when a stereo broad-
cast is received. ºSTº appears on the
display. If the signal becomes weak,
the radio reduces the amount of chan-
nel separation to prevent the weak
signal from creating noise. If the sig-
nal becomes extremely weak, the ra-
dio switches from stereo to mono re-
ception.

4RUNNER (1998)
TA P E
Push ºTAPEº to switch from radio or
compact disc operation to cassette op-
eration. If the audio system is off, you
can turn on the cassette player by
pushing ºTAPEº. In both cases, a cas-
sette must already be loaded in the
player.
TRACK (Track up/down button):
Compact disc player
By using this button, you can skip up
or down to a different track.
Push either side of the track button
until the number of the track you want
to listen to appears on the display. If
you want to return the beginning of
the current track, push the down side
of the button one time, quickly.
TUNE (Tuning)
Your Toyota has an electronic tuning
radio (ETR). Push and release the º ~º
(up) or º !º (down) side of ºTUNEº to
step up or down the station band. (If
you hear a beep, you held the button
too long and the radio will go into the
seek mode.)
NOTICE
To ensure the correct audio sys-
tem operation:
Be careful not to spill bever-ages over the audio system.
Do not put anything other thana cassette tape or Compact
Disc into the slot.
RADIO RECEPTION
Usually, a problem with radio recep-
tion does not mean there is a problem
with your radio Ðit is just the normal
result of conditions outside the ve-
hicle.
For example, nearby buildings and ter-
rain can interfere with FM reception.
Power lines or telephone wires can
interfere with AM signals. And of
course, radio signals have a limited
range, and the farther you are from a
station, the weaker its signal will be.
In addition, reception conditions
change constantly as your vehicle
moves. Here are some common reception
problems that probably do not indicate
a problem with your radio: FM
Fading and drifting stationsÐGeneral-
ly, the effective range of FM is about
40 km (25 miles). Once outside this
range, you may notice fading and
drifting, which increase with the dis-
tance from the radio transmitter. They
are often accompanied by distortion.
Multi- pathÐFM signals are reflective,
making it possible for two signals to
reach your antenna at the same time.
If this happens, the signals will cancel
each other out, causing a momentary
flutter or loss of reception.
Static and flutteringÐThese occur
when signals are blocked by buildings,
trees, or other large objects. Increas-
ing the bass level may reduce static
and fluttering.
Station swappingÐIf the FM signal
you are listening to is interrupted or
weakened, and there is another strong
station nearby on the FM band, your
radio may tune in the second station
until the original signal can be picked
up again.
ÐCar audio system operati
n
hints

4RUNNER (1998)
The digital clock indicates the time.
The key must be in the ºACCº or
ºONº position.
To reset the hour: Push the ºHº but-
ton.
To reset the minutes: Push the ºMº
button.
If quick adjustment to a full hour is
desired, push the º:00º button.
For example, if the º:00º button is
depressed when the time is between
1:01'1:29, the time will change to
1:00. If the time is between
1:30 '1:59, the time will change to
2:00. Once the electrical power source has
been disconnected from the clock, the
time is automatically set to 1:00 (one
o'clock).
When the instrument panel lights are
turned on, the brightness of the time
indication will be reduced.
Cigarette lighter and ashtray

4RUNNER (1998)
NOTICE
A large amount of unburned
gases flowing into the three- waycatalytic converter may cause itto overheat and create a fire haz-
ard. To prevent this and otherdamage, observe the followingprecautions:
Use only unleaded gasoline.
Do not drive with an extremely
low fuel level; running out offuel could cause the engine to misfire, creating an excessive
load on the three- way catalyticconverter.
Do not allow the engine to runat idle speed for more than 20 minutes.
Avoid racing the engine.
Do not push- start or pull- start
your vehicle.
Do not turn off the ignitionwhile the vehicle is moving.
Keep your engine in good run-
ning order. Malfunctions in theengine electrical system, elec-tronic ignition system/distribu-
tor ignition system or fuel sys-tems could cause an extremelyhigh three- way catalytic con-
verter temperature.
If the engine becomes difficultto start or stalls frequently,
take your vehicle in for acheck- up as soon as possible.
Remember, your Toyota dealer
knows your vehicle and itsthree- way catalytic converter
system best.
To ensure that the three- waycatalytic converter and the en-
tire emission control system op-erate properly, your vehiclemust receive the periodic in-
spections required by the Toyo-ta Maintenance Schedule. For scheduled maintenance informa-
tion, refer to the separateºOwner 's Manual Supplement/Maintenance Scheduleº.
Engine exhaust cautions
CAUTION
Avoid inhaling the engine ex-
haust. It contains carbon mon-
oxide, which is a colorless and
odorless gas. It can cause un-
consciousness or even death.
Make sure the exhaust system
has no holes or loose connec-
tions. The system should be
checked from time to time. If
you hit something, or notice a
change in the sound of the ex-
haust, have the system checked
immediately.
Do not run the engine in a ga-
rage or enclosed area except
for the time needed to drive the
vehicle in or out. The exhaust
gases cannot escape, making
this a particularly dangerous
situation.
Do not remain for a long time
in a parked vehicle with the en-
gine running. If it is unavoid-
able, however, do so only in an
unconfined area and adjust the
heating or cooling system to
force outside air into the ve-
hicle.

4RUNNER (1998)
Automatic transmission ºParkº mech- anism
Check the lock release button of the
selector lever for proper and smooth
operation. On a safe incline, check
that your vehicle is held securely with
the selector lever in ºPº position and
all brakes released.
IN THE ENGINE COMPARTMENT
Items listed below should be
checked from time to time, e.g.
each time when refueling.
Washer fluid
Make sure there is sufficient fluid in
the tank. See Chapter 7- 3 for addi-
tional information.
Engine coolant level
Make sure the coolant level is be-
tween the ºFULLº and ºLOWº lines on
the see- through reservoir when the
engine is cold. See Chapter 7- 2 for
additional information.
Battery electrolyte level
Make sure the electrolyte level of all
battery cells is between upper and
lower level lines on the case. Add
only distilled water when replenishing.
See Chapter 7- 3 for additional in-
formation. Brake fluid level
Make sure the brake fluid level is cor-
rect. See Chapter 7- 2 for additional
information.
Engine oil level
Check the level on the dipstick with
the engine turned off and the vehicle
parked on a level spot. See Chapter
7- 2 for additional information.
Power steering fluid level
Check the level through the reservoir.
The level should be in the ºHOTº or
ºCOLDº range depending on the fluid
temperature. See Chapter 7- 2 for
additional information.
Exhaust system
If you notice any change in the sound
of the exhaust or smell exhaust
fumes, have the cause located and
corrected immediately. (See engine ex-
haust cautions in Part 2.)
Be on the alert for changes in perfor-
mance, sounds, and visual tip- offs
that indicate service is needed. Some
important clues are as follows:
Engine missing, stumbling, or ping-
ing
Appreciable loss of power
Strange engine noises
A leak under the vehicle (however,
water dripping from the air condi-
tioning after use is normal.)
Change in exhaust sound (This
may indicate a dangerous carbon
monoxide leak. Drive with the win-
dows open and have the exhaust
system checked immediately.)
Flat- looking tire; excessive tire
squeal when cornering; uneven tire wear
Vehicle pulls to one side when
driving straight on a level road
Strange noises related to suspen-
sion movement
Loss of brake effectiveness;
spongy feeling brake or clutch ped-
al; pedal almost touches floor; ve-
hicle pulls to one side when brak-
ing
Engine coolant temperature continu-
ally higher than normal
Does your vehicle need
repairing?

4RUNNER (1998)
CAUTION
Do not mix radial, bias belted,
or bias- ply tires on your ve-
hicle. It can cause dangerous
handling characteristics, result-
ing in loss of control.
Do not use tires or wheels oth-
er than the manufacture's rec-
ommended size.
Toyota recommends all four tires,
or at least both of the front or rear
tires be replaced at a time as a set.
See ºIf you have a flat tireº in Part
4 for tire change procedure.
When a tire is replaced, the wheel
should always be balanced.
An unbalanced wheel may affect ve-
hicle handling and tire life. Wheels
can get out of balance with regular
use and should therefore be balanced
occasionally.
When replacing a tubeless tire, the
air valve should also be replaced
with a new one. Rotating tires