ignition TOYOTA 4RUNNER 1998 Service Manual

4RUNNER (1998)
If the new fuse immediately blows out,
there is a problem with the electrical
system. Have your Toyota dealer cor-
rect it as soon as possible.
CAUTION
Never use a fuse with a higher
amperage rating, or any other ob-
ject, in place of a fuse. This may
cause extensive damage and
possibly a fire.
Adding washer fluid
If any washer does not work, the
washer tank may be empty. Add
washer fluid.
You may use plain water as washer
fluid. However, in cold areas where
temperatures range below freezing
point, use washer fluid containing anti-
freeze. This product is available at
your Toyota dealer and most auto
parts stores. Follow the manufactur-
er's directions for how much to mix
with water.
NOTICE
Do not use engine antifreeze or
any other substitute because itmay damage your vehicle's paint.
Replacing light bulbsÐ
The following illustrations show how to
gain access to the bulbs. When re-
placing a bulb, make sure the ignition
switch and light switch are off. Use
bulbs with the wattage ratings given in
the table.
CAUTION
Halogen bulbs have pressurized
gas inside and require special
handling. They can burst or shat-
ter if scratched or dropped. Hold
a bulb only by its plastic or metal
case. Do not touch the glass part
of a bulb with bare hands.
NOTICE
Only use a bulb of the listed type.