wheel bolt torque TOYOTA 4RUNNER 1998 Owners Manual

4RUNNER (1998)
Anchor
bracket
Bolt
Spacer730 mm
(28.7 in.)
380 mm
(15.0 in.)
380 mm
(15.0 in.)
On the filler p anel behind the rear
seat
a. Using the illustration as a guide,
run your fingers across the trim of the
filler p anel itself to locate the position
of the holes underneath.
b. Make a hole in the covering direct-
ly above the hole in the filler p anel.
c. Insert a 15 mm (0.6 in.) spacer
and tighten down the anchor bracket
for your child restraint system with a
bolt. Torque the bolt to 16.5Ð24.7 N Vm (1.68Ð2.52 kgf Vm, 12.2Ð18.2
ft Vlbf). To comply with Canada Motor Vehicle
Safety Standards, vehicles sold in
Canada are provided with a bracket
set in the glovebox, designed for use
with any of the 3 anchor locations
shown in the illustration.
If your child restraint system does not
provide any of the necessary parts,
ask your Toyota dealer. (See ºÐChild
restraint systemº.)
Tilt steering wheel