ECO mode TOYOTA 4RUNNER 2008 N210 / 4.G Repair Manual

465
AUTOMATIC TRANSMISSION
Fluid capacity, L (qt., Imp. qt.):4.0 L V6 (1GR−FE) engine 10.7 (11.3, 9.4)
∗
4.7 L V8 (2UZ−FE) engine
10.9 (11.5, 9.6)∗
∗
: The fluid capacity is the quantity of ref- erence. If replacement is necessary,
contact your Toyota dealer.
Fluid type: Toyota Genuine ATF WS
Change automatic transmission fluid only
as necessary.
Generally, it is necessary to change
automatic transmission fluid only if your
vehicle is driven under one of the Special
Operating Conditions listed in your
Scheduled Maintenance Guide" or
Owner ’s Manual Supplement". When
changing the automatic transmission fluid,
use only Toyota Genuine ATF WS" (ATF
JWS3324 or NWS9638) to aid in assuring
optimum transmission performance. Notice: Using automatic transmission
fluid other than Toyota Genuine ATF
WS" may cause deterioration in shift
quality, locking up of your transmission
accompanied by vibration, and ultimate-
ly damage the automatic transmission
of your vehicle.
Please contact your Toyota dealer for fur-
ther details.
TRANSFER
Oil capacity, L (qt., Imp. qt.):
1.4(1.5,1.2)
Oil type: Hypoid gear oil API GL−5
Recommended oil viscosity: SAE 75W−90 DIFFERENTIAL (4.0 L V6 [1GR−FE] en-
gine)
Oil capacity, L (qt., Imp. qt.):
Two−wheel drive models 3.05(3.2,2.7)
Four−wheel drive models Front 1.5(1.6,1.3)
Rear 3.05(3.2,2.7)
Oil type: Hypoid gear oil API GL−5
Recommended oil viscosity: Front SAE 75W−90
Rear Above −18 C (0 F)
SAE 90
Below −18 C (0 F)
SAE 80W or 80W−90

466
DIFFERENTIAL (4.7 L V8 [2UZ−FE] en-
gine)
Oil capacity, L (qt., Imp. qt.):Two−wheel drive models 3.05(3.2,2.7)
Four−wheel drive models Front 1.4(1.5,1.2)
Rear 3.05(3.2,2.7)
Oil type: Hypoid gear oil API GL−5
Recommended oil viscosity: Above −18 C (0 F)
SAE 90
Below −18 C (0 F)
SAE 80W or 80W−90
CHASSIS LUBRICATION
Propeller shafts: SpidersLithium base chassis grease, NLGI
No.2
Slide yokes Molybdenum−disulfide lithium base
chassis grease, NLGI No.2 or lithium
base multipurpose grease, NLGI No.2 BRAKES
Minimum pedal clearance when depressed
with the force of 490 N (50 kgf, 110 lbf)
with the engine running, mm (in.):
54(2.1)
Pedal free play, mm (in.): 16(0.040.24)
Pad wear limit, mm (in.): 1.0(0.04)
Lining wear limit, mm (in.): 1.0(0.04)
Parking brake adjustment when depressed
with the force of 294 N (30 kgf, 66.1 lbf): 57 clicks
Fluid type: SAE J1703 or FMVSS No.116 DOT 3
STEERING
Wheel free play: Less than 30 mm (1.2 in.)
Power steering fluid type: Automatic transmission fluid DEXRON II
or III