lock TOYOTA 4RUNNER 2008 N210 / 4.G Quick Reference Guide

15
OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
Operating from inside
Windows
Driver side
Automatic operation (driver side only) Push the
switch completely down or pull it completely up and
release to fully open or close. To stop window
midway, lightly push the switch in the opposite
direction.
Window lock switch Deactivates all passenger
windows. Driver’s window remains operable.
NOTE: If the battery is disconnected, the window
will need to be reinitialized. Refer to the Owner’s
Manualfor more details.
Window-Rear hatch
Operating from outside
Up
Down
Window
lock switch
Window lock
switch
Tu r n l e f t
and hold
Up
Down
Open
Open
Turn right
and hold
Close
Close
NOTE: If the battery is disconnected, the rear hatch
window will need to be reinitialized. Refer to the
Owner’s Manualfor more details.

20
FEATURES/OPERATIONS
Front audio system
DVD player
DVD screen
Remote control
A/V input adapter
115V AC Power outlet
115V AC Power outlet ON/OFF switch
Door locks
UnlockLock
Rear seat entertainment system
(if equipped)

24
Tire Pressure Warning System
The system is designed to provide a warning “ ”
when tire pressure of any one of the tires (including
the spare) is critically low.
Refer to the Owner’s Manualfor more details.
SAFETY AND
EMERGENCY FEATURES
Seat belts-Shoulder belt anchor
Push up or squeeze
lock release to lower
Moving the lever to “LOCK” will allow the door to
be opened only from the outside.
Doors-Child safety locks
Rear door
If belt is fully extended, then retracted even
slightly, it cannot be re-extended beyond that point,
unless fully retracted again. This feature is used to
help hold child restraint systems securely.
To find more information about seat belts, and how
to install a child restraint system, refer to the
Owner’s Manual.
Keep as low on
hips as possible
Take up
slack
Too high
Seat belts

Spare tire & tools
Tool location
Removing the spare tire
25
OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
(1) Assemble the jack handle.
(2) Insert the jack handle end through the opening
in the bumper, and into the lowering screw.
(3) Turn the jack handle counterclockwise.
Refer to the
Owner’s Manualfor tire changing and
jack positioning procedures.
Tool bag
Jack
(1)
(2)
(3)