fuel type TOYOTA 4RUNNER 2010 N280 / 5.G Owners Manual

175
2-1. Driving procedures
2
When driving
4RUNNER_U
■
Shift position purpose
*1: To improve fuel efficiency and reduce noises, set the shift lever in the D
position for normal driving.
*2: Selecting shift ranges using S mode restricts the upper limit of the pos-sible gear ranges, controls engine braking forces, and prevents unnec-
essary upshifting.
Shift positionFunction
Standard typeMulti-mode type
PParking the vehicle/ starting the engine
RReversing
NNeutral
DNormal driving*1
SS mode driving*2
( P. 176)
3Position for engine
braking
2Position for more
powerful engine braking
LPosition for maximum engine braking

185
2-2. Instrument cluster
2
When driving
4RUNNER_U
■
Eco Driving Indicator and average fuel consumption
Non-Optitron type meter
Eco Driving Indicator Light
During environment-friendly
acceleration operation (Eco driv-
ing), Eco Driving Indicator Light
will turn on.
Eco Driving Indicator Zone
Display
Suggests Zone of Eco driving
with current Eco driving ratio
based on accelerator pedal oper-
ation.
Zone of Eco driving
Eco driving ratio based on
accelerator pedal operation
In case over-use of the accelera-
tor causes the vehicle to exceed
Zone of Eco driving, the right of
Eco Driving Indicator Zone Dis-
play will blink and Eco Driving
Indicator Light will turn off.
Average fuel consumption
Displays the average fuel con-
sumption since the function was
reset.
Pressing and holding the display
change button will reset the aver-
age fuel consumption.
CTH22AS054

186 2-2. Instrument cluster
4RUNNER_UOptitron type meter
Eco Driving Indicator Light
During environment-friendly
acceleration operation (Eco driv-
ing), Eco Driving Indicator Light
will turn on.
Eco Driving Indicator Zone
Display
Suggests Zone of Eco driving
with current Eco driving ratio
based on accelerator pedal oper-
ation.
Zone of Eco driving
Eco driving ratio based on
accelerator pedal operation
In case over-use of the accelera-
tor causes the vehicle to exceed
Zone of Eco driving, the right of
Eco Driving Indicator Zone Dis-
play will blink and Eco Driving
Indicator Light will turn off.
Average fuel consumption
Displays the average fuel con-
sumption since the function was
reset.
Pressing and holding the display
change button will reset the aver-
age fuel consumption.
CTH22AS055

188 2-2. Instrument cluster
4RUNNER_U
■The meters and display illuminate when (Optitron type meter)
Vehicles without a smart key system:
The engine switch is in the “ON” position.
Vehicles with a smart key system:
The “ENGINE START STOP” switch is in IGNITION ON mode.
■ Eco Driving Indicator operates when
The vehicle is being driven with the shift lever in D.
■ When the average fuel consumption is reset
The average fuel consumption displayed on the accessory meter and “Past
Record” screen of the navigation system (if equipped) will be reset at the
same time.
■ The brightness of the instrument panel lights (Optitron type meter)
When the headlight switch is turned to on, the brightness will be reduced
slightly unless the control dial is turned fully upward.
NOTICE
■ To prevent damage to the engine and its components
● Do not let the indicator needle of the tachometer enter the red zone, which
indicates the maximum engine speed.
● The engine may be overheating if the engine coolant temperature gauge is
in the red zone (H). In this case, immediately stop the vehicle in a safe
place, and check the engine after it has cooled completely. ( P. 603)
■ While driving (Optitron type meter)
When the voltmeter indicates more than 19 V or less than 9 V, the battery
may be malfunctioning. Have your vehicle checked at your Toyota dealer.

613
6-1. Specifications
6
Vehicle specifications
4RUNNER_U
Engine
2.7 L 4-cylinder (2TR-FE) engine
4.0 L V6 (1GR-FE) engine
Fuel
Model2TR-FE
Ty p e4-cylinder in line, 4-cycle, gasoline
Bore and stroke3.74  3.74 in. (95.0  95.0 mm)
Displacement164.4 cu.in. (2694 cm3)
Drive belt tensionAutomatic adjustment
Valve clearance
(engine cold)Automatic adjustment
Model1GR-FE
Ty p e6-cylinder V type, 4-cycle, gasoline
Bore and stroke3.70  3.74 in. (94.0  95.0 mm)
Displacement241.4 cu.in. (3956 cm3)
Valve clearance
(engine cold)Automatic adjustment
Drive belt tensionAutomatic adjustment
Fuel typeUnleaded gasoline only
Octane rating87 (Research octane number 91) or higher
Fuel tank capacity23.0 gal. (87.0 L, 19.1 Imp. gal.)

624 6-1. Specifications
4RUNNER_U
■Gasoline quality standards
● Automotive manufacturers in the U.S.A., Europe and Japan have devel-
oped a specification for fuel quality called the World-Wide Fuel Charter
(WWFC), which is expected to be applied worldwide.
● The WWFC consists of four categories that are based on required emis-
sion levels. In the U.S., category 4 has been adopted.
● The WWFC improves air quality by lowering emissions in vehicle fleets,
and improves customer satisfaction through better performance.
■ Recommendation of the use of gaso line containing detergent additives
● Toyota recommends the use of gasoline that contains detergent additives
to avoid the build-up of engine deposits.
● All gasoline sold in the U.S.A. contains detergent additives to clean and/
or keep clean intake systems.
■ Recommendation of the use of cleaner burning gasoline
Cleaner burning gasoline, including reformulated gasoline that contains oxy-
genates such as ethanol or MTBE (Methyl Tertiary Butyl Ether) is available in
many areas.
Toyota recommends the use of cleaner burning gasoline and appropriately
blended reformulated gasoline. These types of gasoline provide excellent
vehicle performance, reduce vehicle emissions and improve air quality.
■ Non-recommendation of the use of blended gasoline
● Toyota allows the use of oxygenate blended gasoline where the oxygen-
ate content is up to 10% ethanol or 15% MTBE.
● If you use gasohol in your vehicle, be sure that it has an octane rating no
lower than 87.
● Toyota does not recommend the use of gasoline containing methanol.

625
6-1. Specifications
6
Vehicle specifications
4RUNNER_U
■
Non-recommendation of the use of gasoline containing MMT
Some gasoline contains an octane enhancing additive called MMT (Methyl-
cyclopentadienyl Manganese Tricarbonyl).
Toyota does not recommend the use of gasoline that contains MMT. If fuel
containing MMT is used, your emission control system may be adversely
affected.
The malfunction indicator lamp on the instrument cluster may come on. If
this happens, contact your Toyota dealer for service.
■ If your engine knocks
● Consult your Toyota dealer.
● You may occasionally notice light knocking for a short time while acceler-
ating or driving uphill. This is normal and there is no need for concern.
NOTICE
■Notice on fuel quality
● Do not use improper fuels. If improper fuels are used, the engine will be
damaged.
● Do not use leaded gasoline.
Leaded gasoline can cause damage to your vehicle’s three-way catalytic
converters causing the emission control system to malfunction.
● Do not use gasohol other than the type previously stated.
Other gasohol may cause fuel system damage or vehicle performance
problems.
● Using unleaded gasoline with an octane number or rating lower than the
level previously started will cause persistent heavy knocking.
At worst, this will lead to engine damage.
■ Fuel-related poor driveability
If poor driveability is encountered after using a different type of fuel (poor hot
starting, vaporization, engine knocking, etc.), discontinue the use of that type
of fuel.
■ When refueling with gasohol
Take care not to spill gasohol. It can damage your vehicle’s paint.

655
Alphabetical index
4RUNNER_U
Engine
Compartment........................ 495
Engine switch ............... 164, 167
Hood ..................................... 494
How to start the engine .................. 164, 167
Identification number ............ 611
If the engine will not start...... 590
Ignition switch ............... 164, 167
Overheating .......................... 603
Engine compartment cover .... 497
Engine coolant Capacity ............................... 616
Checking .............................. 503
Preparing and checking before winter ...................... 275
Engine coolan t temperature
gauge ..................................... 182
Engine immobilizer system .... 106
Engine oil Capacity ............................... 614
Checking .............................. 498
Preparing and checking before winter ...................... 275
Engine oil maintenance
data ........................................ 501
Engine switch .................. 164, 167
Event data recorder ................ 563 Floor mat...................................449
Fluid
Brake .....................................505
Power steering ......................507
Washer ..................................512
Fog lights
Replacing light bulbs .............541
Switch....................................204
Wattage .................................622
Four-wheel drive system ............................223, 226
Front passenger occupant
classification system ............129
Front passenger’s seat belt reminder light .................568
Front seats Adjustment ..............................61
Front side marker light
Replacing light bulbs .............541
Switch....................................198
Wattage .................................622
Front turn signal lights
Replacing light bulbs .............541
Switch....................................179
Wattage .................................622
Fuel Capacity ................................613
Fuel gauge ............................182
Fuel pump shut off system ....562
Gas station information .........664
Information ............................623
Refueling ...............................102
Type ......................................613
Fuel door...................................102
Fuel filler door ..........................102
Fuel pump shut off system ....................................562
Fuses.........................................531F

664
4RUNNER_U
GAS STATION INFORMATION
CTHPIAS030
Auxiliary catch leverP. 4 9 4Fuel filler doorP. 102
Hood lock release lever
P. 494
Tire inflation pressure
P. 621
Fuel tank capacity23.0 gal. (87.0 L, 19.1 Imp. gal.)
Fuel typeUnleaded gasoline only P. 613
Cold tire inflation
pressureP. 6 2 1
Engine oil capacity
drain and refill
(Reference)
With filter
Without filter
2.7 L 4-cylinder (2TR-FE) engine
6.1 qt. (5.8 L, 5.1 Imp. qt.)
4.0 L V6 (1GR-FE) engine
6.6 qt. (6.2 L, 5.5 Imp. qt.)
2.7 L 4-cylinder (2TR-FE) engine
5.4 qt. (5.1 L, 4.5 Imp. qt.)
4.0 L V6 (1GR-FE) engine
6.0 qt. (5.7 L, 5.0 Imp. qt.)
Engine oil type“Toyota Genuine Motor Oil” or equivalent
Oil grade: ILSAC multigrade engine oil P. 614
Recommended oil viscosity: SAE 0W-20