display TOYOTA 4RUNNER 2011 N280 / 5.G Navigation Manual

2
BASIC OPERATION
AUDIO Button Set the radio station presets, adjust the balance and tone controls.
ZOOM IN/ZOOM OUT Icons Touch to magnify or reduce the map scale.
DISPLAY Button Adjust the contrast, brightness or turn off the screen.
SETUP Button Adjust Preferences for: General Settings, Clock, Voice, Navigation, Phone, Audio, and Vehicle Maintenance.
MAP/VOICE Button Repeat the last voice guidance prompt, cancel the map scrolling feature, or display the current position.
DESTINATION Button Input the destination by one of several methods.
INFO/PHONE Button Access Phone, Map Data, and Calendar.
CURRENT VEHICLE POSITION MarkIndicates the current position of the vehicle and its directional heading.
NORTH-UP OR COMPASS MODE IconTouch to change the map display between North-up or Head-up perspectives.
£
Ó
Î
{
x
È
Ç
n
TUNE-FILE PWR VOL
SEEK TRACK
DEST
SETUP
MAPVOICE
FM
AM
SAT
CD
AUX
AUDIO DISP
.
CLOSE.
INFO PHONE.
PWR VOL TUNE FILE
2
3
5
89
7
6
41
™

3
DESTINATION INPUT
BY ADDRESS
Press the DEST panel button
followed by .
Touch and move
to step 4. To change Search Area, touch and move to step 3.
Input the city name and touch .
Touch the desired city name. Input the street name and touch .
Select the desired Search Area and touch .
step1step2
step3step4
step5step6
Quick Tip - Enter the street name without prefi xes such as North or the letter N. The system will display the base street name without prefi xes or suffi xes on the next screen.

7
DESTINATION INPUT - POINT OF INTEREST (POI)
POINT OF INTEREST BY NAME
Quick Tip - Touching next to the POI name will display the address and telephone number.
Press the DEST panel button
followed by .
Touch .
Input the POI name and touch . Use or to scroll up or down. Touch the desired destination.
Touch .
step1step2
step3step4
step5
See page 15 to select desired Route Preference. Touch to start route guidance.
step6
Quick Tip - If the POI isn’t listed in the database verify the spelling and Search Area for accuracy.

9
DESTINATION INPUT - POINT OF INTEREST (POI)
POINT OF INTEREST BY CATEGORY - VOICE RECOGNITION
Press on the steering wheel.
After the beep say, “Destination.”
After the beep say, “Point of
Interest.”
After the beep say, “Near Here.” After the beep say, “Hotels.” See page 22 for the list of recognized POI categories in addition to those displayed on the screen.
After the beep say the number that corresponds to the desired destination.
step1step2
step3step4
step5
After the beep say, “Enter” to confi rm destination. Touch to start route guidance.
step6
Quick Tip - If you know your next command,
you can press at any time to interrupt the prompt. Speak your command after the beep.

11
SET HOME
Input the street name and touch .
Touch followed
by to change the home icon.
Touch the desired icon for
your home. Touch at the bottom right of the Edit Home screen.
step8
step9
step11step12
Touch the desired city name. step7
Touch the desired street name. Input the house number and touch . step10
Quick Tip - Enter the street name without prefi xes such as North or the letter N. The system will display the base street name without prefi xes or suffi xes on the next screen.

13
CALLING BY VOICE RECOGNITION
After the beep say, “Dial by Number.”
Call is active when is indicated. To end call, press
on the screen or on the steering wheel.
step2
step3
step5
Press on the steering wheel. After the beep say, “Phone.”step1
After the beep say the phone number digits individually, without pausing (e.g. “Three, one, zero, four…”).
After the beep, say “Dial” or
press on the steering wheel.
step4
Quick Tip - A noisy environment may prevent the voice recognition system from understanding your commands. It is recommended that you reduce background noise (including passenger conversation and wind noise) prior to using the Voice Recognition system.
Quick Tip - If you know your next command,
you can press at any time to interrupt the prompt. Speak your command after the beep.
Some Bluetooth® equipped cell phones may or may not show battery or signal strength on the display.
DIAL BY NUMBER

16
CLOCK SETTINGS
ADDITIONAL NAVIGATION FEATURES
LANGUAGE
PRESS SETUP PANEL BUTTON >
Select Language Preference: English, French or Spanish.
PRESS SETUP PANEL BUTTON >
Adjust the Voice Guidance volume level.
BEEP SETTING VOICE VOLUME
AUTO SCREEN CHANGE
PRESS SETUP PANEL BUTTON >
Once the screen transition is switched off, the audio screen will remain without reverting to the map display.
PRESS SETUP PANEL BUTTON >
Adjust the Beep sound On or Off.
PRESS SETUP PANEL BUTTON >
Disables system guidance for voice commands. Only on-screen guidance will be available when switched off.
VOICE RECOGNITION GUIDANCE
PRESS SETUP PANEL BUTTON >
Adjust the Time Zone, Daylight Saving Time or manually adjust the clock.

18
Route guidance with fl ow information and traffi c events.
Accidents and disabled vehicles.
Traffi c events - road construction.
XM NavTraffi c® integrates with your navigation system to display traffi c information.
Traffi c events and fl ow data are updated every 2 minutes from a variety of sources.
XM NavTraffi c® service is available in 100 major metropolitan areas across the US
and Canada with more to come.
New 4RUNNER owners with factory-installed navigation receive a
90-day complimentary trial subscription from XM.
Traffi c information provided by XM NavTraffi c®:
http://www.xmradio.com/navtraffi c/index.xmc
XM NAVTRAFFIC®

19
Press the MAPVOICE panel
button followed by .
step1step2
XM NAVTRAFFIC® PREFERENCES
Touch . When the yellow bar appears, the preference has been selected. Touch , traffi c fl ow is displayed by colored lines alongside freeway or highways:
SHOW XM NAVTRAFFIC® INFORMATION
Free fl ow traffi c Moderate traffi c Heavy congestion
Press the SETUP panel button
followed by . step1step2Touch .
AUTO AVOID TRAFFIC
step3
Select from the Auto Avoid Traffi c option. Touch followed by . The system will automatically select another route when moderate or heavy traffi c is detected during route guidance.
XM NAVTRAFFIC®

20
Press the SETUP panel button
followed by . step1step2Touch to display Traffi c Voice Guidance option on page 2. Select to receive voice notifi cation of traffi c events within 20 miles along the current route. Touch followed by .
TRAFFIC VOICE GUIDANCE
Press the SETUP panel button
followed by . step1step2Touch .
SHOW FREE FLOWING TRAFFIC
step3
Select from the Show Free Flowing Traffi c option. Touch followed by . Free fl owing traffi c is illustrated by arrows on the map.
XM NAVTRAFFIC®
XM NAVTRAFFIC® PREFERENCES