tire TOYOTA AVALON 2008 XX30 / 3.G Navigation Manual

BASIC FUNCTIONS
42
“”: Select this switch when you have
several destinations to go. The distance
and time from the current position to the
destination can be displayed for each des-
tination. When you are not traveling on the
route, however, only the distance is dis-
played.
INFORMATION
The distance to your destination
appears on the left of the screen.
The time to your destination can
also be displayed. (For the setting
steps, see page 108.)
Selecting these
switches changes the
guidance screen.
Selecting these switches
changes the map screen.
“Searching condition”: To change the
condition for reroute. (For details, see
page 101.)
“Del. next dest.”: To delete the setting of
the next destination.
“Delete preferred road”: To delete the
preferred road that you registered.
“Start from adjacent road”: To start the
route guidance from the adjacent road.
(ex. When the route guidance guides the
route on a freeway, but you drive on the
parallel way along a freeway.)
“Detour for”: To change the condition for
detour. (For details, see page 50.)
“Whole route”: To calculate an entire new
route to the destination.

BASIC FUNCTIONS
51
When you select the “Chg. route”switch, the screen changes to the “Change
route” screen that allows you to select the
distance you want to detour. Select one of
the numeral keys to start the detour pro-
cess. After detouring, the system returns
to the original guidance route.
“Whole route”: If you select this switch,
the system will calculate an entire new
route to the destination.
INFORMATION
When your vehicle is on a freeway,
the detour distance selections are
5, 15 and 25 miles.
The system may not be able to cal-
culate a detour route depending on
the selected distance and sur-
rounding road conditions.
“Search condition”: To change the con-
ditions of the searching route. (See page
101.)
“Quick”: A route on which you can reach
the destination in the shortest time.
“Short”: A route on which you can reach
the destination in the shortest distance.
“Alternative”: Other route.Points of interest such as gas stations
and restaurants can be displayed on
the map screen. You can also set their
location as a destination and use them
for route guidance.
To display a particular type of point of
interest on the screen, select the
“POI” switch on the map right side of
the screen.
A window with a limited choice of points of
interest will be displayed. When you select
your desired type of point of interest, icons
will appear on the map screen indicating
where the POI addresses are located.
“More”: If you cannot find your desired
point of interest on the limited choice
screen, select this switch. The screen then
displays the more “Point of Interest” listing
screen.
You can show up to 5 types of icons on the
screen.
Displaying points of interest

BASIC FUNCTIONS
55
3. The screen will change to the “En-
tire route map” screen, push the “EN-
TER” button on the navigation con-
troller to display the menu switches.
And then select the
“Turn list”switch.
You can scroll through the list of roads.
However, not all road names in the route
may appear on the list. If a road changes
its name without requiring a turn (such as
on a street that runs through two or more
cities), the name change will not appear on
the list. The street name closest to the
starting point will be displayed with a mile-
age to the next turn.
These marks indicate the
direction which you
should turn at an
intersection.
Select the “Map” switch on the “Turn list”
screen of your desired point. The point
which you choose is displayed on the map
screen.
INFORMATION
The current vehicle position mark
appears at the bottom of the
screen next to the name of the
street you are driving on. The mark
does not move.
If you leave the guidance route, the
name of the street you are on is not
shown on the list next to the cur-
rent vehicle position mark.
If the road type you are on changes
between a highway, a main street
or a residential street (at an inter-
change or fork), it will appear on
the turn list.
If a long route has been selected, it
may take a long time to display the
turn list.
Push the
“MAP/VOICE” button
on the navigation controller to re-
turn to the map display with route
guidance.

BASIC FUNCTIONS
59
When your vehicle is not receiving signals
from the satellites, the “GPS” mark does
not appear at the screen.
The GPS signal may be physically ob-
structed, leading to inaccurate vehicle
position on the map display. Tunnels, tall
buildings, trucks, or even the placement of
objects on the instrument panel may ob-
struct the GPS signals.
The GPS satellites may not send signals
due to repairs or improvements being
made to them.
Even when the navigation system is re-
ceiving good GPS signals, the vehicle
position may not be shown accurately or
inappropriate route guidance may occur in
some cases.
NOTICE
The installation of window tinting
may obstruct the GPS signals. Most
window tinting contains some metal-
lic content that will interfere with GPS
signal reception of the antenna in the
instrument panel. We advise against
the use of window tinting on vehicles
equipped with navigation systems.
(a) Accurate current vehicle position
may not be shown in the following
cases:
When driving on a small angled Y−
shaped road.
When driving on a spiral road.
When driving on a slippery road such
as in sand, gravel, snow, etc.
When driving on a long straight road.
When freeway and surface streets run
in parallel.
After moving by ferry or vehicle carrier.
When a long route is searched during
high speed driving.
When driving without setting the cur-
rent position calibration correctly.
After repeating a change of directions
by going forward and backward, or
turning on a turntable in the parking lot.
When leaving a covered parking lot or
parking garage.
When a roof carrier is installed.
When driving with the tire chains
installed.
When the tires are worn.
After replacing a tire or tires.
When using tires that are smaller or
larger than the factory specifications.
When the tire pressure in any of the
four tires is not correct.
INFORMATION
If your vehicle cannot receive GPS
signals, you can correct the current
position manually. For the informa-
tion on setting the current position
calibration, see page 95.

BASIC FUNCTIONS
60
(b) Inappropriate route guidance may
occur in the following cases:
When turning at a wrong intersection
off the designated route guidance.
If you are heading for a destination
without passing through a set preferred
road, automatic rerouting may display
a route returning to the set preferred
road.
When turning at an intersection for
which there is no route guidance.
When passing through an intersection
for which there is no route guidance.
During automatic rerouting, the route
guidance may not be available for the
next turn to the right or left.
It may take a long time to operate auto-
matic rerouting during high speed dri-
ving. In automatic rerouting, a detour
route may be shown.
During automatic rerouting, the route
may not be changed.
The route in a U−turn may be shown or
announced.
A location may have multiple names
and the system will announce one or
more.
Some routes may not be searched.
If the route to your destination includes
gravel, unpaved roads or alleys, the
route guidance may not be shown.
Your destination point might be shown
on the opposite side of the street.
When a portion of the route has regula-
tions prohibiting the entry of the vehicle
that vary by time or season or other
reasons.
The road and map data stored in your
navigation system may not be com-
plete or may not be the latest release.After replacing the tire, implement the
operation described in the “Current
position calibration”. (For details, see
page 95.)
This navigation system uses tire turning
data and is designed to work with factory−
specified tires for your Toyota. Installing
tires that are larger or smaller than the orig-
inally equipped diameter may cause inac-
curate display of the vehicle’s position.
The tire pressure also affects the diameter
of the tires so please make sure the tire
pressure of all four tires is correct.

BASIC FUNCTIONS
61
Map database is made based on the
maps, 2006 edition of DENSO, whose
information source comes from
NAVTEQ maps, Tele Atlas maps and
infoUSA POIs.
2005 NAVTEQ. All rights reserved.2005 Tele Atlas North America, Inc.
All rights reserved. This material is pro-
prietary and the subject of copyright
protection and other intellectual prop-
erty rights owned by or licensed to Tele
Atlas North America, Inc. The use of
this material is subject to the terms of a
license agreement. You will be held li-
able for any unauthorized copying or
disclosure of this material.
Data by infoUSA Copyright
2005, All
Rights Reserved.
This product contains proprietary and
confidential property of NAVTEQ, Tele
Atlas and infoUSA. Unauthorized use,
including duplication of this product is
expressly prohibited.There are two types of areas available
for route guidance. (See the following
pages.) In one type of area, primarily
around metropolitan centers, detailed
route guidance is available for the en-
tire area. In the other type of area, all
roads are displayed on the map but
route guidance is limited. The naviga-
tion route might lack precision because
the data (no right turns, oneway traf-
fic, etc.) is not complete. It is still pos-
sible to reach the destination by follow-
ing the arrow direction and distance as
shown on the bottom left of the screen.
The arrow points in the direction of the
destination. The distance shown is as
measured in a straight line from the cur-
rent vehicle position to the destination
area.
COPYRIGHT NOTICE: This area in-
cludes information taken with permis-
sion from Canadian authorities, includ-
ing
Her Majesty the Queen in Right of
Canada, Queen’s Printer for Ontario.
Map database information
and updates

BASIC FUNCTIONS
64
Some States, Territories and
Countries do not allow certain li-
ability exclusions or damages limi-
tations, so to that extent the
above may not apply to you.
Export Control.
You agree not to
export from anywhere any part of
the Data provided to you or any
direct product thereof except in
compliance with, and with all li-
censes and approvals required
under, applicable export laws,
rules and regulations.
Entire Agreement.
These terms
and conditions constitute the en-
tire agreement between [CLIENT]
(and its licensors, including their
licensors and suppliers) and you
pertaining to the subject matter
hereof, and supersedes in their
entirety any and all written or
oral agreements previously exist-
ing between us with respect to
such subject matter.
Governing Law.
The above
terms and conditions shall be
governed by the laws of the
State of Illinois [insert “Nether-
lands” where European NAVTEQ
Data is used], without giving ef-
fect to (i) its conflict of laws pro-
visions, or (ii) the United Nations
Convention for Contracts for the
International Sale of Goods,
which is explicitly excluded. You
agree to submit to the jurisdiction
of the State of Illinois [insert
“The Netherlands” where Euro-
pean NAVTEQ Data is used] for
any and all disputes, claims and
actions arising from or in connec-
tion with the Data provided to
you hereunder.
Government End Users. If the
NAVTEQ Data is being acquired
by or on behalf of the United
States government or any other
entity seeking or applying rights
similar to those customarily
claimed by the United States
government, (i) for acquisitions
conducted by the Department of
Defense, the NAVTEQ Data is li-
censed with ”Limited Rights” in
accordance with the rights set
forth at DFARS
252.227−7013(b)(3), TECHNICAL
DATA−NONCOMMERCIAL
ITEMS, and NAVTEQ Data deliv-
ered or otherwise furnished with
”Limited Rights” shall be marked
with the following ”Limited Rights
Notice” set forth at DFARS
252.227−7013(f)(3), and shall be
treated in accordance with such
Notice:

BASIC FUNCTIONS
69
U.S. GOVERNMENT RIGHTS
If you are an agency, depart-
ment, or other entity of the
United States Government, or
funded in whole or in part by the
United States Government, then
use, duplication, reproduction, re-
lease, modification, disclosure or
transfer of this commercial prod-
uct and accompanying documen-
tation, is restricted in accordance
with the LIMITED or RE-
STRICTED rights as described in
DFARS 252.227−7014(a)(1) (JUN
1995) (DOD commercial comput-
er software definition), DFARS
227.7202−1 (DOD policy on com-
mercial computer software), FAR
52.227−19 (JUN 1987) (commer-
cial computer software clause for
civilian agencies), DFARS
252.227−7015 (NOV 1995) (DOD
technical data − commercial
items clause); FAR 52.227−14 Al-
ternates I, II, and III (JUN 1987)
(civilian agency technical data
and noncommercial computer
software clause); and/or FAR
12.211 and FAR 12.212 (commer-
cial item acquisitions), as appli-
cable.
In case of conflict between any
of the FAR and DFARS provi-
sions listed herein and this
Agreement, the construction that
provides greater limitations on
the Government’s rights shall
control. Contractor/manufacturer
is Tele Atlas North America, Inc.,
11 Lafayette Street, Lebanon, NH
03766−1445. Phone: 603.643.
0330. The DATABASE is
©1984−2005 by Tele Atlas North
America, Inc. ALL RIGHTS RE-
SERVED. For purpose of any
public disclosure provision under
any federal, state or local law, it
is agreed that the DATABASE is
a trade secret and a proprietary
commercial product and not sub-
ject to disclosure.If you are an agency, depart-
ment, or other entity of any State
government, the United States
Government or any other public
entity or funded in whole or in
part by the United States Gov-
ernment, then you hereby agree
to protect the DATABASE from
public disclosure and to consider
the DATABASE exempt from any
statute, law, regulation, or code,
including any Sunshine Act, Pub-
lic Records Act, Freedom of In-
formation Act, or equivalent,
which permits public access and/
or reproduction or use of the Li-
censed Products. In the event
that such exemption is chal-
lenged under any such laws, this
Agreement shall be considered
breached and any and all right to
retain any copies or to use of the
DATABASE shall be terminated
and considered immediately null
and void. Any copies of the DA-
TABASE held by you shall imme-
diately be destroyed. If any
court of competent jurisdiction
considers this clause void and
unenforceable, in whole or in
part, for any reason, this Agree-
ment shall be considered termi-
nated and null and void, in its
entirety, and any and all copies
of the DATABASE shall immedi-
ately be destroyed.

ADVANCED FUNCTIONS
96
POSITION/DIRECTION CALIBRATION
1. Move the cursor mark to your de-
sired point by operating the select and
scroll lever of the navigation controller.
Push the
“ENTER” button on the navi-
gation controller.
2. Operate the select and scroll lever
of the navigation controller, so that the
screen direction is facing to your de-
sired direction.
Push the
“ENTER” button on the navi-
gation controller, and then the map screen
will be displayed.TIRE CHANGE CALIBRATION
The tire change calibration function
should be used when the tires are re-
placed. This will adjust for any possible
change in tire circumference from the
old tires to the new ones. If this proce-
dure is not performed when tires are re-
placed, the current vehicle position
mark may become incorrect.
To execute the fast distance tire calibration
procedure, select the
“Tire change”switch on the “Calibration” screen.
The message appears and the fast dis-
tance calibration is automatically started.
A few seconds later, the map screen will be
displayed.

ADVANCED FUNCTIONS
102
You can see the entire route from the
starting point to the destination.
1. Push the “MENU” button on the
navigation controller.
2. Select the “Route overview”switch on the screen. The route over-
view screen appears.
The entire route from the starting point to
the destination is displayed.You can preview the route from the
starting point to the destination.
1. Push the “MENU” button on the
navigation controller.
2. Select the “Route preview”switch on the screen. The route preview
screen appears.
Route overviewRoute preview